Counting matching models…
Use 2x neodymium magnet diameter 10mm, thickness 2mm. No need glue, just push the magnet into the magnet hole.
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
The original clip broke on my 1986 daytona's blend door cable. So I designed a new one. THERE ARE TWO HALFS THAT MUST BE GLUED TOGETHER! I RECOMMEND PETG. It has been working very well for a few months now.
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Toyota MR2 bonnet badge for First Generation/MK1: W10 (1984–1989). Not for use on vehicle. For display only. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant
Bust of Wonder Woman - Gal Gadot inspired by the second film I hope you like it I also plan to make her complete sculpture Print instructions I recommend the support under her chin and her back
Head skin piece of LUCKY 13 and MINI 13 in Mac (1984). Files: skin_head_mac - Mac machine without “hello.”, printed with no support or support enforce at the back handle part. skin_head_mac_hello - Mac machine with “hello.”, found that it…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
First released in 2016! OCT 2026 UPDATE My sincere apologies to anyone who has downloaded these files since I posted them here in Jan 2026. I originally included an ARCHIVE.zip of old parts for those who might need them. I did not realize…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Replacement pulls to release the rear seatbacks.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Nike Air Jordan ORIGINAL COLOR 1984 Blu
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed the basic dimensions based on the 191 819 707 C or 191 819 719 B (Both are written on the same part), feel free to remix it to fit a gauge for example, sadly the “max” hole size is 45mm but you can probaly get up to 49mm with…
Gizmo Mogwai - a model from "Gremlins" Movie 1984 Printer : Flsun V400 Walls 4; top 4 ; bottom 4 layer height : 0,1 line width : 0,6 scale 100 % infill 35% lightning; no support ; print time ~ 6 h Jayo PLA+ Silk Grey MakerWorld :…
I modeled this awhile back to replace the factory tool box on my 1st gen Kawasaki KLR 650. It's best to print it in ABS so that it can withstand sitting in direct sunlight in the middle of the summer. I don't remember the settings I used,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Originally published in 2016! OCT 2026 UPDATE My sincere apologies to anyone who has downloaded these files since I posted them here in Jan 2026. I originally included an ARCHIVE.zip of old parts for those who might need them. I did not…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Airwolf - Dominic Santini - 1984-1986 3D printable model.
Police Academy - Hightower (Bubba Smith) - 1984 3D printable model.
I decided to make grilles for my 1984 Camaro restoration because reproductions were expensive and a guy on ebay selling 3D printed ones was more expensive than reproductions. To be frank, I did this out of spite lol. I spent a good bit of…
V - Juliette Parrish (Faye Grant) - 1984 3D printable model.
Murder She Wrote - Jessica Fletcher (Angela Lansbury) - 1984-1996 3D printable model.
These are a friction fit, press in mod that requires no permanent modifications to your 1984 hasbro proton pack. They can be a tight fit, so use caution. These files were created using reference from…
1984-1989 Corvette C4 Fuse Box Cover Lock Knob that I made for a friend, based on the original part in SolidWorks.
Troma Films - The Toxic Avenger - 1984 3D printable model.
Police Academy - Cmdt. Mauser - 1984 3D printable model.
Red Dawn - Robert Morris - 1984
By user petition we done this model in Tripo from the image, chest reshaped with Meshmixer mixing with the original logo rebuilt from SVG. Added NO-LOGO version and isolated logo.
Red Dawn - Erica Mason - 1984
This one isn't great, but is still recognizable I think.
This is a custom-made small plug designed to fit the oil fill hole located in the frame of the 1984 Honda QR 50. Based on the original dimensions and appearance, this cap is made to restore the factory look while providing a snug, secure…
The Montgomery 15 sailboat mast has a pre-feeder gate for inserting the mainsail slugs into the mast slot. When the mainsail is dropped, without a mast slot stopper or a mast gate, the slugs will fall out of the pre-feeder slot. If you…
Initial Try, no long term proof jet Dimension: Gear - see picture. Outer Dimensions reduced by 0.2mm Fin - outer length 15mm, height 6mm Zylinder (without gear and fin) - inner diameter 25.1mm , outer 29.6mm, 8.3mm I printed it with PLA…
Printed with supports in PLA. Might recommend PETG for durability. The design utilizes M3 heat-set threaded inserts. https://www.mcmaster.com/94180A333/ The M5 threads are printed. They may need to be cleaned up with a tap. It also used…
speedo gear for 1980s turbo dodge cars
fits my truck idk bout yours, your gonna need to check and make sure it uses the same blade and arm mounts feel free to remix and make it fit whatever i included the .step for y'all to go ham on 7 month update. Don't use PLA as it will…
I made this cup holder since the jeep xj does not have any, which is very annoying for daily use and if you are offroading. This cup holder fits cans and yeti thermos just fine and they wont fall out (unless you role your rig. Keep the…
Fits 1984-1996 Jeep Cherokee. Fitment on 1997-2001 models is not verified, so please measure yourself if that's your application. This floor plug fits the larger holes in the front floor pan on both the driver and passenger side.…
Simple outline of the car
With the new popularity of these being used to run agent harnesses like OpenClaw, thought this would be fun to build. The original design workflow is located on OnShape if you wanted to copy it there and modify it yourself. OnShape:…
About the design This drop plate combines aspects of the B&M plate (circular opening) and various generic drop plates (rectangular opening) resulting in an oblong opening. This approach minimizes the risk of interference when used with…
First released in 2016! TRAP ARCHIVE.ZIP This is for anyone who made a trap before Feb 2022 and needs to reprint old parts - included in download. PARTS Assembly hardware, greeblies, labels and Electronics Guide are available in my shop -…
With the new popularity of these being used to run agent harnesses like OpenClaw, thought this would be fun to build. The original design workflow is located on OnShape if you wanted to copy it there and modify it yourself. OnShape:…
Solifer 1629-5150 S/S1 1984-1996 air filter housing for Suzuki PV50 engine with Mikuni VM12/VM14. Ilmansuodattimen kotelo. Solifer # 1629-5150 (1629-5151+1629-5152)
I made this cup holder since the jeep xj does not have any, which is very annoying for daily use and if you are offroading. This cup holder fits cans and yeti thermos just fine and they wont fall out (unless you role your rig. Keep the…
Bruce "The Boss" Springsteen - Born in the USA - 1984
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm
American license plate frame in 2 parts to fit most printers.
