47053-1000 4-Pin fan header (470531000)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Molex® compatible 47053-1000 4-Pin fan header (470531000) that was modified to be printable
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 2
- Wyświetlenia
- 102
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Open Community License v1
Instructions:
You will need a 4 or more (just snap to size) pin header that can be inserted with a pair of pliers, than just remove the original plastic spacer and press them through until ~3 mm are out the back (just reference other headers).
Printing instructions:
No support
Layer height <=.15
the print needs to be in the same orientation as the pictures otherwise the clip will snap
Notes:
Normal pin headers are smaller than the official connector, this could lead to improper connections, depending on the connector counterpart.
Use a high temperature filament and keep the heating while soldering minimal to avoid melting. If it gets soft don't apply pressure on the pin and just net it cool down before soldering the next pin.