Eurocopter AS365N3+ Dauphin Wall Art
Eurocopter AS365N3+ Dauphin Helicopter Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
- Pobrania
- 89
- Polubienia
- 10
- Ocena
- 5
Liczymy pasujące modele…
Eurocopter AS365N3+ Dauphin Helicopter Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Case need Support 10% Infill
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
Ich lade hier das Model einer Hager Verschlussschraube VZ225N des Ersteller nyyotam von thingiverse hoch. Beim Aufbau meines Unterverteiler sind mir diese Verriegelungsschrauben abgerissen und wenn man den Neupreis der Schrauben im…
Hello Makers, I've remixed a 3D-printable torque wrench. There are many different inserts with varying torque levels. 100% printable. No hardware required. The Original is from @ Perinski <3 I created this remix because I didn't have any…
Using this rotor in G.design's model you can reach 2.5Nm of torque For the maximum accuracy use Prusament ASA (possibly galaxy black) and the provided 3mf files There's also a more conservative version (2.3Nm) usable with stiffer…
It can print with No support . The 2 End Links have built in Support. I use this chain on my Voron 2.4 (10x15 originaly) The 3mf file has all parts needed without support ,just multiple the link and the latch. I've printed: 0.2 layer…
This adapter allows ZWO AM3, AM5, and AM5N mounts and pier extensions to be securely mounted on Innorel RT90C tripods. Using this adapter, the mount or pier won't spin on top of the plate. This adapter works well in conjunction with…
Die Vogelhauskamera WIWACAM MW5N wird folgendermassen geliefert: CPU-Einheit, an der das Kameramodul mittel Flachkabel unlösbar verbunden ist. Desweiteren ist an der CPU-Einheit eine Akku-Einheit angeschlossen und die WLAN-Antenne. Alles…
Easy to print waistpaper basket for left and right front door for second generation Volkswagen Tiguan. It snugly fits in the rear part, leaving room for a bottle. Rounden inside corners make easy cleaning. Infill: 100% No support needed.
Handles for protecting front and back of the radio while also raising it over surface. Printed from PETG. Create opposite piece by mirroring object in slicer software. Glued 4x round rubber feet (up to 8mm diameter).
Orient print with logo on the side, supports not required. If using 3 walls, 20% infill should suffice but I used 30%. M6 screws should be socket cap to aid in keeping the brick from sliding out the ends. If you've seen this print for…
This is a simple and functional 3D-printed holder designed specifically for the ZWO AM3, AM5, and AM5N hand controllers. The holder attaches securely to tripod legs with a 4 cm diameter, with a 38 mm inner diameter ensuring a snug and…
The tuning knob on my iCOM IC-A25N aviation radio cracked and broke. This is a replacement that's more robust. Material: PETG Layer height: .15mm Infill: 100%
this is a Pesa TWIST 2015N polish tram that i made a few monts prior, that i really like. The black parts have been poorly made, but feel free to modify them by your needs, also please modify the tram so that it can enter and print…
Dieser passgenaue Smartphone-Halter wurde speziell für den Volkswagen Tiguan der Baureihe 5N entworfen. Er sorgt für einen sicheren, vibrationsarmen Halt deines Handys und fügt sich dezent in den Innenraum ein – ideal für Navigation,…
Ich habe eine passgenaue Spezialhalterung für den VW Tiguan 5n entwickelt, die die beiden werkseitig vorhandenen Schlitze oberhalb der Radioeinheit optimal nutzt. Die Halterung wird ohne Werkzeug einfach in die Schlitze eingesetzt und…
This is a 2.5 Nm rotor for the original model from Patrick Harrer . The rest of the tool models can be downloaded there. This rotor was printed and tested with white eSun PLA+. The FreeCad model is included should you need to adjust the…
Replacement gasket for the high quality Wavian Jerrycan spouts. This is not the same as the gasket that goes in the jerrycan lid. Part number 2325N. The gasket for the Jerrycan lid is 2325 and can be found here…
The part that engages the film to rewind it on my Kodak Ektar H35N broke. This is a simple printable replacement. Print orientation I printed mine laying flat, because I was worried about the part being weak because of the layer line weak…
my paper delivery tray of my HP LaserJet 100 color MFP M175nw broke, here is my new one
The ZWO AM5N mount dropped the bubble level from previous AM5 and while it isn't strictly needed with good tracking, I like to get close to level to start things out. This sort of clips on to the AM5N and will hold this bubble level…
I made a stand for my Anytone AT-5555N II CB radio. The speaker was hard to hear when the radio was on the table. Printed on Flashforge AD5M. ELEGOO Matte PLA - I was printing at 225 degrees , Table - 60, Infill - 25%. Printed without…
Saw a reddit post about wanting a model with striations for their teacher. Grabbed a model from gradCAD, quick sketch, sweep and you have some striations. The punched primer is also tapered and at an angle but due to it's size, it is not…
A re-design of quick change TPU treads specifically for the SDS MK5n. These are a ground up re-design of the Quick Change Formlabs WCP treads : The MK5n version has geometry adjustments to make them last longer, and be easier/cleaner to…
This model is a set of handles for use with an Anytone AT-5555N II 10m all mode radio. They can provide some assistance in handling an unmounted radio, provide a measure of protection for the front panel & knobs, and raise the radio above…
TBT-5N Trebuchet for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • tbt-5n4.stl…
I edited cable saver for Simagic Alpha Mini 10Nm to Simagic Alpha 15Nm. It is 10 millimeters longer.
