Counting matching models…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A kit card of one of my favorite Corvettes the C4 1983-1996 model. The tires should spin if the axle is glued in right. I also sell these on my Etsy: https://glacierfrost.etsy.com
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Chevrolet van or Chevy van (also known as the Chevrolet/GMC G-series vans and GMC Vandura) is a range of vans that was manufactured by General Motors from the 1964 to 1996 model years. Introduced as the successor for the rear-engine…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/e1V2Qezh6rN Category: 3D Printing
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4GTceEOOOpH Print Settings Printer: Cetus 3D Mk2 Rafts: Yes Supports: Yes Resolution: 0.05mm Infill: 99% Filament: Rigid Ink PLA Grey Category: Vehicles
Lego Technic 4198367 Axle Connector Double Flexible TPU replacement
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kmP4DXM1LJ7 Category: 3D Printing
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Front Door handle seals for MK1 Golf / Caddy / Rabbit. Should be direct fit for 171898201 These are available for purchase https://www.heritagepartscentre.com/eu/171898201-door-handle-seal-set.html but if you prefer to print them…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
M.A.S.H. - Corporal Walter Eugene Radar O'Reilly - 1972-1983
Dungeons & Dragons - Venger on Night-mare - 1983 3D printable model.
M.A.S.H. - Captain Benjamin Franklin Hawkeye Pierce - 1972-1983
The Professionals - Ford Capri Mk III 3.0 S (1978) - 1977-1983 3D printable model.
Action Movies - Blue Thunder - Officer Frank Murphy - 1983 3D printable model.
Videodrome - Nikki Brand (Debbie Harry) 1983 3D printable model.
M.A.S.H. - Colonel Sherman T. Potter - 1972-1983
M.A.S.H - Captain John Francis Xavier Trapper McIntyre - 1972-1983
M.A.S.H - Captain B.J. Hunnicutt - 1972-1983
M.A.S.H. - Major Margaret Hot Lips Houlihan - 1972-1983
This is my copy of the McMaster Carr Swedish Fish. This model originally appeared as the 3D model of the Swedish fish. It was taken down shortly after I posted this discovery on Twitter. This file has sat in my Fusion account for years.…
Rock Bands - Motley Crue 3D printable model.
M.A.S.H. - Lt. Colonel Henry Blake - 1972-1983
M.A.S.H. - Major Frank Burns - 1972-1983
Cujo - 1983 3D printable model. Super easy to print. This is a very large model and will take a long time and a lot of material to print.
The two halves clamshell over an aftermarket LED headlight. It can then be mounted to the stock location using the original hardware. Printed with supports in PLA. Might recommend PETG for durability. The design utilizes M3 and M5…
M.A.S.H. - Lieutenant Captain Father John Mulcahy - 1972-1983
The Brute in a Tuxedo, Cast in Malice. This is not a car. This is Britain's answer to Armageddon, cast in hand-beaten steel. The Aston Martin V8 Vantage immortalizes the uncompromising, iron-fisted authority of a gentleman who has…
Action Movies - Blue Thunder - Officer Richard Lymangood - 1983 3D printable model.
Hardcastle and McCormick - 1983-1986 3D printable model.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7vM8LBqHMnv Category: 3D Printing
Reuploaded, to share in printables. This is a remix uploaded on thingiverse.com by mji1983 with the original its based on by Tattoed1980 , download it there to show the support. As of today I got aproval from Tattoed1980 to share it…
Honda MTX50 year 1983 scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
M.A.S.H. - Major Charles Emerson Winchester III - 1972-1983
Action Movies - Blue Thunder - Col. F. E. Cochrane - 1983 3D printable model.
M.A.S.H. - Corporal Maxwell Q. Klinger - 1972-1983
Twilight Zone_ The Movie - Uncle Walt's Hat Trick - 1983 3D printable model.
Iconic Movie Moments - Risky Business - That Ol' Time Rock n Roll - 1983 3D printable model.
