1 / 3
Hood Prop Clip for 1987 Nissan D21 Hardbody
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hood retainer clip for a 1987 Nissan D21 Hardbody, may work for newer models as well
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 116
- Makes
- 1
- Views
- 381
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Print Settings
Material: Polymaker CoPA or any other Nylon (Annealing is recommended)
Infill: 20%
Supports: Tree supports on Build Plate Only
Nozzle: I used a 0.2 Nozzle for this, 0.4 may work as well but it's a pretty small model so I went to the 0.2.
Support Removal
The tree supports would be fairly easy to clip off using your flush cutters, however an x-acto knife or similar razor blade can be helpful to clean up after removing the tree supports.