340 modeli
The luxurious Penguin Galaxy edition of Frank Herbert’s original Dune features a beautiful cover by the designer Alex Trochut. This bookmark is a miniaturised homage to the back cover logotype with the letters D-U-N-E stylised in a…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
This model was inspired by my mother who asked me to design her a toothbrush holder. I ended up using it for myself instead. Parts For assembly you will need: printed parts 4 x rubber feet of your choice with a max diameter of 9mm For…
Wydruk około 8,06 €–9,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Case for Iphone SE 2016 with honeycomb.
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I don't like the screw-in version of my Triumph, so I made a stick-in one. And in white it's much better to see the oil on it. The length of the original depends a bit because of the o-ring, but I'm sure the printed one is well within…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you would like to buy a set of these laser cut from acrylic feel free to contact me via [email protected] I've modeled the track outlines for every circuit Formula 1 will go to for the 2026 season Edit 1/9/2018 I fixed the scale for…
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
A 2x1 Gridfinity module to store multiple coin cell batteries (2016, 2025 and 2032)
This model is compatible with the lego system.
My car has a very small space under the oil cap opening. Regular funnels did not seat straight without holding. The lower diameter of the funnel is 30mm which fits perfectly. The walls are 1.2mm which allows for both 0.4 and 0.6 nozzles.…
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
This is probably the most super selective circumstance design i have ever made, but like most things - it took a little work to solve a problem so I figure if anyone else has the exact same problem, this will help. My mechanism inside my…
There is not a way to disable the passenger seatbelt alarm. Pluging this in lets you “turn off” the alarm. This should not be used if a person is in the seat. I've included a few variations of the buckle. Beveled Pyramids Grids Spiky
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.
Simple but sturdy storage for 10 CR2016 coin cell batteries. This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 20mm cell_thickness = 1.6mm See the original model under “This…
A/C Vent Louvre Tab - Toyota Corolla 2016 Print with tabs facing up with tree supports if possible
Rear Bumper Tow Towing Hook Cover Eye Caps Fit for Mazda 3 2014-2016 Text version can be modified so that you can add some text to your bumper Category: Automotive
*Used FedFilamen TPU (flexible filament). *Print fully supported. *Case wall thickness - 2mm
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Wall mount for Samsung Galaxy Tab A (2016) 10.1 This model forced me to learn how to use Fusion 360.
Don't want your coin cells to flip around in their slot when adding or removing batteries? Want an even easier way to efficiently use this functional and space saving design? can hold these coin cells/batteries (2 slots for each group):…
Honda jazz/fit bonnet stay clip - 2016 model Grey version is abs after 5 years use. Printed in abs/petg
Total redraw of the 2 phone holder I found on Thingiverse but don't fitperfect on my Skoda Octavia 3 Scout. The shape, the slots for the phone and for the parking card or credit card are redraw I have added a slot for caddie coin and an…
The second iteration of the my initial phone mount. Improvements are optimized stiffness/flexibility with the dashboard mount for PETG and PLA. Reduced ball joint stem length to increase rigidity and minimize bouncing. Increased stem root…
How it started: How it went: How it ended:
This is a professionally modeled 3D printable version of the Chevrolet Camaro 2016 . The model is designed with clean geometry, smooth curves, and accurate body proportions to capture the aggressive and iconic look of the 2016 Camaro. All…
Link to Mark 2 version. 2016 Ford Ranger ball joint phone mount (Mark 2) by Alexander Brown | Download free STL model | Printables.com This phone mount, mounts to the 2016 Ford Rangers dash without the need for glue, screws or to…
I use two mini flashlights while backpacking that take CR2016 and CR2032 batteries. I've always wanted an elegant solution to keep them organized and away from potential shorts. I designed it to hold a CR2032 and two CR2016s, but you can…
Print with ABS, ASA, or PETG Cup needs support at the hinge. Lid does not require support if printed with the top on the bed. Nozzle 0.4 Layer thickness 0.2 Infill 20%
I've created this cupholder because in my 2017 Audi S5 the RedBull cans and other stuff wasn't fix in the standard one. Also I've added a storage for my IQOS Iluma One and space for 2 cigarettes which fit in and are prepared, so you don't…
Originally posted on Thingiverse here: https://www.thingiverse.com/thing:3768523 This case is for the phone Samsung Galaxy J7 2016 version, that is j710 models; do not confuse with the J7 Prime, g610 models. Some of the models are…
I created this mount for my 2013 F-350. It is designed with a recess for 4 BC63 (3/4" x 3/8" x 3/16" thick) neodymium magnets. I epoxied (I used JBWeld) them into place and attached a piece of sticky backed rubber over them to provide a…
This allows for a larger cup / bottle to be used. This is designed to fit a 2016 Mercedes C-class but may fit other models. Allows a bottle / cup of uptown 96mm in diameter. The base fits into a original cup holder with a minimum size of…
Description Replacement grille letters designed for most 2016–2023 Toyota Tacoma TRD Pro–style grilles. These letters were modeled as a functional replacement for the OEM grille lettering. To make them easier to print, I left out the…
Gridfinity box to store CR2016 batteries. Gridfinity U-standards: 1 x 1 x 3 U (42 x 42 x 21 mm)
It's for a 2016 Jeep Wrangler, not sure if it fits other models. Best results I've gotten so far is to print standing up on the edge without the little hole. I printed in PLA with 20% infill. First go-round the PLA was warped by the heat…
An attachment angle for my car broke so I created a replacement in CAD. For the unlikely case that anyone is searching for a replacement of this part, I put it here. It's the part that connects the center console panel to the tunnel…
This is designed to cover the holes left once you have removed the seats from a 2016 Ford Transit with the stock short carpeting. It will likely work with many different years but I have only tried it on my own 2016 and they worked very…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This Mac Mini Cooling Stand is compatible with 120mm fans. The Mac Mini's bottom plate needs to be taken off. Gravity is used to mount the Mac mini. I used a 120mm fan with temperature sensor (Artic F12 TC) and a StepUp Module (MT3608…
A better version of this coin holder is supplied with the PLATINUM model of the car. I removed the deep pocket since it impared the printing too much for my needs. I think it would fit other vehicules as well, the original part number is…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200mm sp. 3mm
Amateur model. Not dimensionally accurate, just for display.