Shermer, Ill. - Class of 1984, Home of the Bulldogs, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
If you want to get this template without subscribing, write me in chat! - SideSilhouette
A rear turn signal stem for the mid 80's honda shadow I printed at 0.3 draft because I don't need one at the moment but I would print at 0.2 anyhow for appearance. Also would print the hardware with rafts and supports The files are 3mf…
Front Door handle seals for MK1 Golf / Caddy / Rabbit. Should be direct fit for 171898201 These are available for purchase https://www.heritagepartscentre.com/eu/171898201-door-handle-seal-set.html but if you prefer to print them…
Replacement Belt for Li'l Playmates Airport toy. Both belts are the same size. Print with TPU. I used Hatchbox TPU 95A. Blender file included. Category: Toy & Game Accessories
Printed in PLA red at my daughters request. Print instructions Category: Construction Toys
Replacement pieces for a strategy/travel board game from 1984. While not many people have heard of it, this is a favourite of ours. Most used copies tend to be missing the original pawns or have broken keys so I decided to print some…
Tool box lid and latch for Honda CB700SC Nighthawk S. Unknown if latch will work with factory lid as i designed this part from the grooves in the airbox and pictures. When printed it fits and works very well. Minor filing on latch…
Reverse engineered a bracket for a friend since the part is hard to find. I recommend printing out of CF nylon, ABS, ASA, PETG, or ABS like resin with a couple of walls.
Children of the Corn - Isaac - 1982 3D printable model. Super simple model to print, adjust size to your needs and you're all set!
Dune - 1984 3D printable model. Super easy to print, adjust to size for your needs and go! This is a very large model, takes a long time and a lot of material to print.
Solifer 1629-5150 S/S1 1984-1996 air filter housing for Suzuki PV50 engine with Mikuni VM12/VM14. Ilmansuodattimen kotelo. Solifer # 1629-5150 (1629-5151+1629-5152)
Beverly Hills Cop - Axel Foley - 1984 3D printable model.
Miami Vice - Crockett, Tubbs, Elvis & Ferrari 365 GTS/4 Daytona Spyder - 1984 3D printable model.
A Nightmare on Elm Street - Freddy Krueger (Robert Englund) - 1984 3D printable model.
Indiana Jones & the Temple of Doom - Indy (Harrison Ford) - 1984 3D printable model.
Ghostbusters - Louis Tully (Rick Moranis) - 1984 3D printable model.
Ghostbusters - Louis Tully (Rick Moranis) - 1984 3D printable model.
Ghostbusters - Peter Venkman (Bill Murray) - 1984 3D printable model.
Ghostbusters - Peter Venkman (Bill Murray) - 1984 3D printable model.
Ghostbusters - Winston Zeddemore (Ernie Hudson) - 1984 3D printable model.
Ghostbusters - Winston Zeddemore (Ernie Hudson) - 1984 3D printable model.
Ghostbusters - Dr. Ray Stantz (Dan Akroyd) - 1984 3D printable model.
Ghostbusters - Dr. Ray Stantz (Dan Akroyd) - 1984 3D printable model.
Ghostbusters - Dr. Egon Spengler (Harold Ramis) - 1984 3D printable model.
Ghostbusters - Dr. Egon Spengler (Harold Ramis) - 1984 3D printable model.
The Terminator - T800 (Arnold Schwarzenegger) - 1984 3D printable model.
The Terminator - Kyle Reese (Michael Biehn) - 1984 3D printable model.
The Terminator - Kyle Reese (Michael Biehn) - 1984 3D printable model.
The Terminator - Sarah Connor-Where it all Started - 1984 3D printable model.
The Transformers - Optimus Prime - 1984 3D printable model.
Remix of MovieMagic's Optimus Prime model
Police Academy - Cary Mahoney (Steve Guttenberg) - 1984 3D printable model.
Police Academy - Cary Mahoney (Steve Guttenberg) - 1984 3D printable model.
Police Academy - Tackleberry (Paul David Graf) - 1984 3D printable model.
Police Academy - Tackleberry (Paul David Graf) - 1984 3D printable model.
![Toyota MR2 SW20 & AW11 [1984-1999] shifter drop plate and solid bushings](https://media.printables.com/media/prints/074e6ccb-05c3-4210-b1fe-f2011dbfe043/images/13103209_6b3a8789-c761-4590-80ef-31ba65bdf120_6fd0e219-6acc-45e9-85bf-59d25a48aa26/img_20260608_142536378_hdr_ae.jpg)
