1 / 4
47053-1000 4-Pin fan header (470531000) — image 1
1 / 4

47053-1000 4-Pin fan header (470531000)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a Molex® compatible 47053-1000 4-Pin fan header (470531000) that was modified to be printable

Rating
5 / 5
Likes
4
Downloads
22
Makes
2
Views
98
Reviews
2

Updated at source:

Model information

Category
Electronics
License
Open Community License v1

Instructions:

You will need a 4 or more (just snap to size) pin header that can be inserted with a pair of pliers, than just remove the original plastic spacer and press them through until  ~3 mm are out the back (just reference other headers). 

Printing instructions:

  • No support

  • Layer height <=.15

  • the print needs to be in the same orientation as the pictures otherwise the clip will snap

Notes:

Normal pin headers are smaller than the official connector, this could lead to improper connections, depending on the connector counterpart.

Use a high temperature filament and keep the heating while soldering minimal to avoid melting. If it gets soft don't apply pressure on the pin and just net it cool down before soldering the next pin.

Tags