1986 - 1989 TRX Foreman/Fourtrax Reserve Fuel Tank Lever
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement reserve fuel tank petcock valve lever.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This works as a replacement reserve fuel valve petcock lever with part number: 16952-HA7-880ZA. I built the model with a sacrificial 0.2 mm layer where the hole transitions in order to force the slicer to build a bridge there. Just poke through it when complete. The square recess on the back is purposely undersized so as to provide a strong grip on the petcock valve. If you have difficulty pushing it on, use a blow dryer or similar to heat the piece a bit, then try again.
The user print file was tailored to use Protopasta PETG. Configure according to your preferred settings.
Print Settings:
layer height: 0.2 mm
perimeters: 5
fill density: 40%
Do not use supports.