Counting matching models…
31. Dec. 2023 V1.3: Simplified the hand model to ease printing Auto 9 for “Universal grip hand” added 30. Dec. 2023 V1.2: New Helmet without visor 29. Dec. 2023: Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Pontiac Fiero Mid-Engine Two Seat Coupe from 1987 was different from previous years due to the “Aeronose” front and rear. This particular body style was never offered from Plastic Model manufacturers. Since I own one of these cars I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Welcome to my first fully CAD designed 3D printable movie prop project - the grenade from the infamous scene in Robocop (1987) as used by Clarence Boddicker. If you have the capacity to do so, I recommend printing all parts in ABS as it…
⚫ Sonic Screwdriver 7th Doctor ⚫ It's finally here. Another sonic screwdriver this time from the Seventh Doctor. More sonic screwdrivers coming soon! ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶 Layer height:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
Description LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment Inner peace doesn’t pay for pizza night! There are…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. I also added two holes of approximately 11mm by 1mm on the base so you can attach a neodymium magnets.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This was captured using a Revopoint Mini on a broken OEM trim piece and then repaired using Cloudcompare and Meshlab by cloning the opposite side and mirroring it to recreate the broken section. I created this for another individual and…
Married with Children - Buck Bundy - 1987-1997 3D printable model.
Dirty Dancing - Johnny Castle - 1987
This model has not been test fitted yet, I will update here when it is but side-by-side looks promising. Captured using a Revopoint Mini, the STL uploaded is significantly lower resolution as the scanned file was half a gig and didn't…
Hello Everyone, I have designed this Cabin for my friend thomas_peat (you should definitely check out his instagram page @thomas_peat). It was designed for the RC4WD Toyota XtraCab 1987 Hardbody. The design has a "complete" version to…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶 Layer height:…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶 Layer height:…
Print Settings Material: Polymaker CoPA or any other Nylon (Annealing is recommended) Infill: 20% Supports: Tree supports on Build Plate Only Nozzle: I used a 0.2 Nozzle for this, 0.4 may work as well but it's a pretty small model so I…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶 Layer height:…
Married with Children - Bud Bundy (David Faustino) - 1987-1997 3D printable model.
The Running Man - Amber Mendez (María Conchita Alonso) - 1987 3D printable model.
The Running Man - 1987 3D printable model. Super easy to print. This is a large model and will take a long time and a lot of material to print.
21 Jump Street - Officer Judy Hoffs (Holly Robinson Peete) - 1987-1991 3D printable model.
The european version was almost correct except for the top piece which obscured more of the character picture than was ideal. So I remodeled the top piece in freecad, and slightly modified the bottom piece. Ive included the STLs and…
Center latch was broken on my '87 XJ before I bought it . Designed this one off of pictures online and the pieces left. Here's another option: 84-96 Jeep Cherokee Center Console Latch by Josh Nez I haven't used this model but this…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
The Running Man - Fireball - 1987 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
21 Jump Street - Officer Dennis Booker (Richard Grieco) - 1987-1991 3D printable model.
21 Jump Street - Officer Tom Hanson (Johnny Depp) & Officer Doug Penhall (Peter DeLuise) - 1987-1991 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
21 Jump Street - Officer Tom Hanson (Johnny Depp) - 1987-1991 3D printable model.
The Highwayman - Dawn - 1987-1988 3D printable model.
I have created rotors for the G.I. Joe 1987 Cobra Mamba Helicopter. They can be printed as a single piece, but due to their size, I have also uploaded the piece in three parts that can be easily joined together using a dovetail joint.
The Cosby Show - Sondra Huxtable-Tibideaux (Sabrina Le Beauf) - 1987-1990 3D printable model.
Near Dark - Jesse Hooker (Lance Henriksen) - 1987 3D printable model.
The Highwayman - High Tech Aérospatiale SA 341 Truck - 1987-1988 3D printable model.
Mitsubishi Pajero 1987 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
The Cosby Show - Rudith Lillian Rudy Huxtable (Keshia Knight Pulliam) - 1987-1990 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Cosby Show - Dr. Heathcliff Cliff Huxtable (Bill Cosby) - 1987-1990 3D printable model.
