LayersFactory
Report model
1 / 6
Deluxe Uno Tray - 1983 — image 1
1 / 6

Deluxe Uno Tray - 1983

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Other Toys & Games
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsMakes & commentsRemixesCollectionsRelated

A modern recreation of the iconic 1983 Deluxe Uno card tray. This design holds the standard 108-card deck and eliminates the need for support structures while printing.

Specifications

  • Capacity: 108 standard Uno cards

  • Material: PLA recommended

  • Supports: None required

  • Orientation: Print in the orientation shown in the preview images

  • Layer Height: Variable layer height applied for surface quality and structural integrity

Design Notes

This is a functional redesign of the original 1983 model. The geometry was optimized for FDM printing on a Prusa Core1+ (250 x 220 x 270 mm build volume). The variable layer height strategy was used to balance print time with the aesthetic finish of the tray's curves.

No assembly required. Print and go.

Printing Tips

  • Ensure bed adhesion is sufficient for the base footprint.

  • Standard PLA settings work well; no heated chamber required.

Tags

cardreplacementtrayunoplayingcardscardtraydeluxe