Counting matching models…
Turn the underside of any table into storage. Screw in a rail, slide in a drawer. MODULITH rails mount under a desk, shelf or enclosure table with a few wood screws. Cases slide on and QuickLock holds them, so you can swap or rearrange…
GEN2 185 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 185 is the STANDARD depth (about 171 mm inside), sized for everyday storage. GEN2 was originally built to mount under a desk · this…
T34-85 USSR tank. The scale is 1:100. Only 2 parts. T-34-85 - the military designation of the latest modification of the Soviet medium tank T-34 with an 85-mm caliber gun. Adopted by the Red Army by GKO Decree No. 5021 of January 23,…
Print it, pull it off the bed, slide it in. One piece, zero assembly. Classic drawers print in one go with the handle built right into the front. No faceplates, no screws, no clips. Pop it off the plate and it is ready to go to work.…
iron man mark 85 helmet please size to your head before printing https://www.thingiverse.com/thing:4607836 link to motorize this helmet you will need some mg90 or sg90 servos the video below this a great video on how to make the helmet…
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
Mark 85 Ironman Inspired Helmet Enjoy Category: 3D Printing
Pick a drawer, then make it yours. The front is up to you. Decor drawers take swappable faceplates and handles, so you can change the look anytime without reprinting the drawer. Print the body in budget filament and save the fancy stuff…
MOUNT GEN2 UNDER ANY TABLE OR DESK GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds…
-Two colors -organic support -0.15 layer height
A simple printable tool to better empty (metal) tubes like tomato paste, mustard and co. Version 2.0 (2023-11-21): I have recreated the " Tubeentleerer " by Boomi and slightly reworked the design, so the dimensions are very similar to the…
I proudly present the Mark 85 Inspired Suit from Avengers End Game. I don't do social media so I'm going to need you guys to share this where its needed. The hand can be found online, maybe someone can link it in the comments. Sized to…
A short flat nozzle for Makita 18V blower DUB185. I made this for drying car/motorcycle after washing, but someone may have another way of use. I made 2 versions that have different opening area (740 mm2, 538 mm2). I'm still testing which…
This is a remix of the Enterprise E model from here: ( https://www.thingiverse.com/thing:599139 ). My example model was printed in 2 big pieces and afterwards painted with acrylic color. Pre- scaled and optimized for prusa printers will…
Update : 7 May 2024 : Added V2.1, 20mm extra length to reach Bambu rear screw rod 14 April 2024 : Added 2 Caps ! V2.0 : A Simple Screw Rods Adapter for the Superlube 21030 Tube Fit all the 8mm OD 2mm spacing rods Easy to print without…
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Filament Drawer is a great way to record and…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This model is compatible with the lego system.
This is a quick N Scale (1:160) model I did of an old house in Chance Harbour, NB, Canada. This model is meant to have inkjet-printed siding and roofing details added, in an experiment to create more detailed models at that small scale.…
This model is compatible with the lego system.
After a few interations this model did well during testing. Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found. For my portafilter the fit is quite snug. If you…
6/1/25: I'm adding a version with no interior (DodgeRamFull) which should be safer for kids. It prints slightly faster as there is less perimeter. The NewDodge version is nicer but when pressing on the cabin (or falling on the floor) it…
A 35mm DIN rail compatible housing to hold a WeMosD1 Mini and a common RS485-to-TTL Adapter. Print instructions Parts 1x 2 Pin KF301 Screw Terminal 1x RS485-to-TTL Adapter 1x WeMos D1 Mini (microUSB Version, ESP8266) 1x 1mm Optic Fiber…
Converted to stl from here: https://www.turbosquid.com/FullPreview/Index.cfm/ID/379862 Category: Props
Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…
This model is compatible with the lego system.
Print parameters: Printer = Bambu Lab P1P Filament = Elegoo blue PLA 1,75 layer hight = 0.2mm Print temp = 210°C Wall loops = 3 honeycomb infill support = NO
similar deflectors are available for sale but not in my country and for a (in my opinion) much to high price so i made some myself. Haven't tested them yet, this is the first prototype. I already found things to change so be warned: this…
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
I accidently broke my feet on my keyboard, Logitech K850. I couldn't find replacement parts so I modeled these using SketchUp and created the STL files for both the 4 and 8 degree feet. Support is needed for the the pin alone.
