Liczymy pasujące modele…
This is a no cut mod support for a 0530 solenoid (without the rod) model to fit in a Namco GunCon 2 made to be compatible with Gun4IR official PCBs. Solenoid model 0530 comes in different varieties 0530, 0530B, 0530T. The two with the B…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I was looking for something to help nurture my 10-year old budding artist…
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
This is the EW 160E set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
Replacement piece OMAR IKEA 10055941 / 130531 to adjust the height
This model is compatible with the lego system.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
This is a no cut mod support for a 0530B solenoid model to fit in a Namco GunCon 45 made to be compatible with Gun4IR official PCBs. The model is composed of two parts that are glued together on their flat surface for printing without…
This is a camper add-on I made for PM-2170534 car. It's the blue pickup with yellow stripes from the speedboat set. I printed it with 0.2 layer height normal matte pla, and it's a friction fit if you paint it. I didn't make this to scale.…
This is a bracket for the JF-0530B solenoid. Which you can buy here, for example: Link to Aliexpress The holes in the bracket are designed for M3 screws. Print instructions 0.4mm nozzle 0.2mm layer height 20% infill use brim PETG is a…
This model is compatible with the lego system.
This model is compatible with the lego system.
I recommend using tree support for the TMP36 holder bridge so the support is not really affecting the TMP36 sensor slot. Insert the TMP36 sensor from the inside by passing the legs through the opening before installing the solenoid
Bmw E30, E28 - rear sun shade hook holder. OEM-numbers: 82 12 9 413 177, 51461905393 Reproduced with the example of original part. There's 2 versions attached: ORIG - original fastening dimensions used. Was bad for my case, poorly fitted…
This is a front bumper retainer for my 2000 WJ Jeep Grand Cherokee Limited. I'm assuming it is the same for all 1999 - 2004 WJ Jeep Grand Cherokees, and you can't really mistake this for any other body fastener I have seen. It is fully…
Honeycomb Wall mount for the Klein 11053 and 11057 (and possibly others)
This model is compatible with the lego system.
This model is compatible with the lego system.
Subaru Forester SJ Cover Catcher Subaru OEM PNs: 94053AL100; 94053FJ000 Print inclined with organic supports, using the print post in the model itself. This reduces supports and keeps visible surfaces clean of support remains. Print post…
Mount using LocLine ¾ ball adapter that can attach to a stand /tripod or custom / commercial phone mount using captive bolt or nut (UNC ¼-20, usually 0.9-1.0in long). Model was built using…
Persian carries an air of elegance and confidence, with its sleek body and poised stance. In this low-poly style, its smooth fur becomes a series of refined geometric surfaces, emphasizing its streamlined shape. The angular curves of its…
Maschinenraum Blende mit Dekoderhalter für einen TAMS LD W/G 42 für Artikelnummer 3053 und 3054 von Märklin.(E03 bzw 103 Elektrolokomotive in H0). Damit das Licht vom Maschinenraum nicht in den Führerstand strahlt. Mit einer weiteren…
Für einen Flipper benötigte ich eine Halterung zu den Heschen Spulen HS-0530B. Diese haben 12V 5N und 10mm Hub. Die Löcher zur Befestigung mit M3 sind hier exakt passend. Die Befestigungslöcher am Boden haben 3,5 mm Durchmesser. Die…
Tool holder for 3/8 inch sockets. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 35mm W - 51,99mm H - 54,98mm We design all…
CZ - pro montáž dávkovače saponátu nebo otoč. sítkového ventilu EN - for mounting a detergent dispenser or a rotary strainer
This is going to be one of those "I don't want to support it but you can have it if you want" uploads. I like it, it works really well. You'll need some M3 heatsets and screws for the spring rest and tensioner. Besides that, it's mostly…
Throttle cable retaining clip for Suzuki, part number 09403-05311 The model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny. Designed as a direct replacement for broken or brittle…
Instructions: You will need a 4 or more (just snap to size) pin header that can be inserted with a pair of pliers, than just remove the original plastic spacer and press them through until ~3 mm are out the back (just reference other…
Just a simple box for Frozen porcelain tea set. Use 2x M3 16mm and 6x magnets 6x3 mm (leftovers from the Voron 2.4 kit :D ) Add magnets in pairs. One in the box and one in the lid to make sure they work properly and you can open the box…
This is a quick remix of the front shroud for the M0053-1. I tapered the front of the picatinny rail because I didn't like how suddenly it looked like the front of the blaster was cut off. I also merged it with a spacer, providing 1.5mm…
Just a simple mostly cosmetic end piece. Requires two M4x18mm or M4x20mm screws + nuts to be attached.
