Wyniki wyszukiwania: 20000

Sortowanie

48 modeli

P
PrintablesPointNemo

20000 mAh Powerbank

ATTENTION: Strictly avoid short circuit and wrong polarity !!! Part list: DIY powerbank modul 2.4A (e.g. from ebay) 4 Samsung INR21700-50E (21700, 5000 mAh) 4 hex screws M3 x 6 4 insert nuts M3 x D4 x L5 1 m flexible cable 0,75 - 1 mm² 2…

Pobrania
430
Polubienia
90
Ocena
5
P
PrintablesAleksR2D2

Powerbank 20000 mAh (21700)

Part list: powerbank modul IP5310 (LX-LBC 3.1) 3.1A 4 Samsung INR21700-50E (4x5000 mAh) 4 screws M2x12 silicone cable AWG18 silicone glue Advice: Fix the module board with glue Fix the battery with glue to the body of the powerbank…

Pobrania
180
Polubienia
36
Ocena
0
P
PrintablesStriK3FoRC3

Pico 4 Power Bank Addon (INIU 10000mAh, Pilot X7 20000mAh)

as always i included the STEP and f3d files so you can customize the back with your own logo. this is a battery/power bank add-on for your Pico 4 Head Strap. This add-on is compatible with the INIU Power Bank, 22.5W Fast Charging…

Pobrania
154
Polubienia
12
Ocena
0
P
PrintablesAleksR2D2

Powerbank 20000 mAh - 21700. Power 22,5w

Part list: powerbank modul SW6208 (power rating of 22.5W) 4 INR21700 (4x5000 mAh) 2 screws M2x10 (for housing) 3 screws M2x5 silicone cable AWG18 silicone glue Advice: Fix the module board screws M2x5 Fix the housing with screws M2x10 Fix…

Pobrania
137
Polubienia
19
Ocena
5
P
PrintablesTheIronM

Gridfinity Anker Powerbank PowerCore 20000

A 4x1 gridfinity organizer for the Anker Powerbank PowerCore 20000. 15% infill 0,2mm

Pobrania
104
Polubienia
7
Ocena
3
P
PrintablesDejv

Baseus 20000mAh powerbank cable clip

Cable clip for 22.5w 20000mAh baseus powerbank

Pobrania
94
Polubienia
20
Ocena
0
P
PrintablesJ W

Uconsole 20000Mah backplate

*UPDATE - 18-02-26 V2 models added, depth increased to ensure clearance of adaptor board components *UPDATE - 23-05-26 please be aware support bar at the back wont fully close due to the larger battery area Back plate battery area…

Pobrania
70
Polubienia
8
Ocena
5
P
PrintablesFlotschi

Anker Powercore Essential 20000 Wallmount

Just a Anker powerbank holder. The inner dimentions are 7,5x2,2cm and 7cm deep. There are two mounting holes on the back. Or stick it on the wall with double sidet tape. I printed this one for the Anker Powercore Essential 20000 but maybe…

Pobrania
65
Polubienia
9
Ocena
0
P
PrintablesSir Print-A-Lot

Ikea Skadis holder for Xiaomi Mi Power Bank 2C 20000mAh

This simple holder for the Xiaomi Mi Power Bank 2C 20000mAh can be mounted on the well known IKEA SKADIS pegboard. Model created with the help of https://www.printables.com/pl/model/194183-skadis-universal-hook-adaptor-blank and universal…

Pobrania
57
Polubienia
5
Ocena
0
P
PrintablesLouis Herber

Steam Deck Holder for Baseus Elf 20000mAh 65W (PPJL65C)

A remix from the original to fit the Baseus 20k 65w ‘Elf’, PPJL65C, so the powerbank with attached cable. This is considered a good option for the Steam Deck! The fit is good, does not fall of, like the original poster. I like it very…

