Counting matching models…
Model je určen pro zkušené modeláře. Model je stejné koncepce, jako zde mnou zveřejněná dakarská Tatra z roku 1990. Pro tu jsem ale sepsal podrobný návod, doporučuji přečíst a nastudovat! U Tatry 6x6 je větší změnou pouze poháněná přední…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
time to take that oldy Foxbody to the asphalt!... or at least at your wall
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LEGO TATRA DAKAR 1986 Base
From Wikipedia: “The Great Salt Lake is the largest saltwater lake in the Western Hemisphere , [1] and the eighth-largest terminal lake in the world. [2] It lies in the northern part of the U.S. state of Utah , and has a substantial…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I found the base model truck from tinkercad I modified it in multiple different ways, wider fenders for clearance modified truck bed, hitch on front and back and battery cut out + more, thanks and enjoy :)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Sci Fi Movies - Aliens - Bishop - 1986 3D printable model.
Airwolf - Stringfellow Huckleberry - 1984-1986 3D printable model.
Maximum Overdrive - Green Goblin Truck - 1986 3D printable model.
Platoon - Big Harold - 1986
Airwolf - Dominic Santini - 1984-1986 3D printable model.
Ferris Bueller 3D Print model. This one prints in 3 pieces, the figure, the name sign, and the square base. If you change the size of any part, you will need to resize all parts accordingly. Glue the letters together in a stack after…
Jon Bon Jovi - Slippery When Wet - 1986 3D printable model.
Top Gun - Lt. Nick Goose Bradshaw - 1986
Platoon - Lieutenant Wolfe - 1986
Top Gun - Charlotte Charlie Blackwood - 1986
The Hitcher - John Ryder - Rutger Hauer - 1986 3D printable model.
Platoon - Sergeant O'Neill - 1986
Sci Fi Movies - Aliens - Rebecca Newt Jorden - 1986 3D printable model.
Red Dawn - Chris Taylor - 1984
Hardcastle and McCormick - 1983-1986 3D printable model.
Howard the Duck - Lea Jamming - 1986 3D printable model.
Airwolf - Michael Archangel Coldsmith-Briggs III - 1984-1986 3D printable model.
Top Gun - Cmdr. Mike Viper Metcalf - 1986
CZ korba je mix toho co se mi líbilo a co bylo funkční, par nápadu třeba jako rezervy z boku napadlo mého tátu když jsme se o tom bavili, nápad to byl dobry. No ale i tak to není replika ničeho, nebo tak nenasel jsem nic co by takto…
Horror Movies - The Fly Collage - 1986 3D printable model.
Howard the Duck - Overlord - 1986 3D printable model.
War Movies - Heartbreak Ridge - Swede: I'm gonna Rip Your Head Off and S--t Down Your Neck - 1986 3D printable model.
Iconic Movie Moments - Little Shop of Horrors - I Am Your Dentist - 1986
Ferris Bueller's Day Off - Ed Rooney (Jeffrey Jones) - 1986 3D printable model.
BMW E30 M3 1986-1991 Racing
Matlock - Benjamin Leighton Matlock - 1986-1995
Matlock - Charlene Matlock - 1986-1995
This works as a replacement reserve fuel valve petcock lever with part number: 16952-HA7-880ZA. I built the model with a sacrificial 0.2 mm layer where the hole transitions in order to force the slicer to build a bridge there. Just poke…
CZ Spz s vice barvami které jdou tisknout výměnou barvy po určíte výšce v tomto případě výměna barvy po vrstvě ve výšce 0.6mm výška vrstev 0.1mm bez podpěr případně zapnout ironing pro pěknější výsledky EN Number plate with multiple…
print from PETG 0.2mm layerheight with supports
Stock lug nut caps which are typically grey, fit from 1986 to 1990. These are threaded to fit on top of the stock lug nuts. See my other design for a lug nut cap which fits on the McGard locking lug net set, which has a slightly larger…
Iconic Movie Villains - Blue Velvet - Frank Booth - 1986
https://nicksdocumentation.home.blog/2018/11/30/1986-nissan-300zx-hvac-repair/
Honda Monkey plastic parts for light switches. Fits for model year around 1980 and few years later. Category: Hobby
Matlock - Julie March = 1986-1995
My models aren't perfect, but they're fun! Requests and exclusive models available with club memberships. Enjoy!