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Modular System is a 3D printable storage solution…
I consider this a WIP due to how variable my experience with the inkjet print process has been . Please comment with feedback from your experience with the process. Model Info This is designed around standard NFC PVC Cards (54mmx85.5mm).…
AMS Saver - PTFE Cutter - 85mm This tool serves as a convenient aide for accurately trimming the PTFE tube to the specified length required for the AMS Saver. It is designed to adhere to the recommendation of maintaining a tube length of…
This model is compatible with the lego system.
This model is compatible with the lego system.
This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…
Modelo base sin cortes. Si por algun motivo los neumaticos no se imprimen correctamente he subido un archivo independiente para reemplazarlos. Trabajo en un mejor version tipo Kit card
THE GEN2 185 COLLECTION The complete set of GEN2 185 cases · the Standard collection in the GEN2 QuickLock Modular System . At about 171 mm inside, the 185 is the versatile all-rounder for everyday gear. This model includes all 18 cases:…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Looking for MORE upgrades for your enclosure? Consider doing this one!…
Another case to turn a DigiSpark Attiny85 into a (fake) USB stick (or just a nice enclosure, that's up to you ;-) ). This one features a consistent hole, which allows attaching it to a key ring or some kind of tie. There are also two 2 mm…
NEW VERSION: MODULITH 185 GRIDFINITY DECOR DRAWERS These drawers have been redesigned and re-released as part of MODULITH (formerly GEN2). The new page has 12 sizes (1W to 4W in 1H, 1.5H and 2H), a half-grid side channel, optional magnet…
I wanted to have a neat way to display and store my drones on my shelf, but i wanted it to be modular and easy to print. I tried to find something fitting online, but couldn't find anything that really met my expectations, so i hopped…
The Straw on our 30oz / 850ml Stanley cup has a diameter of 9,5mm. The model fits perfectly to our straw. I have printed mine in TPU. Let me know if you have problems or wishes.
Remix with 45-85 deg and 45-70 deg. Category: 3D Printing Tests
The holder is for the “Filter holder”, the 1 and the 2 cup Filter and the “De'Longhi DLSC058 Tamper” but the Plastic Spoon/Tamper also fit. Printed with the Bambu Lab X1 Carbon in 0.16mm with 0.4 Nozzle, with supports. Using Extrudr…
A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…
Treppe für z.b. Playmobil Puppenhaus 70985 Staircase fits for e.g. Playmobil Take Along Dollhouse 70985 Multicolor mit single Noozle - Farben wechsel auf 2,5mm einfügen -→ dann hat der Handlauf eine andere Farbe als die Stiege. → 3mf -…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
BMW Z4 E85 Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…
I needed something for my car so I adjusted and reduced the holder to fit the CZ 75/85 tested directly on the weapon. Can also be used under the table or on the bed. There are two options for right-handed and left-handed.
See https://www.amazon.com/gp/product/B08CHCG42N/ref=ppx_yo_dt_b_search_asin_image
This enclosure is for a ESP32 D1 mini with RS485 modul and fits a DIN rail (one module). It consists of three parts: body, lid and a clip to fix it to the rail (like most devices). Two PCB terminals (2 and three pins) are used to connect…
This model is compatible with the lego system.
Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…
0-85 degree Overhang Calibration Test
I needed a phone stand that could be folded flat for mailing in an envelope, but that also allowed for a nearly 90 degree upright angle, the ability to swipe up from the bottom of the phone without the stand getting in the way, and robust…
All credits to placebo_design for his beautiful and functional design (thingiverse.com/placebo_design/designs). This is a remix of “51mm Funnel for porta filter Delonghi EC680 series” by “Placebo_design” (thingiverse.com/thing:3471204).…
LEGO PART 85861 Plate Round 1 x 1 with Open Stud
Fits international 1kg 850ml (30 oz.) cans Ø=99mm H=119m (Ø=102mm max / H=122mm max). The files provided are only for the left side and need to be mirrored in the slicer for the other side. Print settings: Infill=15% gyroid /Layer…
VQGNS-85 is a modular VR gunstock. It's designed with modularity and repairability in mind. 3D printed pieces are easy and fast to print, and if something breaks - it's a 20-30 minutes fix. The main construction is set around 16mm tubes.…
Printed with PETG, nozzle temp: 240, bed temp: 90, recommend printing with supports so that the axle holes are vertical.
This model is compatible with the lego system.
