Digital Microscope Andonstar AD210 - Microphone Arm Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your AD210 Digital Microscope to a microphone arm stand using this custom adapter, designed for the standard 3/8-1
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Optional: Transfer the Stock LED Lights
You can reuse the two LED lights from the original base if you’d like:
Remove the two screws on the stock base.
Unsolder the four wires from the control board and unthread them out.
Feed the wires through the two holes in this printed model to the rear of the control board.
Reinstall everything in reverse order.
Tip: The control board should fit snugly. If it’s tight, use a small pick through the grounding holes to help guide it in.
Model Variations
There are four versions of this adapter to suit your preferred mounting style:
Split Clamp (with Heat Inserts) — Recommended
2 × M3 heat inserts
2 × M3 screws (16 mm–20 mm length)
Allows the microscope to rotate more freely.
Split Clamp
2 × M3 screws
Simpler design, still secure.
Retaining Screw (with Heat Inserts)
2 × M6 heat inserts
Reuse the two stock base screws (they have plastic tips to protect the microscope).
Retaining Screw
No additional hardware required.
Tip: Tap out the holes with a standard M6 screw first to make threading the thumb screws easier.