Pobrania
57
Polubienia
8
Ocena
4
P
PrintablesMetalbird

Anker PowerCore Speed 20000 PD Tripod Leg Clamp - for Manfrotto 055 Tripod

Clamp to hold an Anker PowerCore Speed 20000 PD on a Manfrotto 055 tripod leg. It should also fit any other tripod with a leg diameter of 30 mm. This might also fit other Anker PowerCore products with similar measurements. For reference,…

Pobrania
52
Polubienia
10
Ocena
0
P
PrintablesJulianKoe

UGREEN Nexode 20000mh 3D Scan

3D Scan of UGREEN Nexode Power Bank

Pobrania
42
Polubienia
5
Ocena
0
P
PrintablesTxGnRnr

Aukey 20000mah Battery Holder for LabRadar

I needed a way to attach my 20000mah Aukey powerbank to the LabRadar. The LabRadar is notorious for chewing through AA batteries. This print fits the thinnest power bank I could find. Unfortunately, it is no longer available for sale on…

Pobrania
42
Polubienia
0
Ocena
0
P
Printablesstepan.rudenko

Baseus 20000mAh Powerbank holder

Originally designed to carry battery as power source for FPV goggles or any other tool used in a field. There was a cable holder added for the time you don't use it. Clip 1 is used as a hook on a belt. Clip 2 may be used on any edge. Pin…

Pobrania
42
Polubienia
11
Ocena
0
P
PrintablesEdu_liz

Stand for the VEGER 20000mAh / Soporte para la powerbank VEGER de 20000mAh

Stand for the VEGER 20000mAh power bank, with dimensions of 41 x 148 x 102 mm and weighing 302 grams. I bought it on Amazon: https://www.amazon.es/gp/product/B09J145MSX/ and I made this case for it to always keep it in the same place.…

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesZdenko

Xiaomi Mi 2C 20000mAh Powerbank holder

This is a simple holder for the Xiaomi Mi 2C 20000mAh Powerbank. Printed on its bottom with supports for the pegs. Powerbank dimensions - 141.9 x 73 x 21.8 mm

Pobrania
39
Polubienia
7
Ocena
0
P
Printableskrml

Anker PowerCore Essential 20000 USB powerbank (Model A1268) Holder for Ikea Skadis

This items will hold the Anker PowerCore Essential 20000 (Model A1268). I have other models for different USB power banks in the works as well. You will need two M2.5 Skadis T-Nuts by @6d6178 and two M2.5 DIN912 screws for mounting the…

Pobrania
28
Polubienia
6
Ocena
0
P
PrintablesGeorgeE

Battery hooks for Goji 20000 mAh battery bank

Came up with these for making my battery bank easier to use with the Quest 2. One advantage is that it is a nearly perfect counterweight for the headset, battery weight is 493g while Quest 2 is 503g. The main advantage is being able to…

Pobrania
26
Polubienia
5
Ocena
0
P
Printablesalex.so.3

Remixed Battery Mount for Oculus Quest 2 with GOMRVR Halo Strap for Redmi 20000 mAh Powerbank

Remixed Remixed Battery Mount for Oculus Quest 2 with GOMRVR Halo Strap for Redmi 20000 mAh Powerbank Category: Gadgets

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesJorg

Oculus Quest Battery Clip for XT Power 20000

This is a battery holder for the Oculus Quest that fits the XT Power 20000 pack. The battery opening is 84 x 22 with an 11mm radius on the ends. It holds the pack securely and is comfortable and stable. V8 has pointed arches and that…

Pobrania
25
Polubienia
7
Ocena
0
P
PrintablesDarthRUSerious

Gridfinity Power bank holder (20000mAh x 2)

This is a item holder set for (2) Elecjet PowerPie P20k power banks or other similar sized devices. There are a lot of other models that hold power banks similar to this (Anker Powercore 20k, etc), but won't fit a slightly thicker device…

