Liczymy pasujące modele…
This is a gantry installation hook for voron 2.4. It fits to 2020 extrusions and helps lifting up the gantry to the frame easy. The hook is 12cm long. The lower part is 6mm thick and fits into the extrusion. The upper part has a 2cm wide…
This is a Remix of the Customizable Back Horn Speaker by Chris Hill. I changed the diameter for the speaker chassis to 66mm and made the whole case a little bit smaller. Also there is no extra space for any PCBs. I left some room for…
I wanted something to move my SUP easily when I need to walk some longer way to the river or sea. Commercial stuff from the internet was to expensive and so I build it myself. This SUP Trolley (SUP Finn Wagon, as I call it ;) ) can be…
Minimalistic Bosch Battery Holder - Remix from https://www.thingiverse.com/redkite/designs This version is 2mm higher. I added 2mm to the bottom. Use supports depending on orientation Print Settings Printer Brand: Prusa Printer: Prusa…
keebcu - andimoto7583 mechanical keyboard This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a 75% mechanical keyboard which can be printed on smaller printers such as Prusa Mini. If you want to build the…
Hi, I made a wrist rest for my mechanical keyboard at work. I didn't want to buy a new wooden one for 20€ or more. I printed mine in PLA with two colors. The openscad file is also available. So you can change the form, lenth and depth as…
I saw "DSLR Camera Ornament" by JayPierstorff ( https://www.thingiverse.com/thing:5156802 ) and thought this would be a very nice toy. So I modified the parts and added a CR2025 battery holder from shusy (…
Original Model was created by Jlangphoto. Thanks!
Added “cr2_dim” to scad file to generate a 2x2 battery case! Thanks to kpreid!! https://www.prusaprinters.org/de/social/8504-kpreid/prints
This is a simple casing for the "Adafruit FT232H IO" board. The SCAD files can be downloaded here https://github.com/andimoto/case\_adafruit\_ft232h Assembling the case with 2mm or 2.5mm screws. Print instructions Category: Electronics…
This is a modified version which fits better when panels of voron are installed. Also thickness was reduced to 1mm. It is just a good way to reduce the sharp edges of the extrusion. Thanks to chking for the original file ;).
Case for Bus Pirate v4 (and v3.6) This is a SCAD Model for a Bus Pirate v4 (and v3.6). I added buttons and lightguides for v4. The lid has a lettering "BUSPIRATE4" . Lightguides should be printed with transparent filament. In v3.6 I only…
This is a Yoyo with a rocket on one side and the planet Saturn on the other. More Themes and the OpenSCAD file can be found in my github repo: https://github.com/andimoto/theme-yoyo Note: printing takes about 12 hours on Prusa Mini (with…
This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a smallTKL mechanical keyboard with ISO layout which can be printed on smaller printers such as Prusa Mini. Small TKL is TKL keyboard but squeezed…
this is a small garden project i'm in. i want to connect these sprinklers together and place it in my tomato bed to pour them :). not printed yet! will be tested soon ;) Print instructions Category: Other Summary this is a small garden…
This is a Yoyo with the logos of the Open Source Initiative and Open Source Hardware. More Themes and the OpenSCAD file can be found in my github repo: https://github.com/andimoto/theme-yoyo Note: printing takes about 12 hours on Prusa…
I separated the duplo pins from the digits and added the operators to it. I added a OpenSCAD File, in case someone whats to add more parts or operators to the pins. To use it, just download the original Duplo Digit models and copy the…
Holder for interdental brushes and something other which fit into the cutout. SCAD Model available. Print instructions Printed on a Original Prusa Mini. I printed it on the front so the Mini uses bridging support.
