Wyniki wyszukiwania: 069

Lego Compatible (3069b.dat) Tile 1 x 2 with Groove

This model is compatible with the lego system.

UFS-069 Try Square & Corner 90 Degree Right Angle Clamp

This project had two inspirations. The “Serious Clamp It Square” by J-Max is amazing. https://www.thingiverse.com/thing:1306832 This thing is stiff, which is needed for clamping. It is large and feels strong when you hold it in your…

Lego Compatible (3069a.dat) Tile 1 x 2 without Groove

This model is compatible with the lego system.

Lego Compatible (20695.dat) Minifig Headdress Pumpkin Carved

This model is compatible with the lego system.

WP Fork Protection Ring 62,1mm for KTM / Husqvarna 48600698

A redesign of the OEM Part 48600698 adapted for 3d printing. I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase…

Lego Compatible (93069.dat) Minifig Beard Long with 3 Points

This model is compatible with the lego system.

Lego Compatible (20691.dat) Animal Dog Sitting Great Dane Head

This model is compatible with the lego system.

Lego Compatible (20690.dat) Animal Dog Sitting Great Dane Body

This model is compatible with the lego system.

Toilet Paper or hand towel Shelf Deluxe 42069

This has been what I needed for so long and I had yet to find one. Here it is, the final piece of the bathroom practicality puzzle. 3mf file made in PrusaSlicer with supports. Install with either double sided tape or 2 flathead screws for…

lego 3070 3069 63864 2431 6636 4162 14719 3068 26603 87079

lego 3070 3069 63864 2431 6636 4162 14719 3068 26603 87079

Remington Rodeo Chainsaw Starter Recoil Part 753-06974

This is an obscure and and odd part that perhaps no one will ever search for or print, but I designed it myself in OnShape because I couldn't find any aftermarket or even used parts online. Remington switched the the Outlaw model to…

Fridge handle mount for Whirlpool 488000506980

A quick and quircky plastic handle to replace a brocken mount of the Whirlpool 488000506980 fridge/freezer handle. According to this page , it must fit the following models: 859991054850 850466411702 869991054820 859991054830 859990962630…

Intimate Geometry - NSFW Hueforge 0069

Lego 10698 organizer

Stackable shelve for lego 10698 box. For one lego box you will need 10 pcs.

OSR2/SR6 Vesa Mount for Stanley 1-83-069

Extreme Adventure Set (42069-1)

This is the Extreme Adventure set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name,…

LEGO smooth flat studless plate 306926 3069

LEG0 Bricks flat studless plate 306926 3069 !! Mine printed in PET-G Smooth: ~0.5g ~15 min with support PEI Front: ~0.4g ~14min !without support! U can print smooth: And also print with PEI front (Textured/smooth/rainbow/cool/etc)

Earrings - 069 - Easy Print - Free

Design Concept The earrings showcase a unique star-like pattern with intricate line work, providing an elegant and delicate aesthetic that's both modern and stylish. Use These earrings are perfect for casual or formal occasions, adding a…

Lego Compatible (70694.dat) Arrow with Solid Shaft and Liquid Shaped Tip

This model is compatible with the lego system.

℗069 Bellsprout Articulated Lamp 3D print

Printable 3D model. Bellsprout desk lamp. Pokemon inspiration. STL files. -E27 Bulb Socket -Circular 20 mm light switch.

Torque Wrench and Impact Socket Set 069 I for screws or peg board

Tool holder for Torque Wrench and Impact Socket Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 110mm W - 55,89mm H -…

STANLEY 1-83-069 Vice TPU clamp support

This models can be printed in TPU and used with Stanley Vice to better keep fragile object. Available flat or with aligned 45 degree cut. Buy me a coffee if you want to support me!

℗069 Muk pedal bin Pokemon Printable 3D model

Printable 3D model. Muk Round pedal bin 16x16x25cm (6.3x6.3x9.84 inch.). Pokemon inspiration. STL files.

gm 9177069 Opel Vectra C molding

I made the model based on the dimensions of the surviving part from my car, with as much accuracy as I could

Gate Key Fob Holder for DoorKing MicroPLUS Fob DKS (8069-080)

Mount your gate key fob on your car dash like a standard button. Print standing upright without supports.