I don't like the screw-in version of my Triumph, so I made a stick-in one. And in white it's much better to see the oil on it. The length of the original depends a bit because of the o-ring, but I'm sure the printed one is well within…
fits the Gearwrench model 84925N socket set. May fit other similar sets but was specifically modeled for this set.
Things were bouncing around the deep center console of the Ioniq 5N so I built a tray with dividers for the insider and top mini tray for small things. Printed with PETG to handle heat, but anything with reasonably high temperature…
We have a couple of Ames Wrought Iron (design, it's plastic) 2391375NL Hose Reel that we've had pretty good luck with (the online reviews of it don't seem to be favorable though). One of the things we like about is is that the anchor…
On my VU48NC the locking pin was broken. A replacement costs like 6 € and with transportation around 13€. So i just made this model from the non-broken one to print a replacement yourself. Print Settings (recommend): Material: PETG / ASA…
LONG STORY SHORT: I lost the handle a long time ago and now used it as my second project regarding designing and printing usefull stuff. (: PRINT SETTINGS: I printed the part in Prusament Galaxy Black and it came out nicely. For details…
If you own a Hyundai Ioniq 5 / Ioniq 5N / Ioniq 6 or Kia EV6 with ventilated seats and almost never carry any passengers in the back, then this is for you. Redirect your precious cold air from your AC to your seats by swapping your stock…
Fair warning: I found this thing quite sensitive to changes in bed temperature, I guess the Y carriage warps somewhat as it gets heated by the bed. I'm now using an alternate mounts that's a bit, but not a lot better. A mount for the…
using support blocker for screw hole
6807z x2 M3 Screw x1 M6 Screw x1 Updated 20261030 Modified roller structure to reduce detachment. Deepened thread on wire fixing knob to reduce detachment. Added 3MP configuration file to version V2. My blog
https://www.amazon.nl/dp/B0BDLC8DNZ
Updates 07/2025: Made the rollers and clips slightly deeper to avoid occasional slips from the rail (clip v1.9/roller v1.5). Description Modified wheels/rollers for Midea SF 5.45NW10C dishwashers to increase the clearance between the…
This is a nozzle adapter for TRUSCO's Poly Tank (TP-5N). You can use this to prevent dripping. This adapter can be clipped on when not in use. You may tie the clip to the plastic tank body with a thread. Print Settings Printer Brand:…
Super Glue in a 6x3 magnet and use like the original. The 2.5 torque rating is from HarcosDesign 2.5nm rotor remix.
This adapter lets you use the UMR‑85N refill in your Lamy Safari Rollerball. UMR-85N instead of the M63F Extends the refill from a Uniball Signo 207 about 4mm to fit the Lamy Safari Rollerball. The front spacer is optional. The fitment is…
made this to prevent spilling deisel in the process of removing secondary filter on the cummins x15 engine
Use this small cover to avoid accidentally pressing your Kodak Ektar H35N's shutter button. Might also fit the regular H35 (not tested). Slide it on the corner where the shutter button is, and it should stay in place by friction. If you…
Change round inductive sensor to PL-05N
Remix for the 65mm / 5 inch version. Chamfer the screw holes so no support are needed for either file.
A replacement part for this old microwave. numbers: 4856745 4896099
I made this model to test my adhesion of small surface areas. Extremely hard (for me at least) to get to work. See how high you can go and share your settings. I have completed it myself after a fiddling a bit. Maybe I'm a noob, show me…
Sick of dealing with tangled cables when using your Dell charger? Does your charger cable constantly unravel in your bag, creating a mess? This 3D-printed cable organizer is designed specifically for Dell power adapters, allowing you to…
This adapter clamps around the rubberized portion of the handle on your Weller SP25N and provides a 43mm outer diameter to mount it into all Euro-standard drill stands. I designed this to go with the Olsson Heat Insert Tools, which are…
Repair part for the Tiguan 2 trunk shelf For 5NA 867 769
This is a replacement drive latch for a Drobo 5N, though it will likely fit any device in this family that uses a similar drive latch. The Problem: One of mine failed and as a result the drive kept working loose and getting kicked from…
This is a refill sharpener used to convert URM85N refill into a BRFN-30 compatible refill. "S" slot is used for the ink tube, while "T" slot is used for the tip. Here is the list of material you will need for this: M2.5 x 6 screws (2)…
Extended GX16 2p power ports for ZWO AM5 / AM5N EQ mounts BOM ZWO AM5 or ZWO AM5N 2x GX16 2p 16mm aviation socket some wires NOTICE Any modifications to ZWO electronics are at your risk only, you must know what you are doing, I offer no…
Ford D5NN34673A (D5NN-34673-A) 100-series tractor, steering column trim. Made this for 1979 4600 with Q-cab, but likely to fit many others. Printed in PETG. Holes might need some adjustment, but fortunately they will be hidden.
