Liczymy pasujące modele…
This design is based on spacing points as equally as possible on a sphere (using charge-like relaxation optimization) and then cutting planar slices perpendicular to those directions. This make fairest as possible dice for any number…
Made for bolts, as you probably won't find clips anymore. Mirror for left / right orientation. Barely fits on an Ender 3, but you can make it work. ;)
DS-2CD2146 (diameter 121.4 mm) https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Pro-Series-EasyIP-/ds-2cd2146g2-i-su-/?q=ds-2cd2146g2-i&pageNum=1&position=1&hiksearch=true Other material: Camera mounting screws 3pcs…
The Gauge Cluster/pod replaces the center vent in the dash of a Nissan D21 with the square dash 1990ish. no supports needed for cluster body. I used tree supports on the retainers. print two. I needed four gauges. designed to fit the…
This was captured using a Revopoint Mini on a broken OEM trim piece and then repaired using Cloudcompare and Meshlab by cloning the opposite side and mirroring it to recreate the broken section. I created this for another individual and…
This is a scale model of the Seeed Studio XIAO SAMD21, a ATSAMD21G18A-MU board with various useful functionality and costs $5.40. The product page for this device can be found here . It is intended for makers building electronics to…
This is a really great project that was created by talented people on the Neo - Arcadia forum. Victim of their success, unfortunately we can no longer order "for the moment" the complete frame kits to manufacture the project. In the…
This model has not been test fitted yet, I will update here when it is but side-by-side looks promising. Captured using a Revopoint Mini, the STL uploaded is significantly lower resolution as the scanned file was half a gig and didn't…
Seeed Studio XIAO SAMD21 powered by Microchip SAMD21G18 chip is an ultra-small, high-performance universal development board, the pioneering product of the XIAO series. It supports Arduino / Micropython / CircuitPython development, which…
Simple model for mounting your Brother PTD210 on the SKADIS mounting system from IKEA. Prints upright, without supports.
Print Settings Material: Polymaker CoPA or any other Nylon (Annealing is recommended) Infill: 20% Supports: Tree supports on Build Plate Only Nozzle: I used a 0.2 Nozzle for this, 0.4 may work as well but it's a pretty small model so I…
These clips harden with age, and mine finally broke in a hailstorm. I couldn't find them new, , and expect used ones from the junkyard will already be brittle. So I designed new ones! They're not intended to be an exact reproduction,…
Remixed https://www.thingiverse.com/thing:5240932 for mounting in my RV. Removed material, added zip tie holes (as RVs move). Note that you may need to insert the modem to a side as this model mounts close to the wall. Mine is placed in…
Used the 3d scan provided by the original to make a cupholder version.
Stand for perplexus with diameter ~210 mm, with 125 points. I glued self-adhesive felt into each of the four corners as a protector for the ball as proposed in the original post.
Hikvision base, one tilted by 14°, one normal. With hole for a PG16 grommet for ethernet cable. Included small grommet/end cap for microphone cable, if you have "-IS" version. A low ring is for testing. Layer 0.25mm, Nozzle 0.4mm, Infill…
Part has been tested on an 87 Hardbody and appears to work well. Built with OpenSCAD, file included if you need to make any adjustments. Print Settings: Supports: Touching Buildplate Infill: 100%
The Tube Top Plug Cab broke from my Cannondale Lefty, so I decided to print instead of rebuying it. I printed it in PLA within 0.1 mm with a Core One for the smoothest experience. PETG works also. Also, I reused the existing O ring; no…
This is a lid for the T-Mobile home internet KVD21 which adds an 80mm fan, and slots for 4 router antennas or external MIMO antenna, I wasn't getting the best reliability with the factory setup because I live in a rural area, after seeing…
The Fokker D.XXI fighter was designed in 1935 by Dutch aircraft manufacturer Fokker. The D.XXI was designed as an inexpensive, rugged, and compact fighter aircraft that would possess respectable performance for its era. Entering…
virtjoule model B08LQTD21D is a set of five heat insert tips (M2 through M5) compatible with Weller WES51 irons (i.e. Weller ET-series tips) available on Amazon. However, they come in what looks to be a very basic 3d printed container.…
The enclosure supports the 020123 (v2) of the SEEED XIAO SAMD21 LoRa + FRAM PCB, as designed by StuartProjects. I have no money interest, but you can buy the PCB here: https://www.tindie.com/products/29426/ The documentation, software etc…
Optional: Transfer the Stock LED Lights You can reuse the two LED lights from the original base if you’d like: Remove the two screws on the stock base. Unsolder the four wires from the control board and unthread them out. Feed the wires…
It's not perfect but it works Use PETG and supports
all D and F series Parts are compatible
Wall mount corner bracket for HIK VISION Camera DS-2CD2183G2-IS, but will probably fit other models too. Check holes before use. I installed heat-set threaded inserts in the holes. Print Settings : I printed it with ASA material for its…
Standard factory mount for this lamp is so bad - so i made that GoPro type mount PETG - recommended (due to outdoor environment) My design GoPro Mount Used: https://www.thingiverse.com/thing:3515125 GoPro Base designed bymark133:…
all D and F series are compatible
To protect the microscope objective Category: Gadgets
Portable radio stand Printed from PLA, 0.20mm, without supports. Cat image: Cat book stand Author: @Razzer09
A box for the XIAO SAMD21 + BetaFPF ELRS SuperD receiver
This replaces the power button on our Splendide 2100XC washing maching, but may work for other Splendide models as well. Print Settings Printer Brand: Creality Printer: LD-001 Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 25%…
Desk organizer for Brother's P-Touch, PTD210 and PTD220 label makers. It comes with attached and detached label storage. The label maker is fully functional within the holder and it is easy to remove using the slit in the back. The design…
Print Settings: Primeters 4, 20% infill Material: PETG The Inserts on these models are rotated to match a improperly installed HCW like mine seen in the photos.
Brackets for convenient mounting of the Noctua NH-L12S to FCBGA 2518 sockets. Created and tested for the Supermicro X11SDV-4C-TLN2F motherboard. You must print two - left & right are identical. You must use ABS or PC for print. DON'T USE…
A quick fan shroud IU made for the Asrock D2143D8UM / Datto S4P2143. There are 2 models included. One is for an 80mm fan, the other is for a 60mm fan. The body of both shrouds is the same, it's just the fan mounting that is different.…
I couldn't find this pins for propping the glove box so I made them. Fits: 1994-1997 Nissan Hardbody Pickup D21 Glove Box Stops Pins 94 95 Pathfinder Might want to make them with some more durable or softer filament TPU/ABS. I made them…
Are you also completely disturbed by those non-interchangeable sizes of dust extraction hoses? Nothing fits nothing. I'm done with adjusting regular PVC pipes on the lathe and fixing things with duct tape, so I've made these adapters.…
