1,843 models
The cam-latch closure on my original rugged box is still the toughest 3D printed box closure of all, but I know snap closures are convenient too. I made this extra tough snap closure, which will not break because it doesn't rely on layer…
This is a rugged box with hinges and latches. It can be made waterproof by printing a seal in flexible filament, such as TPU, or by cutting a large 2mm thick o-ring to the appropriate length. (There is also a version without the seal…
Printed without wheels. 3D Power Black PLA filament. cca 5 hours.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
I really liked the idea from Boogie for screw measuring/sorting helper but decided to design my own with some of his approach in mind. FEATURES size of a credit card so you can put it in your pocket or a wallet screw sizes M2 - M12 screw…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
A case for the Wemos D1 Mini ESP8266 PCB. It has holes on all 3 walls partially for ventilation but mostly for wire pass-throughs to make running wires in different directions easier. There are holes for the reset button on each side…
A sealable case for the NodeMCU ESP8266. Mounting screws hold in place while the lid snaps tightly on top and wont come off easily. This can be used standalone or as part of a larger project or design. This thing was made with Tinkercad.…
The badge on my E91 looked terrible and I've decided to design and print a replacement, because this is what people with 3D printers do, right? This badge has a diameter of 82mm and is designed to replace the hood badge of a BMW E90 , I…
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…
OpenScad case for esp8266 development board. Thanks to Sergio Vilches for the rounded corners!
Print pieces as follows: rack_side_btm x2 (flip one) rack_side_top x2 (flip one) rack_long_bar x2 rack_short_bar x3 (or short_bar_tabs) rack_side_attachment x2 rack_crossbrace x4 (flip two) Assembly: Glue side btms to side tops then glue…
Fusion 360 source file available! UPDATE 27.03.19: Remodeled designs from scratch in Fusion 360 and added slots to fit full size dupont connectors as follows: V2 - similar to the original but with duponts V2_Hollow - hollow bottom, more…
Burj Khalifa , the tallest building in the world, 1:1000 scale model There are several 3D models of this building on the Internet, I printed one myself as a gift for my cousin, who was in Dubai and saw this skyscraper. I am fascinated by…
I recently purchased a well-used camera lens which came with a lens cap that was missing the springs on one side. Seeing as I own a 3D printer and have access to the internet, that should be a not-really-a-problem that is easy to solve. I…
In my journey of learning Fusion 360, I took on this project as a test of my skills in design for the ease of printing, assembly and enjoyment of a quick shelf or desk top decoration or toy. The files are indexed in accordance to…
This case allows you to put the dupont wires inside the case rather than outside (in case you have a cat that likes to knock your stuff around). It provides a bit more security to keep things from being disconnected.
This model is compatible with the lego system.
You will need neopixel stripes and a microcontroller. I used an esp8266 for wifi sincronization. I used 4 neopixel per segment to improve the color persistance. https://www.facebook.com/media/set/?vanity=Menyiques&set=a.10213457141085498…
This remix takes the original model, cleans up its stlness, removes a small part of the back, adds a kickstand and most importantly - the wheels now rotate. You will need: black filament grey filament colour of your choice filament 2x…
Introducing the most accurate representation of the m821 mortar I could muster from tracing drawings from publications and looking at reference pictures. I was extremely pleased at some users who had printed my old mortar files and even…
BMW F82 M4 Wall Art Easy to print Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible and easy to remove. If you like to see more car…
Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…
just a stretched version fitting ESP8266 nodeMCU v3 from https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/samwiseg0/esp8266_nodemcu_din_mount by samwiseg0
Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…
Hello friends this is a simple case the Node MCU (ESP 8266). Route the cables through the case bottom before you solder them to the Node MCU. Support is needed for the Case Bottom. Print Settings Printer Brand: Creality Printer: Ender 3…
It's made for the LOLIN D1 Mini v4.0.0. The case doesn't fit older versions of the D1 Mini with micro-USB or components on the backside. Video: https://youtube.com/shorts/DUVmJcQiBqA Buy: https://spacehuhn.store/products/deauther-d1-mini…
This model is compatible with the lego system.
