1 / 2
Mini Jet Nozzle for Biltema Foam Sprayer art. 2000043096 (no support)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini jet nozzle insert for Biltema foam sprayer art. 2000043096
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Mini jet nozzle insert for Biltema foam sprayer, art. 2000043096.
This 3D printed part fits in the quick connector in front of the foam liquid bottle. It is made to give a narrower and more concentrated water/foam jet than the original opening.
This is not an original Biltema spare part. Test fit carefully before use and start with low pressure to make sure the part sits securely.
Recommended print:
- Material: PETG or stronger
- Nozzle: 0.4 mm or 0.6 mm
- Walls: 3 or more
- Infill: 10–25%
- Print with good layer bonding
