1986 - 1989 TRX Foreman/Fourtrax Reserve Fuel Tank Lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement reserve fuel tank petcock valve lever.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This works as a replacement reserve fuel valve petcock lever with part number: 16952-HA7-880ZA. I built the model with a sacrificial 0.2 mm layer where the hole transitions in order to force the slicer to build a bridge there. Just poke through it when complete. The square recess on the back is purposely undersized so as to provide a strong grip on the petcock valve. If you have difficulty pushing it on, use a blow dryer or similar to heat the piece a bit, then try again.
The user print file was tailored to use Protopasta PETG. Configure according to your preferred settings.
Print Settings:
layer height: 0.2 mm
perimeters: 5
fill density: 40%
Do not use supports.