For fastening the honeycomb storage wall grid to the wall. This was a simple change from @roryshko's excellent ‘empty’ countersink model to use an 82 degree fastener instead of 90 degree. Also included are through hole versions, all with…
Upgraded my home router, and wanted to wall mount it just like before. This model uses the same mounting holes as this Xiaomi R3 mount . Print it with support, mount it, slide the router in, and you're done. V2 update: the bottom hook…
There are 3 parts to this. The top, bottom and an accent colour board (for some extra fun). The design doesn't serve too much of a practical purpose (the hexagons look cool) but, the pins are recessed into the case to prevent them from…
Node Robot Platform using ESP8266 for robotic development. This project is inspired by the SMARS robot but use ESP8266 as it heart for out of the box remote control. Hardware Needed hardware (all the link is for reference): 1x ESP8266…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
Key Features: Identification: The "ESP8266MOD" text is embossed on both the top lid and the side of the base for easy identification. Functionality: The top panel includes a rectangular cutout for a display (or pin access) and two…
===== CZ ===== Jedná se o kompletní krabičku pro převodník GBS-8200. Pokud stahujete mé modely, přispějte mi na vývoj pár korun. Vás to nezruinuje a mi to pokryje alespoň část nákladů na materiál spotřebovaný na testovací výtisky a…
I took the original Christmas Tree (Thing 1913982) and used a cone shape in Tinkercad to create a hole in it. It was printed in a Exelvan transparent filament using Vase Mode to create a clearer looking tree, and also a Yellow Gold from…
The F-82 Twin Mustang, based on the widely successful P-51 Mustang, was created to fill the role of a long range escort fighter for the Boeing B-29 Superfortress bombers, though the second world war had ended long before its 1946…
From the original upload: Tron recognizer from 1982 original to keep my previous lightcycle model company. This is a two colour Recognizer split into base and trim to allow for any colour combination. Enjoy
This model is compatible with the lego system.
Wall mount pieces for Lego set 75382 UCS TIE Interceptor (2024) 2-piece set to mount Lego set to the wall. Wall mount is angled in a way to show the Interceptor in slightly tilted down position, mainly as its mounted above head in its…
Case for multible ESP3266 dot matrix projekts. There are many projekts online, just search the web for ESP8266 and MAX7219 or dotmatrix. The drawer in the lid fits to the WeMos D1 Mini ESP8266 module. Close the lid with two M2.5 bolts…
Hager mountings 40mm (F82N) / 80mm (F82K), compatible with Hager 80/90 SL
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
Had someone ask me to model this up for them. They bought a similar one off Ebay and didn't like how thin it was, so I bulked it up a little and increased the supports. Holds the Dewalt DCHT820B hedge trimmer but I'm sure it could be…
ESP8266 node MCU V3 Case from AZ-Delivery
BMW M1. Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the…
this is basically the same mandrel of the Ivan’s V2 ECM set. but there have been 2 pin’s added so it can be used upside down like the with the V3 ECM set from ImmortalRevolt. but be aware that the V2 from Ivan and V3 from ImmortalRevolt…
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
A simple enclosure for Esp8266 board with 0.96 zoll oled display. Nedeed parts: four M2 screws wit the length 4 or 6 mm four inserts M2 inserts with 3.5 diameter and 3.5 mm height Print tips: no support needed print the lid with the top…
For my filament box I wanted to have a spool roller with following features: Shall save space in the filament box. Enable easy replacement of filament spool. Shall work for 1kg spools with ⌀200mm. Shall be robust and avoid jumping out of…
Geetech PLA Matte BambuLab X1C Mit Supports
Lid with Labeling for Jars and Pickle Jars This lid is specifically designed for Twist-Off 82mm jars and is perfect for storing dry foods such as rice, pasta, nuts, lentils, and similar pantry items. Please note that the lid is not…
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic Case for ESP8266 MINI D1 dev board No screws required Ventilation openings Can be mounted without unplugging the circuit board Includes housing with and without…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This PTT guard for the Baofeng UV-82 HAM Radio allows you to access the buttons by poking your finger through the holes, while preventing accidental activation while your ratio rattles around in a pouch. This is a very early version, but…
This is my case for the Wemos Lolin D1 mini v4 ESP8266. Please note that only the Wemos D1 Mini v4 fits in this case. This is my first CAD construction ever so feel free to make improvement solutions. Special credits go to my neighbour LS…
Print the two parts of the case without support and snap them together.
A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…
I remixed the Dremel Holder to hold the Dremel 8240. It can either be used with, or without the battery. However, if you leave the battery in the Dremel, it will stick out ~5mm and might interfere with the part next to it.
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Enclosure for a NodeMCU ESP8266 development board. The model fits boards with measurements being roughtly 26X49mm. The model is designed so that 5 Wagu 221 connectors can be mounted for connecting the LED-strip through a hole en one end…
Item #: SCP-682 Object Class: Keter SAFETY WARNING: IN CASE OF CONTAINMENT BREACH FROM THE 3D PRINTER BED IMMEDIATELY DEPLOY MTF * DATA EXPUNGED * TO RECONTAIN THE ANOMALY. SCP-682, we all love that hating creature so I decided to…
Small snap fit case for the D1 mini footprint of the ESP8266. Reset button still accessible The small gap next to the USB connector can be used for routing cables to connect to external sensors Prints without supports
I needed an option to mount the Wemos d1 mini module of my OctoPrint-Monitor to my enclose and made this simple mount/case. It holds the module tight (but not too tight to aviod damage of the module), so it can't slip out. To insert the…
This mount is designed to attach an ESP-01 microcontroller to a krom schröder gas meter. It fits into the recess of the gas meter in which magnetic pulses can be read with a reed switch. In my youtube-video ( https://youtu.be/i9hPf0uNzFE…
I made this model in Tinkercad, and used it with a hot nut insert press that I had previously made.
