54 modeli
I wanted to mount the reolink Argus3 camera with it's corresponding solar panel on a 100mm drain pipe. I printed in PETG. Let's see how lang that is going to last in the sun. Material for camera mount: 1 x 20mm M6 screw 1 x M6 hex nut 2 x…
Wydruk około 3,58 €–4,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple storage for two pods for voopoo argus Z. Let's try.
A polemount for the Reolink Argus Eco IP camera. The camera can be attached with 3.5mmx15mm screws. Not sure if oither Reolink cameras would fit as well. Those are the base data you might need: Outside diameter: 69mm Camera screw holes…
Ho realizzato questo supporto per sigaretta elettronica (Voopoo Argus/Argus Pro) compatibile con il vano portabicchieri
Made a case for the Voopoo Argus G vape kit so it is not too exposed when stored away. I found that often the pod would come loose and the liquid would leak. With this the pod will stay clean and secure on the vape. The vape can be use…
Argus — Motorized Microscope Focus Stacking Machine Argus is a motorized microscope for focus stacking macro photography, built almost entirely from the guts of old 3D printers. Focus stacking is the headline, but the motion really helps…
Simple stand for Argus Vape device. Inner width x length: 27.1mm x 14.8mm (0,5 clearance)
No-effort-November model, needed something to hold old security cameras for indoor use. Found the original and simply added a wider base. Not exactly a model I'm proud of but it gets the job done and gives these cameras a new life plugged…
Due to a broken axis of the original knob for the switch of te sensor module I made a replacement. I used Polymaker Polymax because of good Layer adhesion. The wall of the cylinder is thin you need very good layer-adhesion because of the…
Tripod quick release plate replacement designed to fit a Targus TGT-58TR but will likely fit any tripod requiring a similar sized quick release plate. The widest portion of the mounting area is 42mm (~1 5/8) square, the skinniest portion…
Say hello to the charging stand for the VooPoo Argus Pod System. The stand is designed to hold your pod in place while it charges, with a special place for the charging cable to be inserted between the "LH" and "RH" cable box parts and…
This planter is modeled after the iconic design of the Argus C3 camera Aka "The Brick" This planter prints in 3 parts. The base, the lens & the lens mount. The lens and mount are threaded to tie each other together and mount to the base.…
This is simply a quick release mount for a cheap Targus tri-pod. The tapered part is about 35mm. Print instructions I printed it with essentially default .15mm speed and 20% infill
I did not create this model. I just ripped them from the PS2 version and posed them.
Wall mount for camera and solar module. For Reolink Argus 4k / Pro. With a bag for the cable from the solar module. Requires only 2 holes in the wall. With drip edge so that there are no running marks on the house wall.
Diplodus sargus — The White Seabream 🐟✨ The white seabream (Diplodus sargus) is one of the most familiar and iconic fish in the Eastern Mediterranean. I’ve seen it countless times while snorkeling — it’s everywhere, yet somehow never…
I designed the planter to look like the iconic Argus C3 camera. It can be printed in three parts and assembled with no tools or glue. The base will need to be printed with supports and if edge warping is an issue please consider using a…
I took a 3D scan of this broken piece from my tripod and did some post-processing in Blender. The result works great and I've been using it ever since! Captured on EinScan SE desktop scanner.
Largus rear door handle print with 100% fill
The Argus C3 135-film rangefinder camera, made in Ann Arbor, Michigan from 1939-1966, is a bit of American history. About 2 million of "The Brick" were made, and many survive. The interesting thing is that the clunky camera used…
Le support de fixation d'origine fournit par Reolink n'autorise qu'une attache à un mur vertical. Cette équipement de fixation permet une attache à l'horizontale, sur un cache moineau par exemple.
Update 10/31/2017 I went into Inventor and messed with the planes a bit. I was able to fix the issue with the wingnut hitting the pivot rod thing. I don't know what to call it. When I was filming a project for school, the pivot for my…
lens adapter to use an Argus C3 lens with a Pentax K2 film camera. (1.75 mm white filament used to indicate where to attach the adapter to the camera) Print time on Ender 3 Pro: 2 hours 21 minutes total filament use: 8g/ 2.81 m
Very simple and functional Vape holder for the Voopoo Argus Z Voopoo Argus Z - 1 - will hold 2 x Vapes, 1 x Vape Juice Bottle, and either a slimline battery pack or spare pods Voopoo Argus Z - 2 - will hold 2 x Vapes More to follow -…
Having a pivot-hung window on a sloaping roof, I wanted to mount my Reolink Argus 2 camera and the solar panel non-permanently. Hooks into the window handle to be hung from and gives you the option to mount camera opposite from the solar…
20mm Diameter x 2mm pitch threaded end cap for a Vargus deburring tool.
