711 modeli
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
If you like my models or would like a specific model made please consider donating. 1:200 Desk Model of the Airbus 320-200 CEO. The .3MF file contains the parts for the print.
Wydruk około 5,32 €–6,50 € nettoWstępna wycena jednego wariantu
A dust cover for an IEC320 C14 Receptacle. Even though the friction fit is good, a cutout has been added to keep the cover attached, using a string or similar, when not in use. Print instructions Material: PLA Supports: No Layer Height:…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
The housing was designed for a 2.8" LCD display. In the device under construction, simply cut a 52 × 90 mm opening and attach the housing using double-sided tape or plastic adhesive. The inserts used are M2.5 × 4 × 3.5. I printed the…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
TP-Link Tapo C320WS Mount / Halterung alternative design of a mount for Tapo C320WS where you can guide the cable directly to the side.
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
Wydruk około 5,43 €–6,63 € nettoWstępna wycena jednego wariantu
The Leica M320 surgical microscope is state-of-the-art technology. Nevertheless, hazards can arise during operation.
Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu
I had built myself a KiwiCleaner watch parts cleaning machine. The KiwiCleaner design has a sealed PSU fitted to the underside of its baseboard. The PSU has a very short mains cable that cannot be safely replaced with a longer one. I…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you use an "EXTECH EX330" multimeter (although this also happens with other brands), you may have noticed that sometimes when storing it, the "NCV" button gets pressed. This causes the batteries to drain. To solve this, you can use…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
A really classic aircraft. After modeling the 737-800, I decided to model its rival, the A320 NEO. Both are to scale, same as my MD-11 and 747-100. Scale is 1:400
I 3D desingned this model to be print with commun paramethers, it doesnt require horizontal expansion. It just need supports in certain parts. The mechanism require 4 bearings of 32mm (there are 3D bearings models that you can print, so…
This is a detailed model of the airbus a320-200. I have made this model in blender so it may lose some detail when you are actually printing it. I hope you find this model useful as there seem to be no other free realistic aircraft models…
100% Accurate Frame Model (for airsoft)
Introduction: This is a 3D printable scale model of URAL 4320 , a heavy duty off-road capable truck designed by URAL for military and civilian operations. The model is designed in 1:32 scale for FDM 3D printing, which offers clean lines,…
Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…
Models of Airbus A320 Knobs for Home Cockpit build. Files with knobs for: Ecam Efis Knob 1 - with 3mm and 6mm hole Efis Knob 2 - with 3mm and 6mm hole Engine Master 1 Engine Master 2 FCU Knob 1 FCU Knob 2 FCU Knob 3 FCU Knob 4 Flaps Lower…
Dimensionally accurate three-part design that can be printed and used without painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour…
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
This model is compatible with the lego system.
Dimensionally accurate three-part design that can be printed and used without any painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any…
Dimensionally accurate MCDU with models for all buttons and lenses. Designed in 3 layers, with top layer 3D printed and middle and bottom layers either 3D printed, or CNC machined from 3mm acrylic. Designed to be screwed or glued together…
This model is compatible with the lego system.
New version of labels V2 https://www.printables.com/model/1364062-labels-for-korry-switch-a320-v2 Designed for A320 Korry switch https://www.printables.com/cs/model/103018-airbus-a320-korry-switch
This model is compatible with the lego system.
This model is compatible with the lego system.
An EFIS knob designed for 6mm shaft rotary switch. Marker line can be backlit if lightguide is printed in transparent or opaque material. Retained on shaft with 3mm grub screw Switch body printed in matte grey PLA. Lightguide printed in…
This model is compatible with the lego system.
Design to recreate the stepped and gated functionality of the Airbus A320 Flaps lever. Design objective was to create a realistic feel, with a smooth, solid and weighty action. The design therefore includes steel and brass shafts plus an…
a320 Overheadpanel (Not completed).
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
This model is compatible with the lego system.
