4163 modeli
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Wydruk około 10,61 €–12,96 € nettoWstępna wycena jednego wariantu
An adjustable LST clip that locks into place. I've designed to minimize the number of overhangs. I recommend printing with supports with overhang threshold set at 40 degrees or less. Supports should only be needed on the bottom of the…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
I really enjoyed Sneaks' wonderfully designed Adjustable Stand and how well it works for tablets. Wanting a smaller version that fits for my phone, I scaled down the parts, removed material from the bases, and slightly modified the hooks.…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am building a print enclosure and wanted the ability to close off the extractor fan hole to retain as much heat as possible when the fan is not being used. I found the original design by @Edezigns:…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can add tube when you want to hold more tippet spools. Additional tubes are 2types(10mm,15mm) And you can add tube both side of body.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
An adjustable PET bottle opener that can be used to make easier to open almost every kind of PET bottle caps. The joint makes it very strong, grippy and simple to use! Print in place , no supports needed. Hope you like it!
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…
Wydruk około 5,89 €–7,20 € nettoWstępna wycena jednego wariantu
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Original drip tray has fixed position. When user want's to make a shot (double shot) into a taller cup/mug, first has to pull a shot into a smaller cup and then pour the shot into the desired taller cup. Having an optional drip tray…
Wydruk około 8,99 €–10,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Mise à jour 2024-10-01 - Ajout du fichier paramétrique pour Fusion 360 pour la patte vissé Longueur total de la visse, Épaisseur du coussinets et son diamètre Update 2024-10-01 - Added the parametric file for Fusion 360 for the screw leg…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adjustable stand to hold laptops in vertical position for storage or use with a separate monitor. Build Info: PLA 0.3 layer height 2 perimeters / 30% In-fill/no supports
Wydruk około 6,13 €–7,50 € nettoWstępna wycena jednego wariantu
Print Settings Rotate the model onto its side for layer strength. I used 15% triangular infill for my print, but if you need additional support increasing the infill should be fine. If all else fails, increase stand_thickness . Parameters…
Wydruk około 6,59 €–8,06 € nettoWstępna wycena jednego wariantu
The Adjustable Corner Drill Guide offers precise drilling for corners. It's parametric, customizable, and prints easily without supports. Features: Fits 1-8mm drill sizes Current files fit 2, 3.25, 5, and 6 10mm spaced holes for accuracy…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adjustable door safety catch that prevents your door from fully closing, saving thousands of children's fingers from being slammed in a door! Fits any standard 35mm thick door. To adjust the door opening, slide the device further along…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adjustable door lifter for installing and lubricating hinges on doors.
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
This is made to fit Simmagic Alpha models. Printer with a 0.4mm nozzle at 0.3mm layer height. Used 20% infill. When setting up in slicer you have to add an instance and then mirror it to make a pair. Make sure to use enough vertical…
Wydruk około 5,51 €–6,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
Wydruk około 4,56 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this thing to connect the angle-adjustable outflow nozzle to the spray tube outflow. Print ball-head facing down, “spiral vase” mode. I added a brim to make it stick better. I've included the SCAD file in case you'd like to make…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
long: 70 x 55,5 mm screew: 27 mm
Wydruk około 4,12 €–5,03 € nettoWstępna wycena jednego wariantu
Hello, Today I have Feed Support 50mm for you. Suitable for raising or adjusting the legs of a table, chair, or bench. It can really hold a lot of weight! I used PLA/PETG Basic as the material No need to use supports If you are interested…
Wydruk około 3,58 €–4,37 € nettoWstępna wycena jednego wariantu
Om groenten of planten aan de stok vans te houden dat ze niet wegzakken. De gaatjes maken dat je ze kan aanbinden groot of klein. Ik gebruik ze voor mijn tomaten planten. To hold vegetables or plants to the stake so they don't sink. The…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This project contains An alternative, adjustable tenting stand for a Sofle Choc Case I made: https://www.printables.com/model/1286514-sofle-choc-case-and-tenting-stand For both stands, left and right, you need: 8x M3x4x5 brass heat…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made it beacause one of my adjustable table legs have broken, with this support the broken leg will match the right height. You can print it in Petg with a 0.3 mm layer height, 15% infill and it will support with no problem all the…
Wydruk około 5,25 €–6,42 € nettoWstępna wycena jednego wariantu
Kleine Säule um z.B. im Eingang von Bienenbeutenkästen Wetterschutzvordächer anzubringen als Schutz vor Regen um die Einfluglöcher trocken zu halten. Oder für schmale Unterstützungsprojekte. Zwei Varianten eine mit glatter Oberfläche eine…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Backstory Inspiration came from the creator @yunayuna0522 on TikTok who uses an adjustable wrench instead of a shifter rod in her purple Honda S660 build My version connects to the Thrustmaster TH8S for a similar look and feel. Printing…
