106 models
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Battery tray bottom for 1982-1992 Camaro and Firebird with battery on Passenger side.
Print approx. €10.00–€12.22 excl. taxPreliminary estimate for one variant
This is Wheel Hub Centric Rings Front and Rear for all 1982-1992 Camaro and Firebirds that are using Corvette Rally Wheels. These should fit original and aftermarket rally wheels. Printed on a Prusa Mk3s+ machine in ABS with fan disabled…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
Gas tank spacers for the 1992 Ducati 851 and all 1993+ 888 motorcycles. These spacers allow the gas tank to be raised either 3.5 or 4mm, to clear the frame mounting bracket for an Ohlins steering damper. Spacers are placed between the…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed the basic dimensions based on the 191 819 707 C or 191 819 719 B (Both are written on the same part), feel free to remix it to fit a gauge for example, sadly the “max” hole size is 45mm but you can probaly get up to 49mm with…
Remixed design by MB96 to be smaller, print faster with less material, and allow removal of the unit for easy battery replacement or on failure (I've had 1 out of 10 fail so far with a bad display). I used both hot glue and contact cement…
This is a highly detailed 3D printable model of the 1992 Ford Crown Victoria , a classic full-size American sedan known for its iconic boxy design and legendary durability. The model is designed for 3D printing enthusiasts, collectors,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Edit 05/01/25: Fixed model issues with the logo not being connected to the frame Added a print Profile
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.
Bram Stoker's Dracula - Count Dracula Old - 1992 3D printable model.
This is a Sketchfab converted model, it is a 1997 Asia towner, however I have customized two and made both a Towner and a 1992 Daihatsu Hijet, I hope you enjoy! Link to original model: Asia Towner / Daihatsu HiJet - Download Free 3D model…
Front Door handle seals for MK1 Golf / Caddy / Rabbit. Should be direct fit for 171898201 These are available for purchase https://www.heritagepartscentre.com/eu/171898201-door-handle-seal-set.html but if you prefer to print them…
Bram Stoker's Dracula - Abraham Van Helsing (Anthony Hopkins) - 1992 3D printable model.
Unforgiven - Ned Logan (Morgan Freeman) - 1992 3D printable model.
MacGyver - Peter Pete Thornton - 1985-1992
Candyman 3D printable model. Easy to print, just adjust size to your needs and go!
GM / Chevrolet 1992-2020 Multi-Purpose Retainer (Part number: #22600404) for cargo / convenience nets, etc. I created this model to replace a missing cargo net hook for a Chevrolet C7 Corvette. Given the GM part number, it should be…
I needed a rubber bumper for my OBS F350 hood so I copied one. I printed with Overture TPU with 3 walls and 15% cubic infill. It was a little soft so I would probably try 4 walls and 20% infill. 6 walls and 25% was too much.
Sister Act - Whoopi Goldberg - 1992 3D printable model.
MacGyver - Penny Parker - 1985-1992
Curro was the Expo pet in Sevilla in 1992. It was an important pet inside Spain and at least two generations has grown with keychains and T-Shirts of Curro. Print Settings Printer: bq Prusa 3 Hephestos Category: Signs & Logos
The Mighty Ducks - Emilio and the Gang - 1992 3D printable model
Sleepwalkers - Charles Brady Bust - 1992 3D printable model.
A lovely printable model of a 1992 Saturn SL2, one of my personal favorite cars. I remember seeing these when I was younger, and it brings me fond memories, so please enjoy this model!
Volkswagen Golf MK3 GTI 1992
Volkswagen Golf MK3 GTI 1992 Caricature
Lose one of the track supports for your old Criss Cross Crash set? No worries! Just print one!