This is a scale model of a type 3202A NMBS flat freight wagon. These models were build between 1966 and 1967. This is the version with the break. Couplings go in the NEM shaft that is included in the model. A slap of lead in the bottom…
AIRBUS A320 Airplane Pop Flat Card
Compatible with: Extruder: M3202 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers M3204 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers (Linear Rail Edition)…
Dimensionally accurate design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it feels…
Models for the upper and lower Frequency selector Knobs on the Airbus A320 RMP. Knobs are both in two parts to allow printing with top face upwards to achieve best visible finish. Printed in matte grey PLA, 100% infill. Knobs are a push…
This model is compatible with the lego system.
Three layer panel plus rotary switch mounting plate. Panels designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm…
This model is compatible with the lego system.
Korry style switch for the 7 buttons on A320 EFIS panel. 3D printed parts are Button Light Guide and Button Housing. Both printed in Black PLA, 100% infill, 0.15 layer height. Button Top Indicator and Bottom Legend are CNC machined from…
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
This model is compatible with the lego system.
Dimensionally accurate three-part design that can be printed without any painting or post processing. Designed to be fitted to 6mm shaft. Main body printed in matte black PLA Arrow infill printed in white PLA Label insert printed in matte…
This model is compatible with the lego system.
This project is still in development. Final version may be finished in few months. If anyone instested to print it and build it before in test version or modify files for personal use - you can use Fusion and modify internal parts as…
Noice plane base (WIP A320)
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
Korry Switch A320 – V2 This is the second version of my Korry switch model for the Airbus A320 , designed with better printability, improved accuracy, and easier assembly in mind. It’s ideal for home cockpit builders, flight sim…
This model is compatible with the lego system.
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
This model is for the airsoft version of the SIG Sauer P320 M17 from VFC. It's not for a real gun. Part you need to print: Body 1x Right side 1x Left side 1x Trigger 1x Endcap front (v1 or v2 ) 1x Endcap back ( v1 or v2) 1x Mag release…
Set of 6 parts to create lift and turn movement for Airbus Parking Brake Handle. Works with 90 degree Cam Switch 20A 1 Pole ON/OFF 90, which is pictured and can be found online Designed to work with my PARK BRK handle model:…
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
A simple cover for the projector Magcubic HY320. The cover is made in such a way that it is possible to stick soft material on the sides from the inside. Supports: yes.
ATTENTION. THIS IS AN OLD AND BAD VERSION!!!!!! YOU CAN FIND THE NEW V2 HERE: https://www.printables.com/model/1727793-airbus-a320-radio-managment-panel-rmp !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Update 2025-08/05 -…
This model is compatible with the lego system.
These are the three different switch heads of the A320 light panel and the black ring that goes at the bottom. Enjoy!
Design to recreate the Push Pull functionality needed for the ALT, Heading, Speed and Vertical Speed controls on the Airbus FCU. Design objective was to create a realistic feel, with a smooth, solid and weighty action. Push and Pull…
This model is compatible with the lego system.
A320/A330 131VU panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Important Note: While this panel can…
This model is compatible with the lego system.
2,8 TFT SPI 240x320 V1.2
This model is compatible with the lego system.
These are the DFX and STL files from the DIY Airbus Light Panel. I used a laser to cut the Panels and a 2.5 mm plate. I also uploaded the LightBurn project to edit and customize it on Thingiverse (https://www.thingiverse.com/thing:6789303).
