1 / 10
Hub Centric Rings for 1982 thru 1992 Camaro / Firebird — image 1
1 / 10

Hub Centric Rings for 1982 thru 1992 Camaro / Firebird

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hub centric wheel rings for Aftermarket Corvette Rally Wheels. May possibly fit original rally wheels. **Tight Fitment**

Rating
0 / 5
Likes
5
Downloads
22
Makes
0
Views
356
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

This is Wheel Hub Centric Rings Front and Rear for all 1982-1992 Camaro and Firebirds that are using Corvette Rally Wheels. These should fit original and aftermarket rally wheels.

Printed on a Prusa Mk3s+ machine in ABS with fan disabled and no heat box, room temp of 70F open air.

G-Code

  •  Resolution - 0.01mm
  • G-Code flavor - Marlin (legacy)

Filament - ABS Glow In Dark

  • Diameter - 1.75mm
  • Extrusion Multiplier - 1
  • Density - 1.25
  • Nozzle Temp - First Layer - 255*C, Other Layers 255*C
  • Bed Temp - First Layer - 110*C, Other Layers 110*C

    Infill

  •  100%
  • Rectilinear
  • 600% anchor
  • 100% anchor length
  • Top - Concentric
  • Bottom - Concentric
  • Enable ironing - Yes
  • Ironing Type - Topmost Surface Only
  • Flow rate - 12%
  • Spacing between ironing passes - 0.1
  • Combined every - 20 layers
  • Sold Infill Every - 0

     Skirt and Brim

  • Loops - 3
  • Distance from brim/object - 3mm
  • skirt height - 0
  • Draft shield - Disabled
  • Brim Type - No Brim

      Support Material

  • Raft Layers - 2
  • Raft Expansion - 5mm

      Misc Settings

  • Detect bridging perimeters - Yes
  • Fill Gaps - Gaps
  • Seam Position - Aligned
  • Perimeter Generator - Arachne
  • Fuzzy Skin - No 

    Speed Settings

  • Perimeter - 60mm
  • Small Perimeter - 15mm
  • External perimeter - 50%
  • Infill - 80mm
  • Solid Infill - 20mm
  • Top Solid Infill - 10mm
  • Support material - 60mm
  • Support material interface - 100%
  • Bridges - 60mm
  • Gap Fill - 10mm
  • Ironing - 20mm - If enabled
  • Travel - 130mm
  • Z - 0mm
  • First Layer Speed - 30mm

      Advanced

  • Default Extrusion width - 0.45mm
  • First Layer - 0.45
  • Perimeters - 0.45
  • Externa Perimeters - 0.45
  • Infill - 0.45
  • Solid Infill - 0.45
  • Top Solid Infill - 0.4
  • Support Material - 0
  • Infill/Perimeters Overlap - 35%
  • Slice Gap closing Radius - 0.045mm
  • G-Code Resolution - 0.01mm
  • Minimum Feature Size - 1%

Tags