103 models
“Keith Haring signs an obvious motive of love!…..The heart is in celebration, the two characters gesticulate, as if carried by the euphoria of feelings. The contours are frank and clean, thick black lines which have made the young street…
This is Wheel Hub Centric Rings Front and Rear for all 1982-1992 Camaro and Firebirds that are using Corvette Rally Wheels. These should fit original and aftermarket rally wheels. Printed on a Prusa Mk3s+ machine in ABS with fan disabled…
In my journey of learning Fusion 360, I took on this project as a test of my skills in design for the ease of printing, assembly and enjoyment of a quick shelf or desk top decoration or toy. The files are indexed in accordance to…
This remix takes the original model, cleans up its stlness, removes a small part of the back, adds a kickstand and most importantly - the wheels now rotate. You will need: black filament grey filament colour of your choice filament 2x…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
From the original upload: Tron recognizer from 1982 original to keep my previous lightcycle model company. This is a two colour Recognizer split into base and trim to allow for any colour combination. Enjoy
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A kit card of my favorite Corvette model, the 1967-1982 C3 Corvette (Technically it's the Z01 but they use the same bodywork and this isn't a high-res model.) Tires should spin if axle is glued on right. I also sell these on Etsy:…
Deckard Type - Blade Runner 1982 - BIC Lighter Sleeve Cover - Cover accendino BIC This a Blade Runner 1982 style 3D printable Bic lighter sleeve Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is an alternate hand model for LUCKY 13 inspired by the Identity Disk from Tron (1982), which recently celebrated its 40th anniversary! This can be printed without supports.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
https://www.thingiverse.com/thing:489709's Carabiner
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Creepshow 1982 3D printable model. Super easy to print. This model is very large and will take a long time and a lot of material to print.
A Kit card of my favorite Pontiac Firebird model, the gen 3 1982-92 version. Needs glue for the axle to body connection but the wheels should spin freely if done right. I sell assembled versions over at: https://glacierfrost.etsy.com
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Thing - The Norris Thing - 1982 3D printable model.
Blade Runner - Eldon Tyrell (Joe Turkel) - 1982 3D printable model.
Cat People - Irena Dubrovna (Nastassja Kinski) - 1982 - 2 VERSIONS 3D printable model.
Mork & Mindy - Mork (Robin Williams) - 1978-1982 3D printable model.
Blade Runner - J.F. Sebastian (William Sanderson) - 1982 3D printable model.
Blade Runner - J.F.'s Toys-Kaiser & Bear - 1982 3D printable model.
American Werewolf in London - 1981 3D printable model. Very easy to print, size to your needs and go!
The Thing - Copper's Demise - 1982 3D printable model.
I decided to make grilles for my 1984 Camaro restoration because reproductions were expensive and a guy on ebay selling 3D printed ones was more expensive than reproductions. To be frank, I did this out of spite lol. I spent a good bit of…
Blade Runner Inspired Cityscape - 1982 3D printable model.
Cheers - Sam & Diane - 1982 3D printable model.
EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…
The Amityville Horror - 1982 3D printable model. Prints in 2 parts. The large scene with the house, and the name plate. This is a large model and will take a lot of time and material to print.
Cheers - Carla - 1982 3D printable model.
Cheers - Norm & Cliff - 1982 3D printable model.
Iconic Movie Moments - Pink Floyd The Wall - We Don't Need No Thought Control - 1982
Iconic Movie Moments - Pink Floyd The Wall - Pink Slips Away - 1982
Battery tray bottom for 1982-1992 Camaro and Firebird with battery on Passenger side.
Cheers - Dr. Frasier Winslow Crane - 1982-1993 3D printable model.
Iconic Movie Moments - Star Trek II - Kirk Raging KHHHAAANNNN! - 1982
Iconic Movie Props - Blade Runner - Origami Unicorn - 1982
Iconic Movie Moments - Pink Floyd the Wall - Pink Meets Pink - 1982
Iconic Movie Moments - Pink Floyd The Wall - We Don't Need No Education - 1982
Iconic Movie Moments - Pink Floyd The Wall - Pink Dictator Speech - 1982
This is a replacement of the rear window handle
Cheers - Dr. Lilith Sternin - 1982-1993 3D printable model.
Fast Times at Ridgemont High - Spicoli's Dream - 1982 3D printable model.
Lou Grant - Herb Herbert - 1977-1982
Cat People - Paul Gallier (Malcom McDowell) - 1982 3D printable model.
Cheers - Woodrow "Woody" Huckleberry Tiberius Boyd - 1982-1993 3D printable model.
Lou Grant - Lou Himself - 1977-1982
Wheel of Fortune - Vanna White - Turning Letters Since 1982 3D printable model.