TP Shelf Deluxe 42069 V8 Twin Cam

This rework is : -Stronger as you can adjust the settings/orientations for each individual parts -Easier to print -no supports needed Printing with a higher amounts of perimeters as well as more top and bottom layers is going to help for…

Container lid cap Philips blender 300005069231

This is a replacement for the container lid cap for the Philips 300005069231 blender. The original one was pinching badly. That's why I created a replacement. I printed it from CPE. But you can use PLA or PETG without any problems.…

Lego 42069 Extreme adventure wall mount / holder

Simply print two of them and mount on wall

CBM D9069

Additional Parts needed 1x Bahar Enclosure 150*140*70mm project box 1x C-Control Pro Nr. 197220 SD card module 1x MeanWell RS-15-5 PSU 1x CBM D9069 PetSD+ variant board ( https://github.com/InsaneDruid/CBM-D9096/ ) 2x 5mm LED (one red,…

Dremel Bit Stylus "Magic Wand 42069"

I wanted to use Dremel bits without spinning them. Something thinner than a normal Dremel tool and easy to hold. For no reason at all, this sleek stick of sorcery has been dubbed Magic Wand 42069 . I've used it so far with a brass brush…

#069 Bellsprout – Low Poly Pokémon

Bellsprout’s slender, plant-like body takes on a simplified, charming form in this low-poly style. Its thin stem and leaf arms become clean, angular shapes that emphasize its delicate movement. The faceted surface of its bell-shaped head…

3069_Escuadra fuerte torre pc

Gran escuadra , ideal para torre de pc , tambien otros usos, diseño robusto aguanta peso. Si la pones en una madera puedes hacer el tornillo pasante y colocar tuerca y arandela en el otro lado. Print Settings Printer: Two trees Sapphire…

069 Vorsicht: Spielende Zahlen! hohle Wuerfel-Prismen

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Handle for Daikin BRP069B41 WiFi-Adapter/Halter für Daikin BRP069B41 WLAN-Modul

This is a handle for the Daikin BRP069B41 WiFi-Adapter (for my air-condition). There is no space to mount the WiFi-Adapter inside of the air-condition. Mounting with double-sided adhesive tape have not been considered for optical reasons…

Flexomaat(1SPF006906F0155)

Clipje om 2 automaten aan elkaar te koppelen om hier een kookgroep van te maken Mogelijk om op de Bambulab X1C 200 st in 1x te printen. Ongeveer 0.6 gram materiaal per clipje nodig.

#0069 Quick Tool Holster (with Magnetic Attach)

I find that constantly use 3 tools over and over again so I wanted to make them super easy to get and put away. My solution involves mounting them outside of my Lack enclosure with some VHB tape. This model prints without supports.…

Stanley 1-83-069 vise soft TPU jaws pads

These are soft TPU jaws for the Stanley 1-83-069 multi-angle bench vise: https://amzn.to/4g9iQ3L (affiliate link). Great to hold cylindircal objects. They slide over the jaws. You need to print both files as the angled slot needs to be…

AEG - 140183468069 - DPE 5960M

This is a two-piece replacement component for the lighting of a DPE 5960M hood. Specifically, it addresses the AEG - 140183468069 lighting. The plastic cover that clips onto the LED frame was broken. I designed it as a makeshift fix for a…

holder for YATO precision oiler YT-06977

A simple holder for YATO precision oiler YT-06977, to keep oil from dripping on a table. Intended to be lined with e.g. cardboard, which will soak in the drips. The oiler itself can be handy for 3D printer maintenance.

TY010691 Lint Roller

For more items, visit tomooyamaji.com ! Product Size Open: 44 x 34 x 154 mm Closed: 32 x 34 x 88 mm Notes for Assembly -The long/short pins for pivot holes: Please see the attached image. -Please apply a duct tape etc. on the roller. How…

ETA Profito 1069 90000 + Delongi

ETA Profito 1069 90000 + Delongi It holds the lever in ETA grinder.

Kawasaki H1 H2 Petcock Diaphragm Plate Spacer 500 750 Suzuki T500 T305 51069-001

About My old Kawasaki H1 500 projects are in various states of disrepair and some parts are either too expensive or impossible to find. Figured this would be easy to model and be around for anyone who needs the same thing I do. It looks…

VASE BIO 069

Parametric 5.4cm tall object with rounded circular geometry and a bio pattern. Engineered for precise 3D printing.

VASE CHEVRON 069

Parametric 7.4cm tall object with octagonal 8-sided geometry and a chevron pattern. Engineered for precise 3D printing.

Lego Compatible (70694.dat) Arrow with Solid Shaft and Liquid Shaped Tip

This model is compatible with the lego system.

Kawasaki H1 H2 Petcock Diaphragm Plate Spacer 500 750 Suzuki T500 T305 51069-001

About My old Kawasaki H1 500 projects are in various states of disrepair and some parts are either too expensive or impossible to find. Figured this would be easy to model and be around for anyone who needs the same thing I do. It looks…

Extreme Adventure Set (42069-1)

This is the Extreme Adventure set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name,…