Lose one or more of the track connectors for your old Criss Cross Crash set? Put away that tape and print yourself some replacements! I believe they also work with Turbo Trax sets as well but I'm unable to test that. I tried to replicate…
ACHTUNG: Es gibt ein Update für dieses Modell, bei dem der Aufbau der Elektronik durch die Verwendung einer Platine vereinfacht wurde und weitere Verbesserungen vorgenommen wurden. ATTENTION: There is an update for this model that…
this is a 3d scan of a 1992 f350. I grabbed this to make a bumper for my buddies truck and figured it might have some use to other people. Have fun! If you make or design something cool, share some pics or screenshots I wanna see what…
Honda NSX-R 1992 The first-generation Honda NSX-R joins my Moving Wheels collection! Designed for FDM printing, this model features freely rotating wheels, separate rims, flexible tires and center caps with the Honda “H” emblem. Available…
When life takes your doohickey, you clone a doohickey… to make super-doohickeys. Must be printed or painted green. If not, other Viper owners will point at you and laugh. And you know what? They're right to do so. From…
The Hertz CP 26 tweeters were the closest I could find to the stock tweeters. Here's an adapter. You will also need an M3 screw that's 12mm in length. Link to OnShape model:…
These work well on the 1992 Ford Taurus - Your mileage may vary. You will need both v1 and v2 as both are subtly different on the top and bottom part of the vent. The files called 'nubholder' are for the back of the vent. Print these as…
Das ist die NEUE Version des C8 Stick-Focuser! Alte Version: https://www.printables.com/model/971030-celestron-c8-1992-stick-focuser Vorab: Das ist kein Projekt für Anfängerinnen und Anfänger. Hinreichende Kenntnisse im Löten und…
So my veins in my vents decoupled and the piece that held them together disintegrated. Maybe this will be useful for someone else who has this same car.
special scalloped scale pattern for superior grippiness, first attempt at custom fitment for the fireblade, parametric generator and more to come
designed for Honda NSX type R 1992-1995 Racing
Knife model for 1992 stanley razor blade
Mazda RX-7 FD 1992-2002 Racing
Ford Escort RS Cosworth 1992 Caricature
Cobi was the pet of the olympic games in 1992 in Barcelona, Spain. Print Settings Printer: Prusa bq Hephestos Supports: No Category: Signs & Logos
Toronto Blue Jays 1993 World Champions plaque
Replacement part for a 1992-1999 BMW Window Regulator Slider Clip REPOSTED!!! Category: Automotive
On my 93 antenna car, the giant antenna gets in the way of the car cover. I managed to find a Metra 44-STUB antenna that comes with the elusive female 1/4-20 to male 6mm adapter. After installing it, it looked funny. The base, adapter,…
Replaces ‘flaps’ that cover letters in this 1992 TYCO game. More and more flaps broke as we played! Printed lots of extras to go in the game box. Tab at top did not print out on my machine, but is not needed. Did you guess the phrase for…
Missile for the Transformers 1992 Megatron tank. Printed horizontally with supports in PETG. Might need some sanding in order to shoot out smoothly.
Is the frame number cover / VIN hatch missing on your classic Aprilia SR50 Old (first generation, manufactured from 1992 to 1997)? Since these original plastic parts are virtually impossible to find or often broken, I 3D-modeled a custom…
Replacement exterior side trim clip for the Mazda RX-7 FC3S (1986–1992). These small plastic clips hold the exterior body side trim strips to the doors and body panels. The originals are now 38+ years old, discontinued from Mazda, and…
Tailgate panel trim designed for the 1992–1996 OBS Ford Truck. This set includes three versions: Blank Tailgate Panel Trim – no logo cutout 7in Ford Oval Tailgate Panel Trim – fits the larger 7" Ford oval 4in Ford Oval Tailgate Panel Trim…
Plugs the bulb opening in the back of the OBS Ford composite headlight housing while the bulb is out. Use it to keep dust, moisture and bugs out during storage, or to seal the housing while you clean or restore it. It twists in like the…
We have a 1992 Toyota Coaster (HZB31) which has very low profile speakers mounted on the ceiling. These brackets are slightly bigger to accommodate a 5.25" speaker (in this case a Polk DB522). Requires some M3 threaded inserts and M3x6 or…
Batman bust from Worlds Collide to be printed in one piece. Print settings below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Busto de Batman de Worlds Collide a…
Replaces Subaru oem 92183 cap coin tray with a flat alternative that replaces the indents with a flat panel that stops dirt and dust from lingering in it.
