198 modeli
English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Accurately dimensioned model of the Stanley 1992 blade. The bottom length is 62mm, the trapezoidal height is 19mm. The trapezoid angle is 51 degrees. The notch spacing has also been accurately measured.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
Wydruk około 7,10 €–8,68 € nettoWstępna wycena jednego wariantu
EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
Wydruk około 5,43 €–6,63 € nettoWstępna wycena jednego wariantu
Battery tray bottom for 1982-1992 Camaro and Firebird with battery on Passenger side.
Wydruk około 10,00 €–12,22 € nettoWstępna wycena jednego wariantu
This is Wheel Hub Centric Rings Front and Rear for all 1982-1992 Camaro and Firebirds that are using Corvette Rally Wheels. These should fit original and aftermarket rally wheels. Printed on a Prusa Mk3s+ machine in ABS with fan disabled…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. They are the two midle part in the files. You can fix them together with glue. You can scale the parts as you want but…
**Update V2 in much higher detail. **I guess you can cut it with the new slicer by your own. Porsche GT3 RS detailed silhouette. Easy to print for up to 80cm length (4 parts) on Prusa MK3/4 bed size. Of course you can scale it the size…
Ich bin sehr großer Porsche Fan, und habe zum 24h / 2024 am Nürburgring einen Porsche 911 (992) GT3 2024 erstellt. Ich wünsche Euch viel Spaß und bin auf Eure Makes gespannt. Update Version: Ich habe die Felgen vom Modell getrennt. So das…
Celebrate the legendary Porsche 911 Carrera with this captivating wall art silhouette. Combining timeless design and exhilarating performance, this artwork pays homage to one of the most iconic sports cars in automotive history. The…
Porsche GT3 Cup edition Easy to print . Of course you can scale it the size you want. Easy to print for up to 110cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape…
This model is compatible with the lego system.
Porsche 911 Gt3 rs 992 wall art Silhouette
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
This project includes over 100 .STL files, the entire assembly .STEP file, Grip & Molding files, a DIY guide and more! You can get all the files from this public Google Drive link:…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model was created from a drawing I made in GIMP. To print it with two colors you have to insert a pause for filament change at the layer before the outlines will be created inside your slicer software. The base layer is just 0.7 mm…
This is a Model I created of the 2018-2024 Porsche Carrera 992. I placed the wheels separat from the car for better printability. Just glue them to the axle. Print with supports and scale it up or down. Let me know what cars you wanna see…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed the basic dimensions based on the 191 819 707 C or 191 819 719 B (Both are written on the same part), feel free to remix it to fit a gauge for example, sadly the “max” hole size is 45mm but you can probaly get up to 49mm with…
Remixed design by MB96 to be smaller, print faster with less material, and allow removal of the unit for easy battery replacement or on failure (I've had 1 out of 10 fail so far with a bad display). I used both hot glue and contact cement…
This is a highly detailed 3D printable model of the 1992 Ford Crown Victoria , a classic full-size American sedan known for its iconic boxy design and legendary durability. The model is designed for 3D printing enthusiasts, collectors,…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
hello i remixes this porshe for a stand
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I made theses wheels to complete the Porsche GT3 RS 992 Silhouette Wall Art by pino 1021 They can also be used for others Porsche 911 silhouettes, or even other cars if you want. Print I suggest printing them at the lowest resolution your…
This model is compatible with the lego system.
Edit 05/01/25: Fixed model issues with the logo not being connected to the frame Added a print Profile
This model is compatible with the lego system.
I wanted to add a bit of scale realism to my build especially since Tamiya typically only includes stickers for the exhausts. This is a simple print that attaches directly to the rear bumper plate
For the Milwaukee 48-32-9922 Customizable Large Case (One of Milwaukee's newer cases that fit Packout systems - not a Shockwave case). Grid-like structure to hold Dremel Bits. Small tab on the bottom of the insert to make it easier to…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is based upon the nominal dimensions of Stanley (R) Utility Blade No.1992 (11-921). Actual blades may vary in tolerance, as shown in Patent Drawings . I have not attempted to print this, but I've been using it to assist in the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just the CAD of the Cup wheel from 2026. the electronics you have to sort out :P
print them vertically will save alot of filler and sanding
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
This model is compatible with the lego system.
Hallo, ich habe einen Spoiler für den Carrera Porsche 911 GT3 R (992) entwickelt. Der Spoiler auf dem Bild ist aus TPU, der geht nicht so schnell Kaputt! Bitte gebt mir Feedback! Schaut auf meinem Profil vorbei – dort findet ihr weitere…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Beautiful silhouette of the Porsche 992 GT3. Suitable, for example, for hanging or just for display. I also recommend it as a gift for lovers of cars, formulas and others... Beautiful print! You can change the scale as you like, but don't…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.
Bram Stoker's Dracula - Count Dracula Old - 1992 3D printable model.
