1177 modeli
Wall mount for the 20V DCF840 DeWalt Impact Driver. I started with Slavish's design for a 12V Impact Driver mount and modified as needed. Thanks to Slavish for a place to start and a great idea. See the following link for a similar mount…
Wydruk około 6,85 €–8,37 € nettoWstępna wycena jednego wariantu
Ein selbst erstellter Nachbau des VW Halteclip für Tachowelle / Haubenzug / Bremsleitung / Scheibenwischer Volkswagen Halteclip für : Scirocco 1977 - 1992 Golf 1977 - 1984 Jetta 1979 - 1984 Passat 1981 - 1988 Polo / Derby 1982 - 1994 Bus…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Bonsai pot 27 round literati 84x84x57mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
A 90x90x28mm box mainly designed to hold my TI-84+ (or most graphing calculators) on my Ikea Skadis system.
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
Kitchen Stove Knob model is based on @Weedjesus_350271 CAD file and modified for W10844787. I printed it in PLA in Prusament Galaxy Gray
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
Universal Cross Base / Replacement for Princess Stand Fan 355840 Rigid ribbed cross base, replacement for broken pedestal fan feet. Eliminates the original clip-hinge weak point. M5 tapped holes, axial load. 210mm span, freestanding…
Wydruk około 4,52 €–5,53 € nettoWstępna wycena jednego wariantu
A wrench for fridge water filters Bosch Ultra Clarity 644845, REPLFLTR10, 740560, AP3962558; Haier 0060820860, RF-2800-13, RF-2800-15, Rangemaster DXD 90170; Bypass Cartridge. Print instructions Print using at least 15% infill in PLA,…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu
Beschreibung Das Modell der ehemaligen katholischen Kirche „Zum kostbaren Blut“ (Rheinstraße 8, 35684 Dillenburg – Frohnhausen) ist das fünfte einer Reihe von Modellen profanierter, umgebauter, umgewidmeter oder abgerissener Kirchen der…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Lord of the Ring - The One Ring dice bowl by Skar84 - Thingiverse This is a reupload because of course thingiverse is so broken the page and file is gone AND you cant even log in anymore. All credit goes to Skar84
I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…
PackUp Labeled Nesting and Stackable Bins for Milwaukee Packout Organizer Models 48-22-8430 and 48-22-8435 A nesting divider bin system with customized labels for your Milwaukee Packout organizer. October 23rd 2025 Updates: Parametric…
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
A non-functional prop M84 Flashbang grenade from the popular PC game - CS:GO (Counter Strike Global Offensive). Model Notes : There are 2 files uploaded for body 3. The truncated version should work for most printers. Body 5 has a version…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models to find something else you might enjoy! ********** [Update April 4, 2026] if you are looking…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Bust of Wonder Woman - Gal Gadot inspired by the second film I hope you like it I also plan to make her complete sculpture Print instructions I recommend the support under her chin and her back
EDIT: May 2025 These labels have worked pretty well for me but I'm kinda hamfisted and I've managed to break a couple of them so I decided to make a stronger, more rigid version. There's not much left of the original design at this point.…
This model is compatible with the lego system.
This is an old video I made as a quick showcase some time ago and will be replaced with another better one soon: IMPORTANT NOTE Even this LED cube is much much easier to assemble than my previous “ Geodesic(k) RGB LED Spheres ” , it still…
I had sale this models on Etsy for some time but now it's free!
Print settings I printed it in PLA using a 0.2mm layer height with my stock Prusa Mini+. Video showcase
This model is compatible with the lego system.
This is a wall mount for Guition ESP32-S3-4848S040 ESP32-S3 based touch screen, which can be purchased without the relay base. The relay base doesn't fit in a standard 60mm diameter appliance wall box, so if one doesn't really need the…
Did a blender cleanup of the below model so an exported STL would work in a slicer. It's a larger model for rescaling or cutting/gluing depending on your preference. Was not able to get SketchUp to export the STL quite right despite…
Wanted a Stubby Nozzle for my Makita Blower. Found some on Etsy but with Shipping, Taxes and the Price... Its by far not Perfect…
This is a 1:1 scale model of the famous M84 Stun Grenade, better known as a Flashbang. This grenade has articulated pin and handle – the handle can be optionally configured ot be spring loaded and fly off when released. This grenade is…
This model is compatible with the lego system.