Dimensionally accurate design for mounting on flaps lever shaft. Design needs support when printing, or splitting into two parts and then gluing. Printed in PLA with 100% infill. Variable layer height can be used on upper knob to reduce…
Here are some Temp Towers which you can easy use in the range which is needed in your case. You can coose a Temp Tower which is suitable for you. Each Temp Tower has a spread of 30°C which should be enough to calibrate your filament. The…
3 Pin Male Plug IEC320 C14 Chassis Panel Power Inlet Socket Connector I designed this thing in order to have the most detailed 3d Model of my CNC electronics enclosure. It is fairly accurate and should do for future CAD models that need a…
Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…
Reasonably dimensionally accurate flaps panel, designed to fit Skalarki size Pedestal. Panel size 148.5mm x 100mm. Solves the problem, how to engrave position legend on curved surface. 3 layer panel designed to be routed from 3mm cast…
I suspect they are rubber in the real aeroplane, but you're probably not going to actually put your feet on them. Printed in matte grey PLA. I used 50% infill to give them a feeling of solidity, but could be as low as 10% to save…
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
armorers block to assist in building the mup-1
🔧 Important: To achieve crisp, readable lettering, a 0.25 mm nozzle is required . Larger nozzles (like 0.4 mm) will not render the fine details of the raised text properly. 🧩 Two printing methods: Requires 0.25 mm nozzle for best results.…
A remix of my Double Shelf with HSW Sides 200mm in a larger size with an added middle shelf. 320mmW x 150mmD x 316mmH.
This model is compatible with the lego system.
Compact wall mount for Bosch ebike battery charger 2A BPC3200 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.
This is my Gear Ext. Projekt for my Airbus A320 Cockpit Category: 3D Printer Parts
Make of bean holder for Philips printables does not allow non-commercial license org model thing:5401987
Three part design that can be printed and used without any painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour and painted Light…
This is a 3D model of the IEC320 C14 Power Socket that comes with a Fuse Holder and a Switch for IEC C13 Power Cable connection. It's designed in Fusion 360, .f3d files are included. I tried to make the dimensions as close to real one as…
32039-Technic Axle Connector with Axle Hole
This model is compatible with the lego system.
yoRadio box. More information https://github.com/VaraiTamas/yoRadio.git
This was a pain to make, mainly because Fusion 360 ran so slow while I was designing this one along with some other issues i ran into, but I made it through and I think it was worth it! Anyways there are two models here. One is without…
P320 FCU Bending Kit (Work in progress) Machine: Klutch 3-1 Manual Brake Press This project is under construction and as I keep tweaking and testing, this will be my landing zone for uploading files and keeping the most current, tried and…
Model for the 15 Reception audio level control knobs on the Airbus A320 ACP. Not a perfect replica as the real knobs are illuminated when released out and have a collar that fits into the panel, but for me, close enough. Printed in matte…
A vertical stand for Dell R320. Print two of these. Also fits any other 1U rack mountable thingy with a 43mm side profile.
This wall mounted bracket is for an AT&T BGW320 Fiber Modem. It allows you to mount your modem on the wall securely. It includes the mount shelf with retaining tabs, a top clip, and an optional power supply mount which clips to the…
Korry style switch used on ECAM Control Panel in Pedestal. Designed to look similar to a real switch, with focus on a smooth click movement and even illumination, with no light bleed between top and bottom indicators. Tolerance between…
Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…
A basic bed texture to use with my voron printer (due to some mods, my effective print volume has been reduced to to 320x320). The grid has thick lines every 50mm and thin ones every 10mm.
Realistic model of Airbus A320 cockpit Microphone which mounts at rear of sidestick console. Print all body and mesh parts in black PLA, 100% infill for strength and solid feel. Model is split into parts so it can be printed without…
I recommend printing it in PETG The first version closes relatively flat at the top (e.g. if the party box is to be pushed under a table), the second version “mic higher” places the microphones higher. It would be nice if you post your…
For the axle, I used a 1 mm thick wire, and you also need a small spring. It's for a self-made A320 overhead panel.
Three layer panel and rotary switch holder. Panels designed to be CNC or laser cut from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear.…
![M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/708060/images/5554855_c8f0442f-02a2-401d-a399-6c8e5d4b0216_3490802f-a225-4f60-a8a5-b4a7a32cb31d/image1.jpg)
![M3202 Ender-5 / 5 Pro / 5 Plus [Micro Swiss NG Extruder] - Fan Shrouds and Brackets](https://media.printables.com/media/prints/752863/images/5874787_8bffd4fb-4eb5-421b-88d9-65f5b8c4600b_20be6ab3-368f-446f-9baa-60e0dd019b02/4ngender5_2400x2400.webp)
