1 / 13
aHonda NSX-R 1992 – Moving Wheels – 1:18 / 1:24 / 1:64 — image 1
1 / 13

aHonda NSX-R 1992 – Moving Wheels – 1:18 / 1:24 / 1:64

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1992 Honda NSX-R with moving wheels, separate rims, TPU tires and center caps. Includes 1:18, 1:24 and 1:64.

Rating
0 / 5
Likes
11
Downloads
74
Makes
0
Views
337
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Standard Digital File License

Honda NSX-R 1992

The first-generation Honda NSX-R joins my Moving Wheels collection!

Designed for FDM printing, this model features freely rotating wheels, separate rims, flexible tires and center caps with the Honda “H” emblem.

Available in 1:18, 1:24 and 1:64. The body prints as one piece with closed doors, hood, trunk and windows, without an interior.

Print and fit checks

The files have been digitally checked for mesh integrity, wheel clearance and screw-head clearance.

Printer tolerances and materials can affect the fit. Before printing a complete set, test one front and one rear wheel assembly with your chosen screws.

Included files

Each scale includes:

  • Body: one STL containing the complete body.

  • Tires: one STL containing four tires.

  • Rims: one STL containing four rims.

  • Center caps: one STL containing four caps.

There are 12 model STL files across the three scales. Print each file once to obtain a complete car.

Model features

  • Freely rotating wheels secured with screws.

  • Separate front and rear wheels with different dimensions.

  • Flexible TPU tires and rigid rims.

  • Smooth wheel-well interiors.

  • Integrated transverse axle sleeves with conical ends.

  • Recessed screw heads concealed by center caps.

  • Embossed Honda “H” emblems on the center caps.

  • Additional tire-retaining flanges on both rim edges in the 1:18 and 1:64 versions.

Required screws

Four screws are needed for each model:

  • 1:18: 4 × M3 × 12 mm.

  • 1:24: 4 × M2 × 10 mm.

  • 1:64: 4 × M1.6 × 6 mm.

Use cylindrical-head screws that fit the wheel recesses.

Wheel assembly

  1. Print the body, rims and center caps in PLA or PETG, and the tires in flexible TPU.

  2. Match the front and rear tires to the corresponding rims.

  3. Fit the tires onto the rims.

  4. Attach the wheels to the body using the appropriate screws.

  5. Tighten gradually, leaving the wheels free to rotate.

  6. Check that the screw heads are fully recessed, then fit the center caps.

Avoid overtightening the screws, as this can prevent the wheels from turning.

Recommended print orientation

  • Body: flat floor on the build plate.

  • Rims: inner side on the build plate, outer face pointing upward.

  • Center caps: flat inner face on the build plate, emblem upward.

  • Tires: use the supplied orientation.

The files are already oriented for printing.

Suggested FDM settings

  • Body, rims and caps: PLA or PETG.

  • Tires: TPU 85A recommended.

  • Nozzle: 0.4 mm.

  • Layer height for 1:18 and 1:24: 0.12–0.16 mm.

  • Layer height for 1:64: 0.08–0.10 mm.

  • Supports: organic/tree supports where needed for the body. Inspect the mirrors, spoiler, bumpers and wheel arches in the slicer.

  • Keep mounting holes and center-cap recesses clear of supports.

The 1:64 version has small, delicate details, so remove supports carefully around the mirrors and rear spoiler.

Tags