The Cosby Show - Denise Huxtable-Kendall (Lisa Bonet) - 1987-1990 3D printable model.
A replacement throttle cable cover for the 1987-97 Ford F-series and Bronco. It should fit 5.0l and 5.8l engines. Print it in at least ABS.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
21 Jump Street - Officer Harry Truman Ioki (Dustin Nguyen) - 1987-1991 3D printable model.
The Cosby Show - Claire Olivia Hanks-Huxtable (Phylicia Rashād) - 1987-1990 3D printable model.
Prince of Darkness 3D printable model. Prints in two pieces. The large collage piece, and the name plaque. This is a very large model and takes a long time and a lot of material to print.
Part has been tested on an 87 Hardbody and appears to work well. Built with OpenSCAD, file included if you need to make any adjustments. Print Settings: Supports: Touching Buildplate Infill: 100%
The Cosby Show - Theodore Aloysius Theo Huxtable (Malcolm-Jamal Warner) - 1987-1990 3D printable model.
Hi ive added the screw lid from the original creator
This is a cool tile inspired by @marina_113052 other haring heart design. I used multilateral painting by layer height for the four color design using my MK4S and MMU3. I printed with 0.4 Nozzle at 0.2 layer height, speed setting using…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Highwayman - Highwayman - 1987-1988 3D printable model.
Iconic Movie Villains - Wallstreet - Gordon Gecko - 1987
Lancia Delta HF integrale 1987-1994 Racing
Buddy wanted to replace OEM cassette deck with a CAMECHO Android head unit, but couldn't find any aftermarket bezels with snug fit while keeping head unit display centered within original dash molding, so I designed one. STL Flavors: 45…
This is a third brake light assembly I designed around a cob led strip light to replace the dated OEM light. I tossed mine when I stripped my interior and wanted to design my own so here's what I came up with. I printed this in ABS CF as…
Honda Monkey plastic parts for light switches. Years around 1987 - 1989. Category: Hobby
Since my first published keybboard was The1987 (https://www.printables.com/model/299777-the1987-a-modular-retro-inspired-87-key-mechanical) and it's fairly popular, and its designed around the Phantom circuit board and Teensy 2.0, which…
Needed a cake topper for my wife's birthday, Vintage 1987. Printed with two colors on single extruder with post processing Gcode in cura. Extensions>Post Processing>Modify G-Code Add a script>Pause at height – Change Pause at: to “layer…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Noir Transmission Distance: 3 PLA Inco Rouge Transmission Distance: 3.8 PLA Kingroon Blanc Transmission Distance: 4.5 PLA Kingroon…
UPDATE 25APR2026: V2 files added. Widened the cradle areas on the support piece to allow the saucer section to rest further into the nook. Added a slight tilt to the support and base design so that the bow of ship points up slightly.…
If you do not own an old 1978-1987 (or thereabouts) GM G-body car, this model isn't for you. The lower stereo mount tabs on these cars are very fragile, and especially if you have been in and out of that area many times, or replaced the…
Hole cover tachometer engine XR XLS 125 1979-1987 Honda
Step back into the wild nights of sunset strip rock! This 3D display plaque captures the distinctive tall, gothic-influenced typography of Mötley Crüe's iconic 1987–1989 era logo —complete with the signature extended letter tails on the…
I made these Trunion spacers for a 1951 Chevy tailgate, but should work up to 1987 and possibly later years.
Did not work well with PLA in the summer. Maybe ABS or PETG would be a better option. I ended up ordering the real part. Uses 2x springs. I believe that I cut down pen springs, but I cannot remember.
drive roller for microwave Toshiba ER-7600 (from year 1987) How I Designed This Just took mesures of the broken part Category: Replacement Parts
Tento model je digitální rekonstrukcí plechového přívěsku ze XIV. ročníku Festivalu politické písně v Sokolově , konaného v roce 1987. Kovový přívěsek sloužil jako suvenýr a zároveň symbol ideově laděného kulturního podniku konce…
