1 / 2
Mini Jet Nozzle for Biltema Foam Sprayer art. 2000043096 (no support)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini jet nozzle insert for Biltema foam sprayer art. 2000043096
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Mini jet nozzle insert for Biltema foam sprayer, art. 2000043096.
This 3D printed part fits in the quick connector in front of the foam liquid bottle. It is made to give a narrower and more concentrated water/foam jet than the original opening.
This is not an original Biltema spare part. Test fit carefully before use and start with low pressure to make sure the part sits securely.
Recommended print:
- Material: PETG or stronger
- Nozzle: 0.4 mm or 0.6 mm
- Walls: 3 or more
- Infill: 10–25%
- Print with good layer bonding