This is a Yoyo with a horse on one side and a horseshoe on the other. More Themes and the OpenSCAD file can be found in my github repo: https://github.com/andimoto/theme-yoyo Note: printing takes about 12 hours on Prusa Mini (with…
This is a box for my ES120 electrical screwdriver, a normal screwdriver and many 4mm hex bits. It also contains 2 chambers to store some loose screws and other things in it. There are also 2 small lids which fits onto the chambers. When…
keebcu - andimoto smallTKL - mechanical keyboard This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a smallTKL mechanical keyboard which can be printed on smaller printers such as Prusa Mini. Small TKL is…
This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a 75+% Q1 Layout mechanical keyboard which can be printed on smaller printers such as Prusa Mini. 75Q1iso means 75% size with Keychron Q1 style keyboard…
This is a Car Fan Funnel. Both bigger parts can be connected with a hose or pipe. This was used to cool down a childs seat in the car when driving in summer at hot temperatures. So the child seat gets cooled. The funnel end has to be…
This is a piggy bank box or donation box which will be used for our Linux-Café (a Sub-Event of a Repair-Café). We install Linux on old Laptops and Computers to save them from being thrown away or left back somewhere inside a cabinet, etc.…
This is a new version of my dental stick holder. I added some more spaces to put dental brushes and more into it. I've printed it on the front. The Prusa Mini does some good bridging here, but the right wall gets pulled to the inside when…
Made a device rack (builder) to stack my router and cable modem to save some space on my sideboard. This "default" configuration can hold devices with one 40mm high one 30mm high (including tolerance > 43mm & 32mm). Maximum device width…
Video: https://i.imgur.com/nMllFgK.mp4 https://i.imgur.com/PkKVFWg.mp4 This is my Endoscope Camera Mount for my Prusa Mini. Several endoscope sizes are available. From M5 - M10. I used a 7mm USB Endoscope camera which I mounted to my…
This is a Frame with a Lug to hold a Clockwork with size 56mm x 56mm. Frame has 20mm height and clockwork has a loose snap fit. Use OpenSCAD script to fit to your need. Repo:…
This is a case for Raspberry Pi 3 B+ and Allo Piano 2.2 DAC . I use this for playing music in my network. I didn't find a proper case for this combination, so I made a model which fits my needs. I did not print this case by myself, I use…
I used this to connect to pipes together. Model is customizable. Uploaded parts need heat set inserts and M3 Screws. OpenSCAD Model can be used to create Parts without heatset inserts. Source Code…
This is a case for Raspberry Pi Zero with a HifiBerry MiniAmp hooked up on top. It was made with my “Parametric Case” Model. Use M2.5 screws to fix the stack at the lid or the case. Lid and Case have a (very tight) snap-fit. Usually it is…
Füße für ein Schwerlastregal von Bauhaus. Winkelgröße: Schlitzbreite 4mm Seitenlänge (Winkel): 45mm Passt es? STL downloaden und im Slicer das Lineal verwenden.
This is a parametric plate holder which holds a plate on an 2020 extrusion. The STL Files can hold a plate with a width of 10mm & a thickness of 1mm. The wall thickness is 1mm on each side, so complete width is 22mm. But as mentioned,…
This is a fan shroud for MPSM v2 which holds 2x 40mm noctua fans and provides separate hodend and part cooling. No further disassambling of your MPSM is needed. Just remove the old fan shroud and relpace it with this one. I also added a…
Remix of a DPS 5005 Case. Added DC Connector with 11mm diameter. Added cutout for USB Controlboard. Case is 30mm longer.
This is a balance board for standing desks. This helps to keep moving a little bit while standing and working. The only thing needed are 3 or 5 cups. If you want to balance completely free, the 2 outer cups can be removed. For the center…
This helps storing remote control and plug safely in this part. Ring has a good fit. It is not to tight. PLA Print took about 3,5h. No Supports! https://github.com/andimoto/things
Parts needed: 3x M3 Nut 2x M3x6 Screw (button head or cylinder head 1x M3x8 or longer… fits on M8 rod my forked Cyclone PCB Repository with my mods branch https://github.com/andimoto/Cyclone-PCB-Factory/tree/andimoto-stuff License…
All Modifications have been created in Prusa Slicer. All 3MF Files are available. This mod can be used with the Tophat / Canopy for Vorons. CYD Case Mods: added 3.5mm holes (distance 30mm) to the Backplate. Voron Removable Doors (from…
New Release of Couchpotato Tools :D These parts are designed for a PocketBook InkPad Color (and InkPad 3) Check out Repository for scad Files fo customizations https://github.com/andimoto/couchpotato Please also post a make. This is a…
Remix of Silouhette
Nice case! I needed some changes... I mostly modified the original parts inside the PrusaSlicer. So if you need to change the changes (like bigger holes, etc) you can make it directly as 3mf files are provided.
Knob Lever for SUP Triple Action Pump. It was very heavy to move the Knob. So I fixed the knob a little bit and also added this Lever to it.
Created a Holder for a Pinda Probe for the Babycube 3D Printer. Model uses Grub Screws M2 to hold the pinda in place. Print in ABS Repository with other Babycube Mods: https://github.com/andimoto/BabyCube/tree/andimoto-mods OpenScad File…
OpenSCAD Model for 5 cylindrical vacuum accessories. Cylinders have a outer diameter of 31mm. I use it to hold the cheaper accessories for Vorwerk VK7 from FSProdukte.
To wszystkie aktualnie dostępne wyniki.