budete potrebovat 2x M3x10 1x 0.36" voltmetr https://www.aliexpress.com/item/1005005917121603.html 1x 6x6 vypinac https://www.aliexpress.com/item/32912263133.html ano, součásti tohoto modelu jsou originální soubory na box
Matlock - Tyler Hudson - 1986-1995
While designing a custom bezel for a unique shifter setup in my car, I modeled this, a fully 3D printable recreation of the original Ford piece. The bezel prints in 3 parts- the main body (white in the image) and the two "posts" (red)…
After using my original 3D-printed tile tray designs for several months, I decided to refactor them and add some features to improve the usability of the boxes: Rounded boxes -- All of the boxes now use rounded corners and edges that make…
I made this awhile ago to replace the shift knob in my dads 1986 Ford Ranger. It uses a set screw but don't remember the size.
Designed this for 2 color printing for my little runabout. Use Case You want a new dash panel for your boat You want to switch from a circle ignition switch to a rocker switch This switch enables “push” button-start for your boat Parts…
McGard makes locking lug nuts, but unfortunately, the OD thread on the lug nuts don't match the stock C4 lug nuts, so your stock caps don't fit, and the caps that they sell for these aren't even close to the style of the stock caps. The…
My youngest brother is rebuilding a 1986 Ford Bronco XLT. In his search for replacement parts, he found that he could not find any switch bezels for the power windows/locks that go on the doors. I decided to take a swing at it using the…
Often missing or damaged parts of a door handle on 1986 Ford Thunderbird. Both black piece and cover are models based on existing parts. I tried to print them in various orientations and I got the best results printing the cover with the…
Foto ist ein Beispielbild. Photo is an example image.
This armrest design clips right into the location of your old one without any modification. STL files are included for convenience, but you should use the STEP files for you print!! There are two variants: A slick, basic armrest A…
Wall holder for Epson remote controller: 219863800. The remote control is used for several projectors, such as EH-TW7000, EH-TW7100, Home Cinema 3200, Home Cinema 3800 and more.
Tool box lid and latch for Honda CB700SC Nighthawk S. Unknown if latch will work with factory lid as i designed this part from the grooves in the airbox and pictures. When printed it fits and works very well. Minor filing on latch…
Labyrinth Token (Board Game 1986)
Mirror the model to get the left side housing. Print in abs/asa or anything else with high temp resistance. I plan on using abs, vapor smoothing it and spraying chrome spraypaint inside for the reflector coating
The need came to replace the stock drain tubes for a 1986 Jaguar X series and with some adjustments to the print settings, was able to design and print these parts successfully with materials exceeding the 125C OEM standard for…
I am uploading this for a fellow Mustang owner but it may be useful for others as well... This is a custom shifter bezel that I did for my car. Like my other model (shown below), it is designed to fit into the factory location. However, I…
Replacement exterior side trim clip for the Mazda RX-7 FC3S (1986–1992). These small plastic clips hold the exterior body side trim strips to the doors and body panels. The originals are now 38+ years old, discontinued from Mazda, and…
SynthPad 1986 is a standalone touchscreen synthesizer built around the Arduino UNO Q. This is its enclosure: a portable case that holds the board, a 7" touchscreen at a 45° viewing angle, two potentiometers, a USB speaker and a USB-C hub,…
A cap for the bolt behind the instrument cluster on a 1986 Suzuki Samurai, so it cannot short against whatever metal sits behind the dash. The original is a rubber-like molded cap; this is a printed stand-in, press-fit over the same bolt.…
I wanted to use a minimal bracket with a shorter throttle cable for my side intake SVO with a 5.0 throttle, without extras like the AOD cable or any carb leftovers. It may not be compatible with the 1995 throttle, v6 throttles, or the…
The interior rearview mirror on a 1986 Suzuki Samurai mounts over a small spacer. Mine needed replacing, and it is not a part anybody stocks on its own. So I drew it. This is a direct replacement: same job, same place, no trimming and no…
Updated, Split top section from bottom for easier printing and slicing so you can stagger seams for a stronger end result. Also corners fit better, top screw holes my need ovaled for installation. Made a remix of the 79-86 Mustang dash…
Little Shop of Horrors is a popular science fiction horror-comedy about a man-eating plant.
Mirror the model to get the left side housing. Print in abs/asa or anything else with high temp resistance. I plan on using abs, vapor smoothing it and spraying chrome spraypaint inside for the reflector coating
The Wraith - The Car "Dodge M4S Turbo Interceptor" - 1986 3D printable model.
The Hitcher - John Ryder - Rutger Hauer - 1986 3D printable model.