Chevrolet Camaro SS 2016 wide body key chain, .8 layer height, fenders have been extended to give it a widebody look.
The mirror covers break often on the 2016 Mazda Miata. I've had 2 break in the first 3 years of ownership. Mazda does not sell the mirror cover, only the entire sun visor. This design replaces just the mirror cover and works functionally…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Cup holder adapter to fit large bottles up to 91.5mm in diameter. The smaller necked portion will fit bottles up to 68mm in diameter. It was designed to fit a 2016 RAV4 but will likely fit other vehicles including 2015-2018 RAV4s. There…
Christmas tree with a twist. If you have a LED Tea light it can be used with or with out tree for different occasions. Tea light used is 36 mm dia x 44 mm high Now there`s an Angel to go on top ( will need to be glued on ) Category: Art
I designed this phone holder base to go between the 2 middle dash air vents of the Audi A3 (2016-2020 models). It sits flash on the dashboard for extra stability hence it is advised to sand very well the back or use some soft foil on the…
Replacement cupholder divider for Hyundai I40 (2016) with parking pass slot unsure if this will work with other Hyndai I series cars Designed to have a snug fit, recommending printing in PETG or ASA/ABS to avoid deformation
HK Trash Bin 2016 version in 1:12 scale. 1:12 model, good to play with S.H.Figure and others 1:12 scale toys. 香港垃圾筒 2016 年版本，1:12 比例。 兩個版本，一個上身有米缶，一個上身無米缶。 1:12 可以同 S.H.Figure、胡廸等公仔一齊玩～ — I’m a HONG KONG MAKER, Thanks, Enjoy! Follow me on…
Bottom is flat. Case is tested. Best printed slowly in TPU.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Fiat 500 shifter cable bushing. There is a recall for those, but it's helpful to have a quick replacement in case of temporary situation.
This should work for bikes with the 8.5" or 216mm spacing between windshield mounting brackets and 40mm hole spacing for the M6 bolts. Remove the old brackets completely. Print solid with all perimeters. Suggested settings for 0.4mm…
Dead-simple battery tester for CR20?? coin-button batteries. Provides a light load to test the battery. Bright led = good. The little prongs sticking in the front can be used with crocodile clamps attached to a voltmeter in order to test…
Thanks for the original design! Had to tweak it a little for my purpose. Made this remix to level the dual extruder on my 2016 FFCP. Steps to use: 1: Remove all filament and allow nozzles to cool 2: Remove parts cooling fan and duct 3:…
Monster from Doom 2016. Modular kit.
I wanted something for my CR batteries, to fit onto a 2x2 grid. For the Bin base, I used the Fusion360 Gridfinity extension: https://apps.autodesk.com/FUSION/en/Detail/HelpDoc?appId=7197558650811789&appLang=en&os=Win64. Supported CR Cell…
U can use X1 tablet Keyboard as USB KBD. Please prepare following materials. -Strong small Magnet*2 -Any USB cable. -Al foil or any conductor. Category: Tablet
Adjusted version of jufy111's cup holder insert for smaller cups, modified for 2019-2025 Honda Passports (and I think 2016-2022 Pilots and 2017-2025 Ridgelines).
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Made to fill the open hole with cup holders.
Got rid of the wording at the bottom of the retraction test and made the base of the test flat When you print a lot of these, I feel it adds unnecessary printing time Category: 3D Printing Tests
!!! DO NOT EVER, EVER, EVER! PRINT CAR PARTS WITH PLA !!! PLA WILL reach glassing temperatures on hot sunny days, no matter WHERE in the car the part goes. PETG, ABS, or other similar higher-temp filament is REQUIRED With that safety…
fits the REAR door of the 2016 cx5 and maybe some other spots in other cars that use the three hole mount, I'm not sure.