Not meant for printing, although I guess you could. This is just a blank to use to generate foam inserts with. Looked around and couldn't find anything for these. I imagine this could be used for the small and large cases too but I don't…
Added a Fillet on the face to ease the handle usage. I also simplified some of the surfaces created a Fusion 360 file and 3mf and strengthened the body of the clips. I use the Add Part > Text command with the “cut” Operation in…
MItutoyo 500-184-20 Battery Cover
A beautiful round, ribbed flower vase for decorative purposes to hold artificial flowers. It is 170mm tall and 101mm wide. The photo shows the vase printed in vase mode. It can be printed in vase mode or printed in normal mode with 0 top…
This model is compatible with the lego system.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…
I needed a replacement cover for a TI-89 Titanium edition that I was selling on Facebook marketplace, so that the buyer would be satisfied. Luckily, I had another TI-84 calculator that still had its original cover so I could recreate one…
Looking Glass Tray-packing puzzle by Stewart Coffin (STC #184-A) Pack six pieces into an obstructed tray. Looking Glass is one of many tray-packing puzzles by Stewart Coffin. It's somewhat unusual in that the pieces enter through a slit…
Endkappen für VELUX 948474 Insektenschutz Rollo ZIL passend für Insektenschutzrollo ab Januar 2003 (AN 01) Ein Set im Original kostet ~25€ + ~10€ Seil am besten mit dem Runden Teil nach oben drucken + überall Support Mit guten PLA sollte…
Head skin piece of LUCKY 13 and MINI 13 in Mac (1984). Files: skin_head_mac - Mac machine without “hello.”, printed with no support or support enforce at the back handle part. skin_head_mac_hello - Mac machine with “hello.”, found that it…
A Paintbrush holder with individual places for up to 84 brushes or pens with a maximum shaft diameter of 10mm. Upper supports at 80, 100 and 120mm height. The individual brush slots will likely not need supports. They're exactly the size…
This case is useful if you have a nice!nano or pro-micro nrf52840 board that you want to use as a keyboard dongle . The lid snaps in place. There are 2 small holes in the case which align with the leds on the supermini pro-micro.
The official Cisco part for wall-mounting 7800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
Model approximating the budget bluetooth development board
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
This is a rough approximation of the flashbang from CSGO. It prints in multiple parts that fit together without the use of glue. All models should load in their recommended printing orientation. The handle and the top cover require…
First released in 2016! OCT 2026 UPDATE My sincere apologies to anyone who has downloaded these files since I posted them here in Jan 2026. I originally included an ARCHIVE.zip of old parts for those who might need them. I did not realize…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
These are for the 48-22-8435 Small Parts Organizer Models, solid and separated, depending how large your build volume is: P-Mag inserts for 10 magazines P-Mag insert for (4) 10 & (8) 30 round mixed I can do this differently on request, I…
I designed this replacement gear to fix an old Philips D6340 cassette tape recorder, but in the process I've learned that this is a common issue also in some more famous products as Magnavox D8443 or Philips D8444. Probably also other…
Support only needed for the Motorpod! Screws: 4x M4 x 25 V2A / 2x M5 x 16 V2A / Inserts: 2x M5 https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307
This model is compatible with the lego system.
This is a simple enclosure I created for the Seeed Studio XIAO nRF52840 Sense with a hole for a male USB-C connector. Even though it was designed for the XIAO nRF52840 Sense, it should also work with the standard BLE version as their…
This model is compatible with the lego system.
I printed it (also) in PLA, PETG or others more solid materials would be a better decision, IMHO. It turns out this device wasn’t really made to lean against the wall, so I did what any person with a 3D printer would do: I printed a wall…
Holder for XY-MOS D4184 Power MOSFET breakout module. Snap-in, no screws are needed to hold the module in place, but holes for small screws are included for extra security. I used 1.8*5.6mm sheet screws. Print Settings Printer Brand:…
This is an attachment for the Makita DUB184 18V Brushless Electric Blower . Note: It may fit other models that use the same blower funnel but I have not tested with others. I have included as many files as I could so it can be modified…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Oil Filter Wrench Removal Tool for Hiflo HF164/HF165/HF184 & BMW R1200 GS/Adventure - Chiave a tazza per filtro HIFLO HF 164 Bmw Gs R1200gs/Adventure Suitable for: HIFLO HF164 / HF165 / HF184 oil filter / Mahle OC306 Inner Diameter 76mm…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remix of https://www.thingiverse.com/thing:6060534 so it fits on an E53 X5
This model is compatible with the lego system.