Front Door handle seals for MK1 Golf / Caddy / Rabbit. Should be direct fit for 171898201 These are available for purchase https://www.heritagepartscentre.com/eu/171898201-door-handle-seal-set.html but if you prefer to print them…
This is a Sketchfab converted model, it is a 1997 Asia towner, however I have customized two and made both a Towner and a 1992 Daihatsu Hijet, I hope you enjoy! Link to original model: Asia Towner / Daihatsu HiJet - Download Free 3D model…
I sized up the model by 300% i think. Cut into smaller pieces to fit Prusa bed.
This model is compatible with the lego system.
This model is compatible with the lego system.
For the Milwaukee 48-32-9921 Customizable Medium Case (One of Milwaukee's newer cases that fit Packout systems - not a Shockwave case). They hold the “The Original Thread Checker” set, except for the two largest sizes each for imperial…
Reservoir Dogs - Mr. Pink & Mr. White - 1992 3D printable model.
Bram Stoker's Dracula - Abraham Van Helsing (Anthony Hopkins) - 1992 3D printable model.
Unforgiven - Little Bill (Gene Hackman) - 1992 3D printable model.
This model is compatible with the lego system.
Unforgiven - Ned Logan (Morgan Freeman) - 1992 3D printable model.
If you drive with your windows down over 100mph (track events) in a 992, you will experience brain melting wind buffeting. On the 992 the effect is very bad and the products on the market did not address the issue for me >120mph. You can…
When my wife broke her leg, friends generously lent their Breezy Ultra 4 wheelchair to us to use while she recovered. When I was getting ready to return it, I noticed that 2 of the 4 cross-braces used to keep the armrests and wheels in an…
Unforgiven - English Bob (Richard Harrison) - 1992 3D printable model.
If you like you can add a color change for the stand to hide it. 0,2mm or 0,16mm No support. No brim. 14 min print. Falls gewünscht, kann man einen Farbwechsel für den Ständer einfügen; dann sieht man den Ständer nicht mehr. 0,2mm oder…
Porsche 911 Turbo S 992 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and 3.90mm and use a prime pillar Category: Keychains
MacGyver - Jack Dalton - 1985-1992
MacGyver - Peter Pete Thornton - 1985-1992
Candyman 3D printable model. Easy to print, just adjust size to your needs and go!
GM / Chevrolet 1992-2020 Multi-Purpose Retainer (Part number: #22600404) for cargo / convenience nets, etc. I created this model to replace a missing cargo net hook for a Chevrolet C7 Corvette. Given the GM part number, it should be…
Sister Act - Whoopi Goldberg - 1992 3D printable model.
I needed a rubber bumper for my OBS F350 hood so I copied one. I printed with Overture TPU with 3 walls and 15% cubic infill. It was a little soft so I would probably try 4 walls and 20% infill. 6 walls and 25% was too much.
Simple and elegant car wall art of Porsche 911 Turbo S.
Posche 992 GT3 RS This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
MacGyver - Murdoc - 1985-1992
MacGyver - Penny Parker - 1985-1992
1/15 scale, inspired by the Porsche 992 911 GT3RS rear wing, with the swan neck design. Print in PLA or PETG in the orientation in the stl or 3mf file with tree supports. This gives the best strength on thin parts and also uses the least…
Honda NSX-R 1992 The first-generation Honda NSX-R joins my Moving Wheels collection! Designed for FDM printing, this model features freely rotating wheels, separate rims, flexible tires and center caps with the Honda “H” emblem. Available…
This is a lithophane of the Porsche 911 GT3 (992) that lights up when backlit. A particularly low layer height is not necessary. You can just choose 0.2 or even 0.28 so it doesn't matter.
Chain was sagging from the joint on the extruder, made this little nugget to fix that.
Carry the ultimate track weapon in your pocket! This keychain captures the unmistakable silhouette of the 992 GT3 RS . Designed with a focus on its most iconic features—the massive swan-neck rear wing , the aggressive hood nostrils, and…
The Mighty Ducks - Emilio and the Gang - 1992 3D printable model
Curro was the Expo pet in Sevilla in 1992. It was an important pet inside Spain and at least two generations has grown with keychains and T-Shirts of Curro. Print Settings Printer: bq Prusa 3 Hephestos Category: Signs & Logos
A insert for the Milwaukee Packout version of the shockwave case that has a clear top. I bought the radius gauge set off amazon, but you can find the same set on aliexpress, etc. Print Settings: Material : PLA Supports: Yes - Automatic…
This 911 Turbo Model 930 Classic Silhouette wall art will give your office, room or garage a unique look that will catch attention to any racing, car enthusiast and will add a subtile touch to your home design.
Hey all, I needed some seat pulls for my rear bench seat on my Suzuki Alto Works as the old ones were broken. Will likely work for other models if you want to remix it.
A 2d wall mounted porsche 992 gt3rs Printed on: Ender-3 pro No specific print settings needed My print settings: Layer height: 0.2 Infill: 100% Support: No
You'll need a 1" #8 stainless screw to attached to the hockey puck. These then snap into the jack point areas. You can use the spider to center them.
Sleepwalkers - Charles Brady Bust - 1992 3D printable model.
Sleepwalkers - Mary Brady (Alice Krige) - 1992 3D printable model.
This model is compatible with the lego system.