This model serves as a replacement reversing lever for BLACK & DECKER drills. It is compatible with EPC12, EPC14, EPC14L, EPC18, EPC96, EPL14, and EPL143 models. For optimal strength, I recommend using PETG with a 100% infill.…
I wanted something to put my face on when using the 1 degree riser on the M0053-1, so I made this nice model that just snaps in place. It's got a slight curve too the shape so it really is quite comfortable. There are two versions, one…
Salvaorejas para que no te hagan daño las mascarillas. https://youtube.com/shorts/Q4rAAvMik6A
The part contains two parts, you need to apply acrylic glue and slide them together.
This is hook for Lego Minifigure Frame Skechup file included Category: Toys & Games
To be printed in a material like PETG or Nylon with supports
This is a 1-piece replacement for the original Fisher And Paykel button support used in models DW60OUC2X, DW60OUC6X, DW60OUC6B.DW60OUC2X, DW60OUC6X, DW60OUC6B. Click here for instructions on how to replace it .
I wanted to mount my 3/8" Milwaukee Ratchet (3053-20) on my OpenGrid board but couldn't find any existing models for it. This is a two part mount, one part holds the head of the ratchet and the other supports the body. The back of these…
2x3 Gridfinity bin for Biltema 12053
Hi, so I had a problem searching switch for my impact, others were smaller ones that I found, so I decided to make a new one that matches mine.
If your Data General Dasher D2 (6053) has broken or missing knobs on the frame, this print can serve as a replacement! Both files use a 5/16"-18 TPI nut that uses a 1/2" wrench. The specific one I used can be found at Home Depot with SKU…
This adapter lets you convert the Bestway Saluspa Hot tubs using the P07805 filter housing to the more common and available P05343 housing with screw threads. I ran into this issue with my saluspa hermosa inflatable hot tub that uses the…
Some time ago I've build a simple cigarbox synth out of a famous german MAKER magazine ... . But I don't want to use a simple cigarbox as enclosure. So I've created this. The printing was done with "glow in the dark" red PLA and mint…
Franke replacement part 133.0533.532 for installing the detergent dispenser. / Franke náhrada za diel 133.0533.532 pre inštaláciu nádobky na saponát.
Remifront IV Halter Blech 10053478 für Fahrer und Beifahrertüre
Parametric 7.3cm tall object with rounded circular geometry and a dune pattern. Engineered for precise 3D printing.
Parametric 7.3cm tall object with rounded circular geometry and a ripple pattern. Engineered for precise 3D printing.
Parametric 8.3cm tall object with rounded circular geometry and a bark pattern. Engineered for precise 3D printing.
Throttle cable retaining clip for Suzuki, part number 09403-05311 The model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny. Designed as a direct replacement for broken or brittle…
This is the EW 160E set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
Some time ago I've build a simple cigarbox synth out of a famous german MAKER magazine ... . But I don't want to use a simple cigarbox as enclosure. So I've created this. The printing was done with "glow in the dark" red PLA and mint…
Franke replacement part 133.0533.532 for installing the detergent dispenser. / Franke náhrada za diel 133.0533.532 pre inštaláciu nádobky na saponát.
