Yamaha Enticer Headlight Bezel - Gen 2 (1984-1988)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The two halves clamshell over an aftermarket LED headlight. It can then be mounted to the stock location using the origi
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 34
- Makes
- 0
- Views
- 594
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Printed with supports in PLA. Might recommend PETG for durability.
The design utilizes M3 heat-set threaded inserts.
https://www.mcmaster.com/94180A333/
The M5 threads are printed. They may need to be cleaned up with a tap.
It also used 10x M3X10 socket head cap screws. I used stainless.
https://www.mcmaster.com/91292A113/
I used a 4X6 sealed LED headlight from amazon. I imagine other brands would fit as well.
https://www.amazon.ca/BAOLICY-Headlights-Rectangular-Headlight-Approved/dp/B08S79GQ2R?th=1