Ce porte canette (double) pour BMW E87-81-82 est parfait pour combler le petit vide poche inutile de nos voitures, Étant destiné a être mis dans une voiture, je conseille fortement de l'imprimer en ABS (ou tout autre matériaux résistant…
The small one is for the esp without the pins, and the tall one is for the esp with the pins.
1.3in OLED Screen case with ESP8266, used as stock ticker.
Model of a Soviet 82 mm mine on a scale of 1:1. Stabilizers are printed separately and glued.
Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a wall art of a BMW M4 which I drew and turned into a 3D print. If there are any issues with it, please let me know so I can improve. I created this model from a photo I took. Let me know if you want wall art of your car, I would…
Rafts: No Supports: Yes Infill: 20%
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Tennis Racquet grip size can be changed by removing the “pallets” from the handle of the hairpin of the tennis racquet. I believe in the USA Head is planning to no longer make the TK82 pallets available, so this seemed opportune. The…
UPDATE: Added a "Rugged" version with clips (pretty flimsy, take care) for an increased holding strength. A very slim case for the WeMos D1 Mini DISCLAIMER: I've designed this case to fit my WeMos board with very small tolerances. I hope…
I've tried to make a customizable socket to fit any module you are trying to Program such as the ESP8266 wifi module or a HC-05 bluetooth module. Prity much any module that is based on being a board to be surface mounted. The open SCAD…
I needed a key for a Toyota roof cross bar lock, so I made one. The keycode is 82, as shown in the photo (the number on the lock). This key is for Toyota part number PW301-02009. Category: Automotive
Backstory A friend of mine owns a Renault Twizy. The Renault Twizy is a small electric car with scissor doors. These scissor doors make contact with a door stop buffer (Renault Part-Number: 908782937R), which softens the movement when…
This model is compatible with the lego system.
I like the simplicity of this trailer and wanted to adapt it to fit the MN82 Land Cruiser. I scaled all parts to 125%. The drawbar was modified to fit the printable trailer hitch . It fits the standard MN82 and even my slightly lifted…
This model is compatible with the lego system.
Tapered and Flat Nozzle Attachments for M18 FUEL Dual Battery Backpack Blower ( 3009 ), M18 FUEL Dual Battery Blower ( 2824 ), M18 FUEL Blower ( 3017 ), and the M18 FUEL QUIK-LOK Blower Attachment ( 49-16-2793 ). Also compatible with my…
This is a station box designed for the Wemos D1 Mini and the standard 0.96" 128x64 OLED display. Get creative with Arduino code or load some of the awesome Wemos applications out there. The Wemos D1 mini will slide in and is held in place…
Bmw reverse (rds\non-rds\bavaria\business) audio device side covers. OEM-number: 65 12 6 907 823 This device can be used on Bmw E30\E32\E34\E36. Reproduced with the example of original part. Perfectly fits and holds on its original place.…
LEGO Compatible 87082-Technic, Pin 3L with Friction Ridges and Center Pin Hole
A kit card of my favorite Corvette model, the 1967-1982 C3 Corvette (Technically it's the Z01 but they use the same bodywork and this isn't a high-res model.) Tires should spin if axle is glued on right. I also sell these on Etsy:…
Ersatz Gummipuffer Heckklappe am Megane 2 Coupe Cabriolet. Da dieses seid Jahren schon nicht mehr bei Renault verfügbar ist, habe ich selber einen Designend. Die Montage ist etwas unentspannt, da die Aufnahme sehr eng ist. Mit etwas…
Deckard Type - Blade Runner 1982 - BIC Lighter Sleeve Cover - Cover accendino BIC This a Blade Runner 1982 style 3D printable Bic lighter sleeve Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed…
This model is compatible with the lego system.
Hallo, Ich habe hier einen Kupplungsschlüssel modelliert, der auf die Baugrößen B und C der Storz-Schlauchkupplungen passt. Diese Art von Schlüssel wird unter der Norm DIN 14822 beschrieben. Storz-Schlauchkupplungen werden für große…
This model is compatible with the lego system.
Beautiful pencil vase for decorative purposes to hold pens and pencils, or anything else. It is 115mm tall and 78mm wide. Print time approximately 2 hours 20 min. with a single wall at print speed of 50mm/s. The photo shows the vase…
Hello! This model was completely unplanned, in fact i didnt even plan on doing any other figures! But @jonesnet approached me here in DMs and asked if i could make a swimming pilot for his upcoming diorama. And i was like, hmm why not?…
This is simple and easy to assembly case for MAX7912 and ESP8266 informer. It looks minimalistic and nice. V2 update (26.02.2021): Added version with display grid. It looks much better. Front part of the case is universal for both…