The Modern Muscle, Cast in Aggression. This is not a car. This is the reincarnation of American defiance, cast in sculpted steel. The Chevrolet Camaro SS immortalizes the visceral, unapologetic roar of a modern-day warrior. Every chiseled…
Modeled in Fusion. Designed to be printed face down. Only difference between left and right files is the text, you can just print two of the same side and it will work so long as you don't mind the text being upside down on one. I didn't…
If you are looking for a safe storage solution for your NeoSaveMasta memory card for your Neo Geo, look no further! The NeoSaveKeepa was specifically designed to securely hold the NSM in place. The NeoSaveKeepa is ONLY compatible with…
This is sim-racing steering wheel center panel replica used in following cars: 2016 Ford Focus RS RX (Ken Block) 2018 Ford Focus RS RX (Steve Arpin) 2014 Bentley Continental GT3 After printing, wrap panel with carbon vinyl foil, cut all…
The version for the 87W USB-C power adapter can be found here The power adapter of my new MacBook Pro was scratched very quickly after buying it, and i don't like scratched stuff... So i designed a cover for it, and my second power…
I wanted to change the push-open tray in the center console to something useful and give it a fun design. this is my first design in CAD. I'm sure it's not perfect and far from, but it's a cool design I think. This design may fit in the…
An adapted model to fit the 70 02 160 plier. Printed in 0.3mm with PETG.
SEAT Leon 5F FR Logos — Pre-Facelift (2012–2016) Custom 3D-printed FR badges designed specifically for the SEAT Leon 5F pre-facelift (2012–2016) . You will find two different model options depending on your printer setup: 🟥 For…
Chevrolet Camaro SS 2016 widebody, fenders have been extended to give it a widebody look.
Coincell Battery holder, fits 30 in total CR2032, CR2025, CR2016 etc... (any CR20XX, with a thickness less than 32mm) Naming on the Bottom is only for visual identification, all 30 slots are the same
This bracket will screw in using one of the bolts on the side of the machine. The feet will rest inside of the handle. I've had it installed with heavy use for a few months and its been solid. Print Settings Printer Brand: FlashForge…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
Was tired of my soda cans or any cans of that nature flopping around in the one size fits all insert that ford has inside their inserts for the center console. Couldn't find anything remotely close or anything for my truck so I decided to…
Monster from Doom 2016. Modular kit.
Found this awesome model on Thingiverse and modified it for strength. Fits large phones up to iPhone 15 Pro Max. Aftermarket magsafe chargers should work as well as genuine Apple Print in ABS at 0.16 layer height. 3 walls. No supports…
Spring Preload Adjustment Knob for Suzuki v-Strom 650 (2016), For slicing added more top and bottom layers as well as vertical shells for added rigidity, printed in PETG, with supports, letters up, to increase front surface appearing.…
@dhiltonp built an incredible model, but in the world of gridfinity some of us like the holes and some do not - alas I “like a flat bottom” if you will. Remixed that lovely model to remove the cut out holes.
A model of a Samsung Galaxy Tab A 2016. I used it for a wall mount.
Single side of the 2016 Rio Olympics Medal - with added loop for lanyard. Category: Coins & Badges
I made a mobile phone holder for the CD slot for the original KIA radio, the holder is equipped with a 17mm ball to install any holder that supports this system. the back of the holder itself should be covered with self-adhesive…
Update June 2025: 100 degrees Fahrenheit today, and the spring snap of the current version is no longer providing retention with the clip when printed in PETG. Update July 2025: ABS printed clip is holding up to 100 degree temp so far.…
Fits a classic 32oz Nalgene water bottle in the center console of a 2015/2016 Honda CRV, using the smaller rectangular section of the console to not block the main cup holders when not in use. Print in the provided orientation with…
CELL - John Cusack and Samuel Jackson - 2016 3D printable model. Super easy to print, size the figures and the base to your needs and go!
Sci Fi Movies - Arrival - 2016 3D printable model.
This is a case to put a 2016 Ford Edge Key fob into. This may work with other fobs, but I haven't tried. The build quality of fords keys are not very great, which led to the back case and key ring hole to break off, so I made this to put…
A buddy of mine just bought a Titan and the cupholders aren't large enough for his Stanley and his wife's Yeti water bottles. So I 3d scanned it and then used that as the template to make this. With a little measuring we made both the…
I really disliked the cup holders in my 2016 Outback as my coffee cup always clanked around during my commutes so the first thing I did when I got a 3D printer was come up with and insert for the cup holder. I designed this around my…
Stützen auf dem Druckbett aktivieren!
Replacement part for the parcelshelf of a Ford Ka (2009 - 2016). Best printed in PETG with minimal supports for best result.
2016 VW Jetta cupholder insert
![[gridfinity] Coin Cell Battery Box: EASY REMOVAL/ADDING with finger or wedge (CR2032/CR2016, 357/303/SR44, A23/MN21/AAA)](https://media.printables.com/media/prints/734837/images/5755001_03a129d4-d179-43cf-959a-eef3b9b9bc27_df25febc-8afd-4e3f-82dc-74820d28b85c/coin-battery-box-000-overview.jpg)