Este modelo 3D representa a Diana , uno de los personajes más emblemáticos de la ciencia ficción televisiva de los años 80. En la serie V (1983), Diana es una de las líderes de los Visitantes, una especie alienígena reptiliana que llega a…
The Dead Zone - 1983 3D printable model. Super easy to print. This is a large model and will take a long time and a lot of material to print.
Este modelo está inspirado en las emblemáticas naves de invasión de una famosa serie de ciencia ficción emitida en 1983, recordada por su estética retro, sus efectos prácticos y su atmósfera de tensión constante. La nave captura la…
1983 Odyssey Fl250 ATV/Go kart
Iconic Movie Villains - Psycho II - Norman Bates - 1983
Videodrome - "Long Live the New Flesh!" - 1983 3D printable model.
Dungeons & Dragons - Lizardman - 1983-1985 3D printable model.
Episode 6 celebrates its 40 th anniversay. 3D printable model for shelfs and cabinets. Share your prints in the Makes section.
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Videodrome - The TV Kiss - 1983 3D printable model.
Diseño El modelo está inspirado en el emblemático Malibu de 1983, destacando sus líneas cuadradas y proporciones características de la década de los 80. Uso Este modelo puede ser utilizado como decoración o en wargames y modelismo,…
Tisk na dvě poloviny s podpěrami, PLA, tryska 0,4, výplň 15%.
The front badge on my old Ranger was all cracked up and looking poorly. I decided to refresh the look of the front grille while installing some new headlights. Aftermarket replacements for this part are hard to find in good condition. If…
The TSR logo that was used from 1983-1991 as a magnet. This uses 3mm x 1.5mm magnets as this is what I had around. Print this up then glue in the magnets and show your a fan. Enjoy! Print instructions Category: Signs & Logos Summary The…
this is my model of the Talbot-Matra Murena S 1983, i hope you enjoy it can print any size, I just made mine small
Air intake to carb boot for DOHC 1983 Yamaha XS400 Maxim. Designed to fit between stock Mikuni BS34 carb and stock air box. Made to use the stock clamp on the carb side. Inside diameter of the carb side is 55mm. Does not include the…
Known for his use of vibrant color, energetic linework and iconic characters like the barking dog, this untitled artwork from Keith Haring in 1983 epitomizes the perfect example of a DJ. Print with any vibrant colors - it will look…
moddled from the pasanger lens will need to mirror if want the other side
Delorean DMC 12 1981-1983 Racing
The gear in this drill broke when we were transferring it and it fell on its side. The original gear was a nylon like material and was probably the relief point in the drills gear case. Unfortunately I don't have a picture of it in the…
Das H0m-Modell zeigt den Wagen 99-01-95 in seiner Funktion als provisorischer Kohletender für die Lokomotive 99 6101 während des Wiederaufbaus der Strecke Straßberg-Stiege im Harz 1983. Es wird angenommen, dass der Wagen Ende des Ersten…
Material: ABS Layer height: 0.2 mm Infill: 15% (Grid) Supports: Tree supports, everywhere Bed adhesion: Brim
Esta figura está inspirada en los emblemáticos lagartos alienígenas de una famosa serie de ciencia ficción emitida en 1983, recordada por su estética reptiliana y su mezcla de intriga, invasión y drama. El diseño recrea la esencia de esos…
Took the original model and scaled it to 8x then added two rare earth magnets from Harbor Freight. The magnets are approximately 8mm x 2mm. There is 0.4mm between the bottom of the fish and the magnets. Magnet Link:…
Take it back to where the noise all started! This 3D display plaque captures the clean, angled block typography of Mötley Crüe's iconic 1981–1983 era logo —complete with the signature umlauts above the 'Ö' and 'Ü'. This model is part of…
IMPORTANT!!: use this at ur own risk it is still not fully tested yet, if the wrong filament use it may melt and break the engine RECOMEND!!: i strongly recommend to have the part 3d printed in metal or anything heat resistance of 180c…
