1 / 6
Yamaha Enticer Headlight Bezel - Gen 1 (1978-1983) — zdjęcie 1
1 / 6

Yamaha Enticer Headlight Bezel - Gen 1 (1978-1983)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This bezel is an adaptor between the stock headlight bezel and an aftermarket automotive LED headlight.

Ocena
0 / 5
Polubienia
3
Pobrania
110
Wydruki
0
Wyświetlenia
991
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

The two halves clamshell over an aftermarket LED headlight. It can then be mounted to the stock location using the original hardware.

 

Printed with supports in PLA. Might recommend PETG for durability.

The design utilizes M3 and M5 heat-set threaded inserts.
https://www.mcmaster.com/94180A333/
https://www.mcmaster.com/94180A361/
 

It also used 10x M3X10 socket head cap screws. I used stainless.
https://www.mcmaster.com/91292A113/

I used a 4X6 sealed LED headlight from amazon. I imagine other brands would fit as well.
https://www.amazon.ca/BAOLICY-Headlights-Rectangular-Headlight-Approved/dp/B08S79GQ2R?th=1

 

Tagi