Yamaha Enticer Headlight Bezel - Gen 1 (1978-1983)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bezel is an adaptor between the stock headlight bezel and an aftermarket automotive LED headlight.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 109
- Makes
- 0
- Views
- 983
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The two halves clamshell over an aftermarket LED headlight. It can then be mounted to the stock location using the original hardware.
Printed with supports in PLA. Might recommend PETG for durability.
The design utilizes M3 and M5 heat-set threaded inserts.
https://www.mcmaster.com/94180A333/
https://www.mcmaster.com/94180A361/
It also used 10x M3X10 socket head cap screws. I used stainless.
https://www.mcmaster.com/91292A113/
I used a 4X6 sealed LED headlight from amazon. I imagine other brands would fit as well.
https://www.amazon.ca/BAOLICY-Headlights-Rectangular-Headlight-Approved/dp/B08S79GQ2R?th=1