1 / 3
Hood Prop Clip for 1987 Nissan D21 Hardbody
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hood retainer clip for a 1987 Nissan D21 Hardbody, may work for newer models as well
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (17)Powiązane
Print Settings
Material: Polymaker CoPA or any other Nylon (Annealing is recommended)
Infill: 20%
Supports: Tree supports on Build Plate Only
Nozzle: I used a 0.2 Nozzle for this, 0.4 may work as well but it's a pretty small model so I went to the 0.2.
Support Removal
The tree supports would be fairly easy to clip off using your flush cutters, however an x-acto knife or similar razor blade can be helpful to clean up after removing the tree supports.