1 / 1
1984 Honda Shadow vt500c Rear turn signal Stem — zdjęcie 1

1984 Honda Shadow vt500c Rear turn signal Stem

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rear turn signal stem for the honda shadow, this was for my 84 honda shadow. I am sure this will fit other years as well

Ocena
0 / 5
Polubienia
2
Pobrania
46
Wydruki
0
Wyświetlenia
234
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

A rear turn signal stem for the mid 80's honda shadow

I printed at 0.3 draft because I don't need one at the moment but I would print at 0.2 anyhow for appearance. 

Also would print the hardware with rafts and supports

The files are 3mf but separate for the stem and the fittings

I would also use petg, I have a set of my front signal stems on my bike and they saw some sun this last summer and are holding up nicely.

I have worked on the threads too loosen them a bit but they are not perfect, please feel free to work on them or use a 8mm x 1.75 stud and the nut from the bike.

Tagi