This is a wall mount for Orbi RBR850 router and RBS850 satellite. The router can also be secured on the mount with two M4x10mm screws. Print instructions Category: Organization Summary This is a wall mount for Orbi RBR850 router and…
A case for the WT32-ETH01 with a RS485 module and USB Type C trigger board for power. The top snaps into the body, no screw needed here. Also needed: TTL to RS485 Converter Module, e.g. https://www.aliexpress.com/item/32853794532.html 5 V…
Great little ducted fan unit I made for an RC project. It is made for a Brushed 8520 motor. On the back of the motor aft core cover, drill a small 1/8" hole for the wires to pass through. I recommend using a 0.2mm nozzle for this print at…
The miter slot on the True-FLEX featherboard didn't fit my dwe7485 so I took the exact dimensions of the crosscut miter that came with the saw and made a compatible miter slot for the board. Uses m6 screw and nut
This adapter is for flash light pewered with 3 pcs of AAA batteries. These torches are cheap and quite common, but problematic and not economical to power. You need three batteries, but they sels in packs of four. If you replace primary…
Small case for the LilyGO T-CAN485 ESP32 board. Top held on by press-fit, bottom can be mounted to something using double-sided tape (don't print on a textured bed if you plan on doing that). Be aware that for CAN and RS485 the DC-DC…
Remix of https://www.thingiverse.com/thing:6060534 so it fits on an E53 X5
Create a robust and budget-friendly stand for your Yamaha P45 piano, especially if the original L-85 is unavailable. Made from 3 pieces of pine, customize the height to suit your needs (e.g., 600mm or ~685mm). Simple assembly using your…
A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…
An enclosure for the lilygo T-CAN485 with visible LED and access to boot and reset buttons. A holder for the enclosure with cable management and a hook to attach the assembly to a Marstek Venus battery.
For Samsung Jet 75/85/90 accessories.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
There are already several models out there; Didn't find one with perfect fit for my DeLonghi model which didn't take forever to print. => On to CAD and made my own. Model number of espresso machine in headline to identify if it fits for…
Indestructible, light, flexible frame with camera and JST-connector mount. There is a hole on the floor to feed the receiver antenna through it. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter…
JERRARI3D.com The GEN2 Series is the next evolution in the most versatile 3D printed drawer system, the GEN2 Modular Storage System . You can now easily swap drawers around thangs to the fully 3d printable QuickLock mechanism design Wait…
Tow hook cover at the front as it is no longer available, a 3D part was made. not quite original but good enough. PETG printed.
This funnel clamps onto the bayonet lock of the portafilter of a DeLonghi Dedica EC685. It prevents loss of coffee during filling and tamping. It is modeled off a third party bottomless portafilter with a slightly looser fit than the…
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Decor Filament Drawer is a great way to record and…
This model is compatible with the lego system.
This is a cat head base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The ears are not included. Having…
Planter for succulent with plastic plant pot (diameter 85mm, height 70mm) I printed on a PRUSA XL: Filament: Filalab Fiber Filament Wood 0,4 mm nozzle 0,20 mm layer 2 perimeters 10% gyroid infill Top and Bottom fill pattern - Concentric…
The popular Dewalt dwe7485 tablesaw has a 2.5" dust port (2.3" ID) that was WAY too big for the 1.5" OD hose I had standard on my ShopVac. Hardware stores didn't have the correct reducing couplers so I designed my own. There is an…
This model is compatible with the lego system.
This is a strong 3d printed electric motor mount for Chinese 885 and 775 12/24v dc motors. PLA 0.4 print nozzle Nozzle temp 210C Bed temp 60C Standard 0.2 layer height 9 hours to print all 4 pieces at standard settings
This 85mm long christmas tree ornament has a very nice slim shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. The cap is made for all XMAS ornaments with a 14mm top.…
The official Cisco part for wall-mounting 8800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
Originally published here: Samsung Galaxy S20+ g985 & g986 case by tato_713 - Thingiverse This case was designed for the Samsung S20+, including the 4G and 5G versions, but not the S20 nor any equivalent phone. Thanks to Thiago Almeida…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
add a standard 52mm gauge to your drivers side AC vent in your Volvo 850!
Goodbye to the limitations of the original 70 mm spool holder for the Prusa CORE One. I've designed this spool holder to accommodate spools from 95 mm to 143 mm in width, giving you the flexibility to use a wider range of filaments /…
little and easy to print clips for filament diameter 1,75 and 2,85 mm ideal as a sample, or for the last meters of a spool smooth curve should avoid breaking the filament in storage Update: i now added new versions “tight” should fit well…
Bmw E30\E28\E21 - door lock knob. OEM: 51 21 1 852 140, 51 41 1 911 964 Almost same with original part, but looks better for me. Perfectly fits on original lock pin. Can be used with the original sleeve. But i recommend to use custom…
cut to fit any 250 x 220 x 220mm or bigger build plate.