Fake cigarette props for costumes and cosplays. Based on the original dimension of a regular (74mm) and a long (84mm) cigarette. AMS needed but your can cut my model and glue it if you want.
This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.
This is a very tight fitting case with very little tolerance. Minor trimming with a xacto knife might be necessary, especially around the “rim” on the back when snapping it into the front. The 100mAh battery does not take all the space,…
Simple case for the nRF52840 dongle devboard. The top and bottom snap together very securely but are possible to pry back open with a fingernail/screwdriver/etc. The case doesn't expose any buttons or pins but it would be trivial to add…
Replacement pulls to release the rear seatbacks.
Notebook stand for HP EliteBook 845 G7 that allows for a better height when used in combination with a separate keyboard
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LEGO Compatible 32184-Technic Axle and Pin Connector Perpendicular 3L with Center Pin Hole
Version 2 update: Version 2 of the frame has some notches to click the frame into the rear section. This is a snug fit that snaps into place and is difficult to remove it again but will pull apart without damaging. Version 2 of the…
Ceci est le modèle 3D pour une glissière de store obscurcissant Velux. Le modèle est plus solide que l'original car il intègre un oeillet métallique de 5mm limitant l'usure par friction du fil nylon. Impression PETG ou de préférence PCTG,…
Nike Air Jordan ORIGINAL COLOR 1984 Blu
This is a direct replacement for the Wedco 84003 gas can vent cap. The thread pitch is 3mm and the other diameter of the male threads is approx 22mm. The plain cap should be printed with it's top touching the build surface and no…
Wall Mount for Makita DUB184
2 pencil/pen vases to keep your favorite pens and pencils in. One has indentations going in and the other has indentations coming out. They have the same basic foot print. It is 112mm tall and 92mm for the x and y axis. The photo shows…
I wanted a case for my new phone, but being a budget option, it's not overly popular. This case is admittedly somewhat thick, but I wanted it to be able to sit flat on flat surfaces, rather than rocking around due to the camera. Printed…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Uses these terminals from Amazon for the 18650 sled. For the spring terminal, i trimmed the tab slightly, and it slides in at a 90 degree angle to route the wire up the side of the sled, and through the hole in the top. (pictures…
This is a 2 part 308 Cartridge Insert for Milwaukee Packout ( 48-22-8435 ) case. Typically, when participating in a Precision Rifle Match (PRS) or attending a distance rifle course, you need to bring a fair amount of ammunition. This…
nologotech promicro nrf52840 https://www.nologo.tech/product/otherboard/NRF52840.html
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A component that can be placed between the two circuit boards to secure the antenna connector. I've had the connector come loose before - but with this antenna clamp, the connector is now secure and can no longer come loose accidentally.…
No assembly. Recommend you use supports on the build plate. Some rollers may stick slightly after printing but break free with a little pressure. The more you use the bearing the smoother the rollers become as residual support material is…
A beautiful flower vase for decorative purposes to hold artificial flowers. It is 170mm tall and 111mm wide. The photo shows the vase printed in vase mode. It can be printed in vase mode or printed in normal mode with 0 top layers and 0%…
This model is compatible with the lego system.
Seeed Studio XIAO nRF52840 by Nordic carries wireless capability for the first time and it supports Bluetooth 5.0, also able to operate with low power consumption. It will be your best microcontroller for Bluetooth applications.…
Chevy GMC GM transmission gear shift pointer indicator part No: "7840995" It may also fit other vehicles with the same style pointer The gear pointer broke when I was replacing the lightbulb for the indicator, a new one cost $60, so I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
I bought a used Rescue Helicopter, but there was the Pin missing to hold the Rotor Blades. So i made a replacement. Print the Part sideways, so that the print get the Maximum Material stability, and doesnt brake.
This model is compatible with the lego system.
A rounded OpenPuck case inspired by the Steam Controller Puck design. There are design options using negative space or multicolor printing along with blanks. If you haven't heard of OpenPuck it is an "opensource firmware for NRF52840 Pro…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