Print with PETG. Modeled according to ISO/R 518-1966 specs.
This is a simple, durable travel case for the 9A5N Solid State CW Paddle. The design is a two-part system: - Inner carrier that securely holds the paddle and protects the plug/blade area - Outer sleeve that slides over the carrier for…
Cisco camera cover to protect your privacy
My local supplier didn't have side covers for these particular terminal blocks in store, so I decided to print them instead. Works fine with PETG on Core One+, but presumably other materials and printers would also work fine. The two…
I picked up this UV light from Microcenter awhile ago, the "police security uv light 395nm". When going down the Gridfinity rabbit hole I noticed that there was not a holder for it yet. Hopefully this fills that gap.
It’s the attachment nozzle of the Bosch (Rechargeable vacuum cleaner MOVE 2in1 BBHMOVE5N) handheld vacuum — the little piece you clip onto the mini‑vac to focus the airflow. Used for: - getting into tight spaces (corners, sofa creases,…
Purpose I needed a cover to protect the lens of my UV flashlight just as an extra precaution since I'll be using it out amongst rocks and sand soon. Print Notes Orientation: The default orientation is all that's needed. Material: I…
YOSH charger: https://amzn.eu/d/01XR8VXx
A mount for a DARKBEAM 365nm UV Flashlight A hole is provided for a 1/4"-20 Threaded Insert to mount to a tripod. The insert is made for Wood Furniture and is not heat-set. The flashlight can be found at: https://a.co/d/06NMczS0 The…
Glycine is the smallest amino acid, with a single hydrogen as its side chain. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol plus proton…
Armitage Shanks Drive Insert – S9575NU (Tap Repair Part) REPLICA This is a replica replacement drive insert for Armitage Shanks taps , part number S9575NU . It is used inside the tap mechanism to operate the valve, allowing the tap to…
Glycine (C2H5NO2) - Multi-Color 3D Molecular Model (Space-Filling Spheres) An accurate, educational 3D printable model of Glycine (C2H5NO2) in classic Space-Filling (van der Waals / CPK Spheres) style. Ideal for chemistry classrooms,…
Used with standard VESA bolts - M8x1.25 45mm Diameter 12.5mm / 16mm, 35mm long
This is a simple and functional 3D-printed holder designed specifically for the ZWO AM3, AM5, and AM5N hand controllers. The holder attaches securely to tripod legs with a 4 cm diameter, with a 38 mm inner diameter ensuring a snug and…
Use this small cover to avoid accidentally pressing your Kodak Ektar H35N's shutter button. Might also fit the regular H35 (not tested). Slide it on the corner where the shutter button is, and it should stay in place by friction. If you…
A re-design of quick change TPU treads specifically for the SDS MK5n. These are a ground up re-design of the Quick Change Formlabs WCP treads : The MK5n version has geometry adjustments to make them last longer, and be easier/cleaner to…
H0 scale resin dozer kit with multiple blade and ripper configurations. I hope you enjoy building it!
This is a simple, durable travel case for the 9A5N Solid State CW Paddle. The design is a two-part system: - Inner carrier that securely holds the paddle and protects the plug/blade area - Outer sleeve that slides over the carrier for…
I made a stand for my Anytone AT-5555N II CB radio. The speaker was hard to hear when the radio was on the table. Printed on Flashforge AD5M. ELEGOO Matte PLA - I was printing at 225 degrees , Table - 60, Infill - 25%. Printed without…
This adapter lets you use the UMR‑85N refill in your Lamy Safari Rollerball. UMR-85N instead of the M63F Extends the refill from a Uniball Signo 207 about 4mm to fit the Lamy Safari Rollerball. The front spacer is optional. The fitment is…
A mount for a DARKBEAM 365nm UV Flashlight A hole is provided for a 1/4"-20 Threaded Insert to mount to a tripod. The insert is made for Wood Furniture and is not heat-set. The flashlight can be found at: https://a.co/d/06NMczS0 The…
It’s the attachment nozzle of the Bosch (Rechargeable vacuum cleaner MOVE 2in1 BBHMOVE5N) handheld vacuum — the little piece you clip onto the mini‑vac to focus the airflow. Used for: - getting into tight spaces (corners, sofa creases,…
This model is a set of handles for use with an Anytone AT-5555N II 10m all mode radio. They can provide some assistance in handling an unmounted radio, provide a measure of protection for the front panel & knobs, and raise the radio above…
H0 scale resin dozer kit with multiple blade and ripper configurations. I hope you enjoy building it!