1 / 4
Yamaha Enticer Headlight Bezel - Gen 2 (1984-1988) — zdjęcie 1
1 / 4

Yamaha Enticer Headlight Bezel - Gen 2 (1984-1988)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The two halves clamshell over an aftermarket LED headlight. It can then be mounted to the stock location using the origi

Ocena
0 / 5
Polubienia
0
Pobrania
34
Wydruki
0
Wyświetlenia
592
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Printed with supports in PLA. Might recommend PETG for durability.

The design utilizes M3 heat-set threaded inserts.
https://www.mcmaster.com/94180A333/

 The M5 threads are printed. They may need to be cleaned up with a tap.

It also used 10x M3X10 socket head cap screws. I used stainless.
https://www.mcmaster.com/91292A113/

I used a 4X6 sealed LED headlight from amazon. I imagine other brands would fit as well.
https://www.amazon.ca/BAOLICY-Headlights-Rectangular-Headlight-Approved/dp/B08S79GQ2R?th=1

Tagi