Liczymy pasujące modele…
Collection of hooks for IKEA SKADIS board - slightly reinforced thickness and tight fit. Hooks from 15 to 65mm Kolekce háčků pro IKEA SKADIS desku - lehce zesílené a pevně padnoucí. Háčky délky 15-65 mm Print instructions No supports…
Updated modified design - big “groove” added on top side, so scredrivers sit in it and cant fall off when accidentaly hit. Universal comb type holder for various tools. Comes in two sizes for bigger and smaller tools. Big - 5 cut outs for…
Organizer for drillbits for IKEA SKADIS board. Three sizes of holders available for most common drill bit sizes. FreeCAD files provided as well, if You need adjustments for different drillbit sizes. Each holder needs 2 hooks to hold on…
Spray can holder for IKEA SKADIS board - fits most typical cans with ca 66 mm diameter, tight fit into the board, slightly reinforced Držák sprejů pro IKEA SKADIS desku - pasují do něj nejběžnější plechovky s průměrem 66mm Print…
Two holders for various bits. Tilted by 30 degrees, so holders can be located close one above another. holes closer to board are deeper and are for longer bits. Print with 2-3 perimeters, 0.4 or 0.6 nozzle, 15% infill, 0.2 layer, but…
Tilted holders for various drill bits - the one with more holes can hold up to 10mm drill bit, the other one up to 15mm drillbit Print with 2-3 perimeters, 15% infill,0.4-0.6mm nozzle, 0.2-0.3mm layer, any material will do. No supports…
Holder for set of electrician scewdrivers (i created it for set of local brand Narex, but i believe it will fit many others). Holder for smaller screwdrivers has holding conus - top diameter is 15.5mm, bottom diameter is 11.7mm Holder for…
Simple wall mounted holder for cable spool and Mennekes Type 2 plug (car side). Model has optional covers for mount holes and also locking clip for cable - so it doesnt slip. Locking clip is "click on" the shaft in the holder. Print as…
This simple holder fits all standard angle grinder discs - no matter if its 115, 125 or 230mm - all have central hole of 22,3mm. Print with 3-4 perimeters and 20-30% infill, as some disc can be pretty heavy. Screw into some wood with…
Holder for analog caliper - if someone is still using these like me :) Držák na starou dobrou analogovou šupléru (posuvné měřítko - abych nebyl bývalými učiteli trestán :D ) Print instructions Default settings are completely OK for this…
Universal holders for various ratchet socket sets. 3 types - for ¼ ½ and ¾ sizes. I suggest to print with 3-4 perimeters (with 0.4 nozzle) - so You dont snap off the little holder cubes when taking off Your socket. Infill - 15% is totally…
Triple holder for various things (power adapters etc) that can be plugged into standard EU socket. There is a horizontal and vertical variant. Holder is tilted and inserted things fit snugly in and dont fall off. 2 hooks are needed for…
Holder for most measure tapes ranging from roughly 3 -5 m. One holder needs 2 hooks - all printed separately. FreeCAD file attached for Your adjustments if needed. Držák na většinu svinovacích metrů v rozmezí 3-5 m. Jeden držák potřebuje…
Chisel set holder (or any other tool that fits) Print with 2-3 perimeters, 15% infill,0.4-0.6mm nozzle, 0.2-0.3mm layer, any material will do. No supports needed, print as shown on picture. 2 hooks needed for attachment to the board,…
Description Custom modelled splint (fixture) for broken thumb. Fixes the last phalanx and knuckle, while doesnt restrict its movement in the big knuckle near Your palm. There are two models - normal and one called “wider” for bigger…
Simple wall mount holder for various pipes. I use it to hold wiring pipes - both flexible and rigid. One screw with countersunk head and diameter of 4,5-5mm is ideal for installation of this holder. The pipe can then be just “clicked"…
Simple holder for majority of cordless drills / screwdrivers as they all have similar shapes. Groove for motor area has 61 mm diameter, groove for front area near chuck has 55 mm diamater. Distance between holding grooves is 90mm - it…
Tiny holder / stand for tiny interdental brushes - which always lay all around the bathroom :D Most usual types will fit in some of the holes. Freecad file included for adjustments. Malý držáček / stojánek na mezizubáky. Většina kartáčků…
Use for various garden tools like small shovels, hammers, small hoes and whatever You need. Better go with 3-4 perimeters and 25% infill. PETG is ideal, if You have the holders in exterior - so they survive winter etc. But any material…
New version of my holder for EV charger cable Type 2 (Mennekes). It has tilted slot for charging gun, so it fits more cramped places. Slot has drain hole - so the moisture buildup can flow away. Its mounted by scews with countersunk head…
Supportless holder for headphones - mounted under some shelf or rack with two screws. Mounting holes for countersunk head screws with shaft up to 4-4,5mm. Two variations - 25mm (1") and 35mm (1,4") depth for various thickness of headband…
Pretty strong console for shelf or rack - depth of console is 140 mm (5,5"). Mounting holes are for screws with countersunk head and up to 5mm shaft (not sure what US measure would be, sorry) I suggest printing from PETG with CF filling…
A simple snap-on holder for 28mm RFID chips / tags. They tend to break their original hole for attachment to key ring or some rope. And if You want still to use Your chip - then here is the snap-on that will tightly hold Your chip / tag.…
Simple shaper / limiter / holder for various stems or smaller twigs. I use it to keep some twigs more upward growing and not “crawling” on ground. Models with 3x, 4x, 5x and 6x have several “catching hooks” and all have 150mm diameter.…
Christmas tree from several parts - they fit even without glue, but i prefer to glue them together Vánoční stromeček z několika částí - drží pohromadě i bez lepidla, ale pro jistotu bych to lepil ... Print instructions Print each part…
Simple holder for electric vehicle (EV) charger with Type 2 (Mennekes) connector. Connector is slightly tilted, holds in place safely. Prusa spool is used for holding the cable, which can be pretty heavy, depending on length. I suggest…
Set of various trays / bowls / boxes (whatever You call them :D) for IKEA SKADIS pegboard. Name of each STP file is in this format: Tray_WxDxH - 1st number (W) = Width in mm, 2nd number (D) = Depth in mm, 3rd number (H) = height in mm…
Decorative holder for so called "air plants" (Tillandsia) which dont need soil. Its variable design connected from left and right corners and as many (or none) central pieces. Its connected by simple pegs (also printed) and pressure - no…
Simple building kit of a Christmass tree. No glue is needed - everything snaps in. Tree consists of a trunk, bottom, middle and top parts. But as they are locked via bayonette lock, You can have more than just 3 piece tree. “Normal” tree…
Token for shopping carts in EU with various imprints. Now there are available pictures of mouse, hamster, Christmass tree and Easter Egg. Ill try to add more in the future. Size of coin/token is 24.5mm x 2.6mm I suggest printing with 2-4…
To wszystkie aktualnie dostępne wyniki.
