49 modeli
While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Minitrix 18526 Support bobines. Collage après impression.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…
Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…
Great little ducted fan unit I made for an RC project. It is made for a Brushed 8520 motor. On the back of the motor aft core cover, drill a small 1/8" hole for the wires to pass through. I recommend using a 0.2mm nozzle for this print at…
Indestructible, light, flexible frame with camera and JST-connector mount. There is a hole on the floor to feed the receiver antenna through it. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter…
This model is compatible with the lego system.
Bmw E30\E28\E21 - door lock knob. OEM: 51 21 1 852 140, 51 41 1 911 964 Almost same with original part, but looks better for me. Perfectly fits on original lock pin. Can be used with the original sleeve. But i recommend to use custom…
Bmw E30\E28\E21 - door lock knob. OEM: 51 41 1 911 964, 51 21 1 852 140 Almost same with original part (a bit bigger in size for better fit in hole). Perfectly fits in original lock pin hole. Can be used with the original knob. But i…
This model is compatible with the lego system.
Queria hacer un dron sencillo para mis componentes especificos, Category: Hobby
Simple and durable frame for 8520 brushed motors. In replacement of the original LDARC Tiny R7. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0.16 Category: Hobby
This model is compatible with the lego system.
This model is compatible with the lego system.
Lost or broke original one? You will need 2x, M4x12 (ISO7045/DIN7985) screws to mount it. DIN912 or ISO4762 should be fine too. Design is optimized up to 0.35 mm layer height, and up to 0.6 mm nozzle.
This is a wiper arm nut cap for toyota models using the part number 85292-AA010. Clicks in place, fit is good and saves you like a dollar. This cap was used on a bunch of toyota models from the 2000s and i think still today on newer…
a propeller for ur boat projects
The propeller is made to fit in a 8520 coreless motor
Inspired by OB1 FPV Racer this is my new project. 120mm brushed FPV Racer. More stable than 90mm. Flight control with receiver: https://goo.gl/aoGdbV Suggested Motors: https://goo.gl/kKymxV AIO Camera: https://goo.gl/8JVVpf Triblades…
This is a very simple Gridfinity holder for the Wiha 2852. I printed it in PLA (quite fast actually).
Clips for Nissan roof rails 738524cl0a-05
Customized version of https://www.thingiverse.com/thing:3592064 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3592064 Instructions Using the following options: length = 852 Category: Accessories
Customized version of https://www.thingiverse.com/thing:3592064 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3592064 Instructions Using the following options: length = 852 Category: Accessories
Made the outer part of the guard thicker... and slightly increased the overall height... Print Settings Printer Brand: Prusa Printer: Prusa Clone **Rafts:** No Supports: No **Resolution:** 0.1 Infill: 100% Category: R/C Vehicles
PETG works best. 2-3 Layers, least infill is good.
This is the plastic part of the Pioneer mixer fader. I didn't find a replacement part at an affordable price, so I made an accurate and workable model for 3d printing. You need to position the model bottom down and use supports. You can…
My original sponge tray rusted so I made this one. I am sure this fits many more models. Print .32 layer height - 20% infill. Tinkecad'd: https://www.tinkercad.com/things/7Ui1wI97tFH
Works great on my line trimmer. Original snapped and i couldnt get parts so whipped this up real quick. Its a bit chunky without the sexy curves but it works and that all i needed.
Created for a friend who is rebuilding an old car and wanted to know if I could make this little plastic part. Apparently, the original part number is Delco-Remy 1852935 It fits inside an ignition distributor on many old GM cars common…
After purchasing a SRA Soldering Products 852A++ reflow station I discovered that the included vacuum pen clip was woefully inadequate. I designed a simple replacement part requiring only 2 M4*10mm bolts (SHCS). Print settings: Supports…
I made this to help with flying indoors. I still may have to tweak the design but so far so good. This is for the following frame with 8,5 mm motors aircraft http://www.thingiverse.com/thing:1852401 made by andoix. The frame flies better…
Nozzle holder for baku 852 smd rework station. Nozzle diameter 22 mm. Require 2 magnet bars 19x9mm
### English ### We have a Tefal SW852D Snack Collection sandwich and waffle maker (model from 2022). The feet of the appliance are so tiny that the whole waffle iron slides around on the kitchen worktop at the slightest touch.…
A tray to store the nozzles that came with the Aoyue 852A++ Pro. Includes compartment for suction/vacuum tips with a lid. Mounts with the existing vacuum tube mount screws and replaces the tube mount.
This model is compatible with major brick brands.
Repair of the stand for soldering station
Angle wedge risers for Bear Grizzly 852 840 (gen5) cast trucks. There have been two variants of the fifth gen bears, so here are two versions for both - one without cutouts on the side and with the protruding “bear” logo on the baseplate…
This is the hot-air handle for the soldering station W.E.R. 852D+. The original was too loose, and the hot air gun constantly dropped from it, causing a significant risk. Done in OpenSCAD, source included.
This is a replacement part for the clasp on the Sunbeam 3852 Waffle Iron. I couldn't find a parts online so I reverse engineered it and 3d printed my own replacement. You can find the model number on the bottom of the iron. Supports are…
First attempt at recreating the mounting clips for an MD5 Display. This has not been tested yet.
For general purposes "Holder" will suit the best, holder with horn gives you an opportunity to store fan backwards without putting the fan handle into the main part of the holder.
Install Helper / Guide for hammering in the bearings and seals in the 285203 kit. It's basically impossible to install the seals in this kit without some sort of guide. NOTE: Make sure you sand the inside of the tube the bearings/seals…
For some reason, replacement filters for the Maurer 81009 vacuum cleaner have become incredibly hard to find. If your vacuum is still working perfectly and you aren't ready to send it to the landfill, this adapter offers a practical…
The plastic base of my Molho Leone 78520 hole punch broke, but all the metal parts (punching pins, springs, lever) were still in perfect working order. Throwing away a fully working tool because of one cracked plastic part felt wrong, so…
Nozzle holder for baku 852 smd rework station. Nozzle diameter 22 mm. Require 2 magnet bars 19x9mm
This is a wiper arm nut cap for toyota models using the part number 85292-AA010. Clicks in place, fit is good and saves you like a dollar. This cap was used on a bunch of toyota models from the 2000s and i think still today on newer…
Minitrix 18526 Support bobines. Collage après impression.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
For general purposes "Holder" will suit the best, holder with horn gives you an opportunity to store fan backwards without putting the fan handle into the main part of the holder.
https://www.patreon.com/posts/34581649
