1 / 10
Hub Centric Rings for 1982 thru 1992 Camaro / Firebird
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hub centric wheel rings for Aftermarket Corvette Rally Wheels. May possibly fit original rally wheels. **Tight Fitment**
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is Wheel Hub Centric Rings Front and Rear for all 1982-1992 Camaro and Firebirds that are using Corvette Rally Wheels. These should fit original and aftermarket rally wheels.
Printed on a Prusa Mk3s+ machine in ABS with fan disabled and no heat box, room temp of 70F open air.
G-Code
- Resolution - 0.01mm
- G-Code flavor - Marlin (legacy)
Filament - ABS Glow In Dark
- Diameter - 1.75mm
- Extrusion Multiplier - 1
- Density - 1.25
- Nozzle Temp - First Layer - 255*C, Other Layers 255*C
- Bed Temp - First Layer - 110*C, Other Layers 110*C
Infill
- 100%
- Rectilinear
- 600% anchor
- 100% anchor length
- Top - Concentric
- Bottom - Concentric
- Enable ironing - Yes
- Ironing Type - Topmost Surface Only
- Flow rate - 12%
- Spacing between ironing passes - 0.1
- Combined every - 20 layers
- Sold Infill Every - 0
Skirt and Brim
- Loops - 3
- Distance from brim/object - 3mm
- skirt height - 0
- Draft shield - Disabled
- Brim Type - No Brim
Support Material
- Raft Layers - 2
- Raft Expansion - 5mm
Misc Settings
- Detect bridging perimeters - Yes
- Fill Gaps - Gaps
- Seam Position - Aligned
- Perimeter Generator - Arachne
- Fuzzy Skin - No
Speed Settings
- Perimeter - 60mm
- Small Perimeter - 15mm
- External perimeter - 50%
- Infill - 80mm
- Solid Infill - 20mm
- Top Solid Infill - 10mm
- Support material - 60mm
- Support material interface - 100%
- Bridges - 60mm
- Gap Fill - 10mm
- Ironing - 20mm - If enabled
- Travel - 130mm
- Z - 0mm
- First Layer Speed - 30mm
Advanced
- Default Extrusion width - 0.45mm
- First Layer - 0.45
- Perimeters - 0.45
- Externa Perimeters - 0.45
- Infill - 0.45
- Solid Infill - 0.45
- Top Solid Infill - 0.4
- Support Material - 0
- Infill/Perimeters Overlap - 35%
- Slice Gap closing Radius - 0.045mm
- G-Code Resolution - 0.01mm
- Minimum Feature Size - 1%