Wydruk około 6,13 €–7,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I broke the original part. originali it was glued two part. not so perfect for torsional force. I was try to copy the original shape but print in only one body (mixed two part in one body) the rubber o ring it was the original. i dont…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
If you are a developer, and you don't want to hide the proximity sensor with your hand then this extension is for you! Here are the assembly instructions:
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Simple Adjustable clasp that I needed to use with a strap to lock in place for a laser diode module to test Photobiomodulation on different parts of the body. For more Information https://pbmwave.wordpress.com/
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
It is a simple mechanism that provides column-like support for structures that require it. The support has a dynamic height that can be adjusted in place of use to lock it. To change the support height, fix it with your hand on a surface…
A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping…
Update A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me…
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
Closed feet height = 50 mm Extended feet height = 80 mm Tested with PLA: 0,15 layer height; 15% infill => 75+kg load per feet was no problem :)
Lets you drill into something at a specific angle. It's quite small, the guide hole is 8mm. Optional: add an M3 screw to lock it in place. Or else it will just swivel around. Assembly Instructions: see gif
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) Height-Adjustable Feet with Ball Joint — M20×2 Thread (Heavy-Duty, 75 kg Load Tested) These height-adjustable feet are designed for…
Big and strong furniture leg. Its height can be adjusted after installation, from minimum 70mm to almost the double. Needs 4 M6 or M8 screws to be mounted. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No…
I have uploaded a new file with the updated main body, and also a new screw with the file name "screw update." Someone pointed out that they were facing a problem screwing the parts together. Because I only designed half of the part and…
Vertical Laptop Stand Cradle up your laptop vertical and get your desktop neat. Designed for laptops and IPad/Tablets, put two devices on the stand at the same time. Adjustable Model the exported modular stand consists out of the base and…
*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…
Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…
This model has been updated with a V2 version that requires M3 hardware! A .STEP file is now also included that you can use as a starting point for custom dovetail add-ons. Thanks to @bequ3 for his comments and improvements ;) I needed a…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
About This is a funnel for easily filling the Adjustable Spool Holder for Silica Gel / Spool Weight with silica gel. It also fits the hygrometer version of course as it has the same lid dimensions. It was designed so it can be easily be…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
After seeing many people's problems with my previous fidget switch' s spring, I decided to create a new variant that allows you to adjust the spring's tension whenever you want. Some days you may want a soft, tactile click; other days you…
This is my first try to make a parametric model, this means you can change the model's size by changing a parameter. For this you have to open the .f3d-file in Fusion360. Then go to the “Modify”-menu and click “Change Parameters”. There…
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
Adjustable Feet Practical adjustable feet, perfect for DIY projects, cabinets, tables, or 3D printers. The threaded design allows you to easily adjust the height and keep your furniture or machines stable on uneven surfaces. Versions…
Very detailed instructions can be found in the PDF file under “Other Files”.
Whether you need a small adjustable holder for a pocket light or a new mount for your microphone, this model does it all, is adjustable (mechanical lock, not a friction lock) and clamps right onto any surface. Should be able to carry…
Description Adjustable GPU Support Bracket This universal GPU support bracket is designed to provide stable support for heavy graphics cards, such as the RTX 4090, and prevent them from sagging or damaging the PCIe slot. The support…
You can print and use this to replace existing adjustable bed frame support, which is usually made of weak and thin material. I recommend to glue a piece of rubber to the foot to avoid any noise. 0.3mm, rPETG, 5h.
Update 18th May 2022 16" Tablet version added, requested by a printables user, untested yet. This version needs at least 300x300mm bed size 3D printers like Creality CR10. Including in the folder V1 and V2 front braces. Old V2 legs will…
I was looking for a fully 3D printed AR style butt stock, but couldn't find a decent option that I liked. So, I designed this one. I hope you like it. It fits on a standard mil-spec buffer tube, and it also fits on my own designed buffer…
A book or comic book display stand so you can proudly show off the best of your collection. Print two of the legs, and one horizontal bar as seen in the pictures, easily breaks down and comes together again making book display simple.
The height of the leg can be adjusted from 43 mm to 71 mm.