Tisknuto na PLA, 0,2mm
My daughter wanted a stand for her vape while charging so it wouldn't fall off the shelf onto her head. Hope this helps someone out there.
The Anders Travel Telescope uses a 6mm thumb screw to mount the base to the tripod. The Targus uses a 3/8" stub. The two are not the same. This fixes that incompatibility. Good? No? Okay, read on. As a beginner to telescopes and astronomy…
Largus rear usb charger assemble using glue print with supports
Really enjoyed the mount for my GoPro and wanted to use this base as a platform for mounting other things. STL's are hard to edit tho so I converted this to a STEP file for easy additions in CAD. ProteanMan: Great design!! Sorry about…
this adaptor will allow you to mount an Argus C3 lens to a canon eos camera while still being able to focus to infinity.
Someone I know had a broken rideable laptop bag. I looked at it and after some investigation it turned out that the button was broken. Now the bag is like new.
The lift bolt in my Targus TGT-BK58T Tripod was stripped. I designed this to replace it. Print Settings Printer: Terality Rafts: No Supports: No Resolution: 0.1 Infill: 50% Filament: Hatchbox ABS Black Notes: I used Hatchbox ABS Black…
10G server NICs are usually ugly green PCIe cards. Not a great fit for a gaming PC. But maybe you still want one for whatever reason. A backplate can easily fix this. This one is made for the Inter-Tech Argus ST-7211 and hides the ugly…
Just slide into the vape box. I managed to print it without any support material with PET-G filament.
Dock mounted on Ikea Skadis. Holes on the base to cool the device. The hook is glued and held with two 3mm diameter pins. The pin holes are 3.5mm. The hook is derived from skadis_waterscale-hook.stl by Printuin.
Unscrew the Argus C3 lens by setting the range finder dial to 3ft. Unscrew the idler gear cap and remove the idler gear. Unscrew the lens from the body.
Befestigung der Halterung 2 x M10 Schrauben 2 x M10 Muttern Befestigung der Kamera. 2 x M8 Muttern 2 x M8 Schrauben Um eine sehr stabile Form zu bekommen hab ich 5 “Walls” genutzt.
For https://www.amazon.com/dp/B09QBQYXHXhttps://www.amazon.com/dp/B09QBQYXHX I added little rubber bumpers to try to reduce desk sliding around
Simple Camera Cover/Stealther for the Reolink Argus 3 Pro (may fit others with similar casing?) Wanted the white camera to be a bit less in your face/noticeable in our "secure" basement garage. A black cover makes it less obvious amongst…
I was tired of my vape falling over in the side pouch of my back pack leading to the bottles leaking a little juice and it just getting generally nasty in that pocket. Well it turns out I want one for my desk too so I don't need to hunt…
Layer Height: 0.15 Supports: Yes For your purposes, I am attaching the Fusion 360 source files.
Replacement side pieces for Targus External DVD-RW and possible other format external disc drives. Brand: Targus Model: PADVW010U P/N: 0US3000797 Printed with .1 layer height, using Cura's "Fuzzy" setting makes for a decent looking part.…
Made from two parts, need glue and atraight arms that don't grow out of your as+s.
Best printed with <20% infill in the vertical orientation. Non Printed Parts: - 2x M3x20 screws - 2x Spade Connectors (I used 20AWG because I had them on-hand) - 2x M3 Washers - 2-Conductor wire See the attached photo for how it all goes…
Print on PLA or PETG with printer default settings. Pause the printing at layer 765 and insert a steel ring with a thickness of 2 mm.
Mount your Reolink Argus Pro 4, including solar panel with only 2 screws, +rain protection and cable storage. Mount the camera and the solar panel using five 3.5x16 flathead screws.
🇩🇪 Deutsch Die Halterung wird auf das Rahmenprofil gesteckt und lässt sich jederzeit wieder abnehmen. Den originalen Montagefuß meiner Reolink Argus Eco habe ich mit drei Schrauben direkt in den Kunststoff geschraubt. Vorgegebene…
It's 3d printaboll feet for the Targus laptop cooling pad to raise it for better airflow and elevate the laptop
Made from two parts, need glue and atraight arms that don't grow out of your as+s.
Just slide into the vape box. I managed to print it without any support material with PET-G filament.
Unscrew the Argus C3 lens by setting the range finder dial to 3ft. Unscrew the idler gear cap and remove the idler gear. Unscrew the lens from the body.