Pobrania
24
Polubienia
3
Ocena
5
P
PrintablesRatMan

Baseus Powerbank (20000mAh), TPU corner cover

Hi. I've designed a corner cover for Baseus powerbank. Bottom and top of the case are opened for better heat distribution and access to ports. Sides fully closed. There is also an opening for a function button. THIS DESIGN COVERS CORNERS…

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesStriK3FoRC3

Quest 2 Battery Strap for Pilot X7 20000mAh Power Bank

STEP Files included. so you can add your logo on the back This is the Original Headstrap where i added the battery back addon on it: https://www.thingiverse.com/thing:4624883 This is a battery/Power Bank add-on for your quest 2 original…

Pobrania
21
Polubienia
2
Ocena
0
P
Printableshrrossi

Seal for 20000 mAh Powerbank

Instead of the suggested foam I made two TPU gaskets (0.4mm and 1mm) as dust protection.

Pobrania
19
Polubienia
0
Ocena
0
P
Printableskilinccagatay

Xiaomi 20000mAh Power Bank USB-C Conversion Hack

Xiaomi 20,000mAh Power Bank USB-C Conversion Hack After purchasing the iPhone 15 series, I was in need of a USB-C power bank. I considered using converters, but they often felt fragile and prone to breaking. For this hack, you'll need…

Pobrania
19
Polubienia
2
Ocena
0
P

XO PB97 20000mAh 65W Rubber Shield

Better to print with flexible materials (TPU, Flex).

Pobrania
18
Polubienia
0
Ocena
0
P

EQ5 Tripod Leg Holder for Anker PowerCore Essential 20000 Battery Pack

A battery holder for the Anker PowerCore Essential 20000 battery pack that attaches to the leg of an EQ5 tripod. I designed an appropriate holder (in OnShape) for the size of the Anker PowerCore Essential 20000 pack and mashed it onto a…

Pobrania
17
Polubienia
0
Ocena
0
P
Printablesdoragasu

Bumper for Qilive 20000 mAh Power Bank

A two piece bumper for this power bank. Must be printed in soft material, like TPU. FreeCAD design files are included.

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesDT_NL

Gridfinity Bin (1x4) for Realpower PB-20000 PD+ powerbank

Gridfinity Bin (1x4) made to hold one Realpower PB-20000 PD+ powerbank. The sideways position allows it to be charged while being stored. Printed on Bambu Lab P1S using Bambu Lab PLA Matte Charcoal, with 0,16 mm layer height and 15%…

Pobrania
15
Polubienia
3
Ocena
0
P
Printablesikruglov

Gridfinity Wiha Z62000006 crimping tool holder

I print without every other leg to save on filament. It prints without support. step file has all the legs.

Pobrania
12
Polubienia
4
Ocena
0
P
Printableszuze1

Cuktech 15 20000mAh

Für unterwegs eine Schutzhülle. Druckbar ohne Stützstruktur. Wer den TPU-Schutz nicht möchte, kann die Modelle skalieren.

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesJohn 14:6

21700 powerbank- 20000 mah dual output/input

21700 power bank for charging phones, electronics, and for powering USB devices. The USB-A ports are 2 amp output apiece and the USB-C ports are 2 amp inputs and if you plug them both in you can charge the power bank twice as fast when it…

Pobrania
11
Polubienia
9
Ocena
0
P
PrintablesLeigh Williams

Red-E Supervolt 20000mah base

Base for the Red-E Supervolt 20000mah power bank. It has built in strain relief. The powerbank dimensions are 48.5mm X 48.5mm.

Pobrania
8
Polubienia
0
Ocena
0

Soporte para powerbank xiaomi 20000mah con correa Elite para Oculus Quest 2

Ahora puedes agregarle un buen powerbank a tu oculus

Pobrania
6
Polubienia
0
Ocena
0

MakeFuture Power Bank 20000 mAh (MPB-203BK) stand

MakeFuture Power Bank 20000 mAh (MPB-203BK) stand. Made it for convenient use small usb led lamps.