…Please be sure to hit like & post a make, I'd love to see your prints! Here's the SV06 PLUS Vortex V2 system with adjustable height for use with either the Sovol stock nozzles or regular Volcano nozzles. Also this attachment method…
3 spline locking joints Fully 3d printed. Locking taps built in to hold the pad in holder. Will be a snug fit. Recommend Slicing Tolerance set to Exclusive. Frame mount>Arm 1>Arm 2>Pad Holder I would recommend supports on the pad holder,…
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
Summary This is a 1:24 sclae model of car lifter in a kit card style. They also fit the 1:24 models I have published. Can also be used for 1:18 scale models. After printing, the model can be assembled with the help of integrated…
I remixed Petr Vacek@PetrVacek_20701 's awesome model to accomodate my kitchen which needed new legs. Includes clips to attatch a plate beneath the kitchen cabinets, and also a wrench for easy tightening while the leg is under pressure.…
2 sizes 8cm x 10cm x 3cm 8cm x 15cm x 3cm Print multiple separators (suggest at least 4pcs) Print with different colors for better contrast. Print orientation:
Each half of the stand is 30mm wide to help promote stability underneath the laptop or tablet. There are 2 frame versions that are cross compatible with all v2 Feet and provide slightly different angle options. v2 is a Right Triangle…
Slot in the back for a 60x10x3 bar magnet . No supports needed. Simply break off the included support pieces
This stand fits Laptops up to 17'', one size fits all (tested with 17'' and 14'' devices) The base does barely fit on the print bed of a i3MK3 - you have to rotate it to the diagonal. Further, add some more perimeters for the bolt and the…
Tired of phone stands that sag under the weight of an Ultra or Pro Max smartphone? This Gravity Desk Station is a heavy-duty, professional-grade solution designed for maximum stability and precision. It uses a smart mechanical linkage to…
Adjustable Support / Furniture Leg Introducing the versatile and durable 3D-Printable Adjustable Support / Furniture Leg, designed to cater to the needs of DIY enthusiasts, professional carpenters, and general consumers alike. Perfect for…
Keep your tape rolls organized with this adjustable tape holder designed for the IKEA Skådis system. This versatile holder fits tape of all sizes, making it a practical addition to any home setup. The design includes two side arms with…
This model is inspired by the Desk Bag Hook from PieSupplies . This variante is more rounded and offer an additional hook. The FreeCAD source file with some parametric options is attached. The photographies display the model desk_hook.3mf…
Use it to anchor a door or window in any position. It uses a clamp-like mechanism. Screw the bolt to make a friction with a perpendicular to the door surface. A door can still be fully closed with a mounted stopper on it. Just unscrew the…
Yes, here is my 100th template :-) This is a modification of the template from : "Adjustable Folding Phone Stand - Single piece print, built in hinges" https://www.thingiverse.com/thing:3041592 What else have I done? The template can be…
A redesign of Zach Freedman's jumper wire comb so it doesn't require magnets. Should be fully compatible. The included picture shows both my comb and Zach's original in one of my bases. Changes: The base is one piece, rather than two. The…
Adjustable utility knife Vertical and horizontal versions + 2 Self Tapping Screws M2.6 L8. Horizontal versions: Vertical version: Use 2 Self Tapping Screws M2.6 L8. Note: Follow safety precautions when working with a blade!
Furniture legs with two heights to choose, 25mm adjustable to ca. 35mm and 55mm to ca. 80mm. (I recommend checking out the redesigned model on my profile with more heights available and improved threads)…
Adjustable phone mount for the Moza R5, R9, and R12 wheel bases. Can be set at 6 different heights and can be adjusted to hold phones up to 175mm x 13mm. Uses M4 hardware for assembly and M3 to mount to the base. Note that…
Print each half to lie on its end so that no supports are required. When printed slide both halves together and adjust size. Side and back lips go under vent register so no magnets are required.
This is an adjustable print-in-place spool for filament samples. No assembly needed, just remove from build plate, snap off the built-in supports and you're good to go. How to use: Adjust the arms inwards until you can fit the sample roll…
What is it? It is a height adjustable table with basic dimensions (length x width) of 225x200mm. The height can be adjusted from 115mm to ~ 200mm with a crank. The table is sized so that it can be printed on the most common printers such…
Adjustable ruler positioning block. Highlights: Fits rulers of different sizes. Fully 3D printed, no hardware required. Just add ruler. 90° and 45° angles. Use as depth gauge, tightening nut secures measurement. Printing Tips: Model is…
This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…
A phone holder with adjustable inclination. It firmly holds set position without needing to engage any locking mechanism. Prints in place with no supports. The initial turn takes a little bit of extra force. Do not over torque the…
Adjustable leg for your furniture or shelves. The holes for attachment are 4mm in diameter. The height of the foot is possible from 7 to 12 cm. The leg is adjustable even after loading with a 25mm wrench.
You can use 1 or multiple of this screw to prevent wear on the PCIE slot for your GPU. It will not melt if printed in PLA.
This is a basic height-adjustable shooting rest using a screw-and-locknut adjustment. It is designed such that no brims, supports, or rafts are needed to print. There are four components, but you will print a total of five parts. The…
1:10 RC chassis with adjustable wheelbase, and flexible suspension. How to build it See pictures and fusion 360 assembly drawing. There is color code bolts. Green - 8 mm bolts Yellow - 12 mm bolts Black - M3 nut Filament Prusament PLA -…
KEYBOARD OR TABLET STAND 14 Sept 2024 - New design available :- Desktop Tablet Stand and Organiser by Peter Martin | Download free STL model | Printables.com Decided to design a keyboard stand, a few iterations later this is the result. I…
Was told by my wife to finally do something with those godamn lids, so... Enjoy :) Print instructions Category: Kitchen & Dining