Gas tank spacers for the 1992 Ducati 851 and all 1993+ 888 motorcycles. These spacers allow the gas tank to be raised either 3.5 or 4mm, to clear the frame mounting bracket for an Ohlins steering damper. Spacers are placed between the…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Hey all, I needed some seat pulls for my rear bench seat on my Suzuki Alto Works as the old ones were broken. Will likely work for other models if you want to remix it.
This was the least-terrible idea I could come up with. Reasons why I decided on this location: 1) I didn't like the cigar lighter mounts because the GPS is too low. Also if you knocked it with your hand you would probably damage the cigar…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
If you want to get this template without subscribing, write me in chat! - SideSilhouette
Check out this utility knife I designed for the Stanley 1992 blade! Featuring a magnetic cap, ergonomic design, and holes for hanging or fidgeting, it's perfect for daily use. Magnet size: 6mm diameter, 1.2 mm height Blade is secured in…
We have a 1992 Toyota Coaster (HZB31) which has very low profile speakers mounted on the ceiling. These brackets are slightly bigger to accommodate a 5.25" speaker (in this case a Polk DB522). Requires some M3 threaded inserts and M3x6 or…
I designed this model in Fusion inspired by the early 90's Formula 1 race cars. The scale is consistent with the Matchbox Formula racer casting from the 90s and the Hot Wheels Grand Prix Racer of the early 2000's. You may use a 1/16th…
Jedná se o náhradní krytku baterie pro dálkové ovládání starého RC auta – formule Fisher Price z roku 1992 . Krytka slouží k bezpečnému zakrytí prostoru pro baterie a nahrazuje původní, často ztracený nebo poškozený díl. Model je vytištěn…
Batman bust from Worlds Collide to be printed in one piece. Print settings below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Busto de Batman de Worlds Collide a…
Print out of ASA, at a minimum print it out of PETG
Evil Dead Ash model. Super easy to print, just size it to whatever you need and you're good to go!
Reservoir Dogs - Mr. Pink & Mr. White - 1992 3D printable model.
Batman Returns - Penguin (Danny DeVito) - 1992 3D printable model.
Batman Returns - Catwoman (Michelle Pfeiffer) - 1992 3D printable model.
Sleepwalkers - Mary Brady (Alice Krige) - 1992 3D printable model.
Unforgiven - English Bob (Richard Harrison) - 1992 3D printable model.
Unforgiven - English Bob (Richard Harrison) - 1992 3D printable model.
Unforgiven - Will Munny (Clint Eastwood) - 1992 3D printable model.
Unforgiven - Ned Logan (Morgan Freeman) - 1992 3D printable model.
Unforgiven - Little Bill (Gene Hackman) - 1992 3D printable model.
Unforgiven - Little Bill (Gene Hackman) - 1992 3D printable model.
Universal Soldier - Jean-Claude Van Damme & Dolph Lundgren - 1992 3D printable model.
Universal Soldier - Jean-Claude Van Damme & Dolph Lundgren - 1992 3D printable model.
Bram Stoker's Dracula - Mina Harper (Winona Ryder) - 1992 3D printable model.
Bram Stoker's Dracula - Jonathan Harker (Keanu Reeves) - 1992 3D printable model.
Bram Stoker's Dracula - Abraham Van Helsing (Anthony Hopkins) - 1992 3D printable model.
Replacement coin entry funnel for the Imonex coin mechanism as installed on Skee-Ball Inc. Model S arcade game. This replacement attaches using the existing screw hole on the front face of the Imonex mech, no drilling required. The…
Batman - Suit Collection - Batman Returns - 1992 3D printable model.
Hey all, I needed some seat pulls for my rear bench seat on my Suzuki Alto Works as the old ones were broken. Will likely work for other models if you want to remix it.
A seal or plug for the front inner fender. These may be used elsewhere as well. Ex: the trunk area on a gen 1 Viper. Should fit years 1992-2017. Print with TPU and at least 40% infill. OnShape link if you wish to tweak the measurements:…