Der Wagen 99-01-95 wurde in den frühen 1920ern von der Südharz-Eisenbahn übernommen und bekam die Nummer 292. Nach dem Zweiten Weltkrieg blieb er im Osten und diente später als Schlackewagen. Heute ist der Wagen bei der Hirzbergbahn…
I have a self-made and specially customized Suzuki GSX Katana from 1983 (year of manufacture). Classicist - of course - directly acknowledge that there are a lot of modification at the motorbike like the engine (GSX1200 with race carbs),…
This is a map of Antescher from ZX Spectrum computer game. It was developed by Sandy White and published by Quicksilva in 1983. This is my tribute to the author. For more details see https://en.wikipedia.org/wiki/Ant_Attack
Support FIRST Robotics Team 1983 Skunk Works at the 2014 National Championship with a 3D printed bow-tie. To wear: Just slip over any normal-sized shirt button and be prepared to be the best dressed at the Championship-watching party.…
Das TTm-Modell zeigt den Wagen 99-01-95 in seiner Funktion als provisorischer Kohletender für die Lokomotive 99 6101 während des Wiederaufbaus der Strecke Straßberg-Stiege im Harz 1983. Es wird angenommen, dass der Wagen Ende des Ersten…
Der Wagen 99-01-95 wurde in den frühen 1920ern von der Südharz-Eisenbahn übernommen und bekam die Nummer 292. Nach dem Zweiten Weltkrieg blieb er im Osten und diente später als Schlackewagen. Heute ist der Wagen bei der Hirzbergbahn…
Tento model je digitální rekonstrukcí suvenýrové "briketky", která byla rozdávána účastníkům a návštěvníkům XI. ročníku Festivalu politické písně v Sokolově, konaného ve dnech 10.–12. 2. 1983. Originál (viz přiložená fotografie) měl…
1983 Yamaha Virago XV500K Gas Tank Damper Bushing Damper, Locating 2 - PN 22U-24182-00-00 No support should be necessary. Use TPU filament for proper application.
Ignition Coil Stand/Display for 1983–1997 Ford 5.0L This stand makes a great display and engagement tool for an automotive repair shop. It can be used to show an old coil versus a new coil. While designed from a 1994 Ford F-150 ignition…
Lego Technic 4198367 Axle Connector Double Flexible TPU replacement
Este modelo 3D representa a Diana , uno de los personajes más emblemáticos de la ciencia ficción televisiva de los años 80. En la serie V (1983), Diana es una de las líderes de los Visitantes, una especie alienígena reptiliana que llega a…
Material: ABS Layer height: 0.2 mm Infill: 15% (Grid) Supports: Tree supports, everywhere Bed adhesion: Brim
The Brute in a Tuxedo, Cast in Malice. This is not a car. This is Britain's answer to Armageddon, cast in hand-beaten steel. The Aston Martin V8 Vantage immortalizes the uncompromising, iron-fisted authority of a gentleman who has…
Support FIRST Robotics Team 1983 Skunk Works at the 2014 National Championship with a 3D printed bow-tie. To wear: Just slip over any normal-sized shirt button and be prepared to be the best dressed at the Championship-watching party.…
A modern recreation of the iconic 1983 Deluxe Uno card tray. This design holds the standard 108-card deck and eliminates the need for support structures while printing. Specifications Capacity: 108 standard Uno cards Material: PLA…
Videodrome - "Long Live the New Flesh!" - 1983 3D printable model.
Tuto součástku již není možné sehnat, tak jsem ji vytvořil. Výtisk z ABS
The Part was printed with Overture TPU - I think PLA Flex is even better.
The Dead Zone - 1983 3D printable model. Super easy to print. This is a large model and will take a long time and a lot of material to print.
Star Wars - Return of the Jedi - Princess Leia - 1983 3D printable model.
A modern recreation of the iconic 1983 Deluxe Uno card tray. This design holds the standard 108-card deck and eliminates the need for support structures while printing. Specifications Capacity: 108 standard Uno cards Material: PLA…
![Foldable Wall Hook (Print in Place) with Snap When Retracted [Remix] by mji1983 on thingyverse](https://media.printables.com/media/prints/488549/images/3987065_8dead286-f540-4a79-bcb5-fdca98ef1f85/asdasdasda.png)