Pobrania
5
Polubienia
1
Ocena
0
P

Mini Jet Nozzle for Biltema Foam Sprayer art. 2000043096 (no support)

Mini jet nozzle insert for Biltema foam sprayer, art. 2000043096. This 3D printed part fits in the quick connector in front of the foam liquid bottle. It is made to give a narrower and more concentrated water/foam jet than the original…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesMatthew Pitta

Baseus 65w 20000mAh Gridfinity Holder

in the middle of my toolbox re-org and wanted storage trays for my Baseus 65w 20000mAh battery banks to go in my gridfinty trays. 1x4 on the grid, loose fit so you shouldnt have any issue putting it in the holder and extracting. print in…

Pobrania
3
Polubienia
0
Ocena
0
P
Printablesron4pin

UGREEN_Nexode_20000mAh_165W_Case+KillSwitch Mount

I added a negative on to the case so that the killswitch adapter can be glued into it and I can then have a portable battery pack for my steam deck. I printed in PETG. Glue and clamp pieces together with superglue and leave enough time…

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesJmay504

loST MARY MO200000 PRO vape case v.1.2

this is a second version of the origional model. its tighter and slides off less

Pobrania
1
Polubienia
1
Ocena
0
P
PrintablesJmay504

Lost Mary MO20000 PRO case

vape case for the lostmary MO20000 PRO. has hole for lanyard or keychain. printed in regular pla and added fuzzy skin to it for some grip. its fairly thin so the profile is just fine and if its too loose then leave one of the stickers on…

Pobrania
0
Polubienia
1
Ocena
0

SWISSTEN 20000 mAh Power Bank Enclosure

A compact enclosure for the SWISSTEN 20000 mAh power bank, model 22013945 (102 × 71 × 29 mm). Features a solid front, a hinged left side secured with an M4 thumb screw, and ventilation slots on the right side and bottom. The open top…

Pobrania
0
Polubienia
0
Ocena
0
P
Printablestrickl3

Gridfinity Anker PowerCore Essential 20000 (A1268)

Gridfinity holder for Anker PowerCore Essential 20000 (A1268)

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Baseus Powerbank (20000mAh), TPU corner cover

Hi. I've designed a corner cover for Baseus powerbank. Bottom and top of the case are opened for better heat distribution and access to ports. Sides fully closed. There is also an opening for a function button. THIS DESIGN COVERS CORNERS…

P
Printables

Gridfinity Power bank holder (20000mAh x 2)

This is a item holder set for (2) Elecjet PowerPie P20k power banks or other similar sized devices. There are a lot of other models that hold power banks similar to this (Anker Powercore 20k, etc), but won't fit a slightly thicker device…

P
Printables

Uconsole 20000Mah backplate

*UPDATE - 18-02-26 V2 models added, depth increased to ensure clearance of adaptor board components *UPDATE - 23-05-26 please be aware support bar at the back wont fully close due to the larger battery area Back plate battery area…

P
Printables

21700 powerbank- 20000 mah dual output/input

21700 power bank for charging phones, electronics, and for powering USB devices. The USB-A ports are 2 amp output apiece and the USB-C ports are 2 amp inputs and if you plug them both in you can charge the power bank twice as fast when it…

P
Printables

Uconsole 20000Mah backplate

*UPDATE - 18-02-26 V2 models added, depth increased to ensure clearance of adaptor board components *UPDATE - 23-05-26 please be aware support bar at the back wont fully close due to the larger battery area Back plate battery area…

P
Printables

Meta Quest 3 - DAS Powerbank Mount for Anker Powercore Sense III (20000mah)

Slid it right down the topside of DAS. Battery slides right in. Printed with PLA, 0.4mm nozzle. Print upright with bedsupports. Made for Anker Powercore Sense III 20.000mah powerbank, and Vive Deluxe Audio Strap