When restoring a Turbo Seca (XJ650LJ) i picked up, i could not find a replacement air filter since the air box is only for this model (turbo version) made for two years. So i bought one that would fit within the air box from a Moto Guzzi…
Lou Grant - Art Donovan - 1977-1982
Iconic Movie Posters - John Carpenter's The Thing - 1982
Lou Grant - Billie Newman McCovey - 1977-1982
Lou Grant - Charles Hume - 1977j-1982
Lou Grant - Joe Rossi - 1977-1982
Honda Monkey plastic parts for light switches. Fits for model year around 1980 and few years later. Category: Hobby
Lou Grant - Margaret Pynchon - 1977-1982
I have an old Borugham Motorhome (1983) built on a 1982 Ford E-350 cutaway chassis. When working on it I decided to replace the Stereo and to do this I had to cut apart the dashboard to fit it. To support the stereo I designed and printed…
Keychain Italia Mundial 1982 #6 Scirea
Schrankgriffe / Cabinet handles Wohnwagen / Caravan → 0.4 Nozzle → 0.2mm Layer Height, → 40% infill, → PLA
This gearbox interfaces the three different worm gears on the sunroof mechanism for an early Porsche 944. With these cars now 40+ years in age, the original plastic gearboxes are starting to crack, and in cases like mine, disintegrate…
This 3D model accurately recreates the classic Epcot Center logo used from the park's 1982 opening until 1994. The design prints at a uniform 8.3mm thickness with raised text. No AMS system needed. For multi-color printing, simply pause…
This is a set of printables for successfully mounting 1977 Tail Lights in the 1980 - 1982 Corvette rear bumper. Print the hole template using draft mode out of PLA. Use the small hole to secure the template to the car, so it doesn't move…
cool haring heart image to use as a coaster or a magnet. 111mmx111mm uses four 8mm x 1.5mm magnets. The filament is Polymaker Panchroma Matte: Army Red, Muted White, Cotton White, Matte Black
Modeled after the original piece except for the number on the bottom. Just write the appropriate number. Prints with supports
A friend restores corvettes, and needed a trim piece for a limited edition 1982. It's the only model with a rear hatch. A factory replacement costs around $90USD. Printed in TPU to round the corner. I recommend using Polymaker HF TPU as…
TSR logo used from 1980-1982. This was my favorite logo as this was on all the books I owned. The base is 2mm and the writing and wizard head on top is 1mm thickness as it is hard to see his features if much deeper. Print and glue magnets…
Print Settings Material: PLA works but you may wish to print this in a stronger material like ABS / ASA / CF-Nylon Layer Height: 0.2mm Infill: 20-50% There really isn't much infill in this model, but you want it to be strong Take care…
The kill switch on the 1982 Yamaha XT 550 dirt bike has a weak point in the switch. Instead of buying a whole new kill switch module, the switch itself can be easily replaced. I modeled the part after the original piece. I printed out of…
Print Settings: Material: CF-Nylon You want this to be capable of withstanding ambient heat radiating off the engine as it's relatively close when mounted Layer Height: 0.2mm Infill: 20-50% You want this to be strong to account for…
→ See also the bulkier version. Another set of the game pieces for the great game, the slimmer one. All information about the game is at boardgamegeek . Highly recommended! This version is partially based on original design. Packing them…
→ See also the slimmer verion. Set of the game pieces for the great game. All information about the game is at boardgamegeek . Highly recommended! It's a real gem. This version is partially based on original design, but pieces are made a…
This part is a bed-light lens for a 1976-1982 Plymouth Arrow pickup that is no longer in production and so I made it with calipers from a damaged original in TinkerCAD ( https://www.tinkercad.com/things/2m4Mkd3qS7e-imasen-1189-200 ). It…
If you're like me and were almost done with your carb clean/rebuild for... a while, you might also be like me and want a plug to keep critters from crawling into your engine via the intake boots. I swapped out the shop rags stuffed in the…
Dieser Windstopper wurde speziell für Schüco-Aluminiumfenster aus dem Jahr 1982 entworfen. Da das Originalteil fehlte und nicht mehr erhältlich war, habe ich diesen Ersatz vollständig neu konstruiert. Das Design basiert auf den genauen…
A 3D-printable reconstruction of the Batcave sign from the legendary London club night , launched in Soho in 1982 and closely associated with the emergence of the early goth scene. The Batcave began at the Gargoyle Club at 69 Dean Street…
String art concept of the amazing car Lotus Esprit 1982. Beautiful lines, pointy nose and nice looking rear! Scale it however you want, remember infill to fit the top layers if you scale it very large. Grab the 3mf file for easy print, or…
