14 inch laptop stand @ 30degrees
laptop stand at 30 degrees for 14inch laptops
- Pobrania
- 75
- Polubienia
- 4
- Ocena
- 5
Liczymy pasujące modele…
laptop stand at 30 degrees for 14inch laptops
This is a PETG temp tower completed with post processing added on Cura already. Its 260-230deg. Load and print. In case it doesn't transfer over Post Processing settings are… ADD 7, ChangeAtZ SCRIPTS. LAYER NUMBERS: 1, 43, 84, 126, 168,…
In watercolor painting, positioning the paper at an angle offers several benefits, particularly when creating washes or managing the 'bead' of paint. This technique is crucial for achieving smooth, even layers of color and for controlling…
This was inspired by Eondar's mount but modified to be used with a much cheaper camera module. The module only costs ~$5 Camera (130 Degrees)…
Ant Lite Canopy
Most lawnmowers, and a lot of other garden equipment, work best when the blades are sharpened to a 30-degree angle. With this gauge, you no longer have to estimate--just grind or file the blade's edge until tip just reaches the center of…
Inspired by YannickFPV's great designs for the other DJI cams. Protect your Osmo Nano while smashing your quad into walls! No TPU in view in ultrawide! Supports generic ND filters, like TBS and CameraButter. Print vertically with…
Remix of the very good model by @pdxlocs for a common 6W soshine panel. It has been changed from 45 to 30deg and holes have only been maintained on the panel side – I prefer glue up or other bonding on the bracketry side to minimize water…
Most mounts for the Hero11 Mini on the Siren F5 are 25 degrees, so I borrowed a couple files and smooshed them together to make this "masterpiece". Flight (and crash) tested, leaves plenty of space for the battery, balances well, and is…
The phone can be used both the driver as well the co-driver as the holder pivots -30,0,+30 degrees positions. Avoid need of the support the L&R brackets are printed separately and super glued. If you need change the length of the brackets…
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Just a quick 'hack' in tinkercad, to create a bit more clearance on the original model
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Untested Fatbike Fender Mold Element first draft 30 degree segment... Elements are to be bolted together with M5 screws min 35mm long. Category: DIY
This is the snap version for the printer test model from here, https://www.printables.com/model/271350-mini-all-in-one-printer-test by Ty10y . The upper shelf on the second pic is the snap version as I also made a push fit version. Make…
Front bumper for kayouloin frame by kayouframe. I add a lock angle for the fpv cam and simplify the mount of the elrs 900MHz antenna
GoPro session 5 mount at 30degree tilt for hglrc sector 5 frame the mount will fit a tbs nd filter Print Settings Rafts: Doesn't Matter Supports: Yes Filament: eSun tpu Category: R/C Vehicles
This is the push fit version for the printer test model from here, https://www.printables.com/model/271350-mini-all-in-one-printer-test by Ty10y . The lower shelf on the second pic is the push fit version as I also made a snap version.…
This mount snugly holds a Session 4 or 5 at 30 degrees at a T-Motor FT5 frame.
This is a remix from MouseFPV's Session 5 mount. The original was good but my ND Filter kept falling off. This will hold the filter on the top and bottom without interfering with the image. - This may not be the case with a GoPro Session…
30deg angled adapter for airfilter
nozzle with an outer diameter of 35 mm and an inner diameter of 31 mm
Designed to screw to a wall below kitchen cabinets. Print with the smaller rectangular face on the bed, and without supports. Add a pause so you can drop in two M3.5 nuts during the print. 3 to 5 walls and 20 cubic infill.
Curved train track piece. Female to male connectors. 30 degrees, R100mm. Fits standard wooden train track sets.
the photo is not the updated version with the tpu around the lens the print file is updated.
A unifi g3 camera mount, designed to give a 30 degree angle so when ceiling mounted provides an angled view capturing more of below. Does not require unifi mounting bracket or hardware. Designed to use a single 5mm screw to mount.…
30 degree curved female-to-female track. Radius 100mm. Fits standard wooden train track sets.
A spool holder that mounts to the wall at 30 degrees. This is designed to mate to the recess in my metal garage frame, but could be readily remixed to work for a flat wall. This differs from many other spool holders in that it is designed…
Curved track piece with double male connectors. 30 degrees, R100mm. Fits standard wooden track sets.
Remix of the shovels handle to print at an 30deg angle.
Model based on https://www.printables.com/model/115846-ramjetx-thrustmaster-t300-t500-tx-tspc-70mm-hub-ad . I designed the base from scratch to make it compatible with my Nardi wheel. The diameter of the hub was increased from 70mm to…
Designed to screw to a wall below kitchen cabinets. Print with the smaller rectangular face on the bed, and without supports. Add a pause so you can drop in two M3.5 nuts during the print. 3 to 5 walls and 20 cubic infill.
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
A unifi g3 camera mount, designed to give a 30 degree angle so when ceiling mounted provides an angled view capturing more of below. Does not require unifi mounting bracket or hardware. Designed to use a single 5mm screw to mount.…