1984 Honda Shadow vt500c Rear turn signal Stem
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rear turn signal stem for the honda shadow, this was for my 84 honda shadow. I am sure this will fit other years as well
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 46
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
A rear turn signal stem for the mid 80's honda shadow
I printed at 0.3 draft because I don't need one at the moment but I would print at 0.2 anyhow for appearance.
Also would print the hardware with rafts and supports
The files are 3mf but separate for the stem and the fittings
I would also use petg, I have a set of my front signal stems on my bike and they saw some sun this last summer and are holding up nicely.
I have worked on the threads too loosen them a bit but they are not perfect, please feel free to work on them or use a 8mm x 1.75 stud and the nut from the bike.