Wyniki wyszukiwania: armytek

Sortowanie

22 modeli

P
PrintablesSlaig

Head mount for Armytek Wizard with rubber ring (+other 18650 lights)

Instructions PETG or water resistant material recommended. Print in place on the flat side, with 100% infill, no supports needed: Headlamp_holder_with_rubber_ring v1 (stl or 3mf) is recommended and the most versatile or…

Pobrania
187
Polubienia
20
Ocena
5
P
PrintablesTri-D

Armytek Wizard Flashlight - Bike Mount

This is my desgin of a bike-handle mount for the neat Flashlight "Wizard" from Armytek. The flashlight sits very tight, therefore it is not necessary to additionally fix the flashlight. Nevertheless for rough terrain some people might…

Pobrania
154
Polubienia
19
Ocena
0
P
PrintablesPointNemo

Armytek Wizard Backpack Mount

Horizontal and vertical 20mm backpack mounts for Armytek Wizard and Wizard Max. Material: PETG Resolution: 0.2 Perimeters: 4 Supports: yes

Pobrania
127
Polubienia
30
Ocena
5
P
PrintablesCitruspers

Head mount for Armytek Wizard (+other 18650 lights)

Why The supplied silicone head mount for my Armytek Wizard wasn't very good. They've since updated the design, but it's often out of stock and shipping is expensive.... ...So I made my own! Compatibility I've designed (and tested) this…

Pobrania
104
Polubienia
20
Ocena
5
P
PrintablesChrido

Flashlight Diffuser for Armytek Wizard C2 Pro Headlamp

This 3D printed diffuser is designed to fit the Armytek Wizard C2 Pro headlamp and is perfect for camping or other outdoor activities. It attaches easily to the headlamp by simply clicking it on, and provides a soft, diffuse light that is…

Pobrania
69
Polubienia
16
Ocena
0
P
PrintablesNL

Armytek Wizard C2 Pro Gridfinity charger dock

I use (and charge) my headlamps a lot, so I like to keep the charger plugged in and ready, but the magnet on the Armytek charger tends to stick to magnetic things and short them out which is annoying and possibly a fire hazard. I wanted a…

Pobrania
49
Polubienia
10
Ocena
0
P
Printablesjjonek

Parametric Lumonite / Armytek GoPro mount

Introducing a practical GoPro mounting solution designed for Lumonite and similar flashlights such as Armytek. This mount offers easy customization, ensuring a snug fit for various flashlight models with a straightforward snap-fit…

Pobrania
47
Polubienia
0
Ocena
0
P
PrintablesGabriel Balogh

Armytek Wizard head lamp cap

by attaching this cap to the headlamp (printed in red) the headlamp can be used as a tail light

Pobrania
38
Polubienia
3
Ocena
0
P
Printablesdruulian

Armytek Wizard C2 flashlight diffuser

Put this on the head of your C2 flashlight. Works with C2, C2 Pro (Nichia, WR etc). LIkely will fit Elf C2. Won't work with C2 Pro Max. Add fuzzy skin to the bulge in the slicer to get better diffusion. Transparent PETG is a good choice…

Pobrania
29
Polubienia
6
Ocena
5
P
PrintablesElliot

Armytek Magnetic Charger Skadis Mount AMC-01 (Wizard, Prime, Tiara)

Armytek Magnetic Charger Skadis Mount AMC-01 compatable with the Wizard, Prime, Tiara variant. Print in a filament that can flex such as PETG or risk the charger holder tabs breaking. Note: there are two versions of the T-Clips.

Pobrania
28
Polubienia
5
Ocena
0
P
PrintablesFrank

Armytek Wizard

Holder/chargingdock for Armytek Wizard Flash ligth works with old white charging cable V3.3 Change bottom holt to 8,3mm for better fit

Pobrania
27
Polubienia
8
Ocena
0
P
Printablesjmvspeleo

armytek lamp holder for elastic headband

support de remplacement pour lampe Armytek sur le bandeau élastique . la lampe est imperdable et ne tourne pas . pas de problème pour changer la batterie replacement holder for Armytek lamp on the elastic headband. the lamp is captive and…

Pobrania
11
Polubienia
1
Ocena
0
P
Printablesjmvspeleo

Armytek lamp stick-on clip holder

support a coller pour le clip d'origine de lampe Armytek a coller avec un double face puissant 2eme support en 3 pieces qui intègre les fonctions collage, clip et élastique support to be glued for the original Armytek lamp clip to stick…

Pobrania
10
Polubienia
7
Ocena
5
P
PrintablesPanicMan

Armytek wizard holdr etc

Armytek wizard etc lamp holder on helmet. Support no need. PETG full walls

Pobrania
8
Polubienia
2
Ocena
0
P
Printablesjmvspeleo

screw-on bracket for armytek lamp 18650

support a visser sur le casque, pour mettre une lampe Armytek la lampe ne tourne pas et ne tombe pas. on peux changer de batterie sans problème. support to screw on the helmet, to put an Armytek lamp the lamp does not rotate or fall. you…

Pobrania
7
Polubienia
2
Ocena
0
P
Printablesjmvspeleo

Armytek lamp support glued

print, and glue it with double face on your helmet ! lamp will not fall Print Settings Rafts: Yes Supports: Yes Resolution: 0,2 Infill: 100 Filament: filatec TPU82A Notes: print it vertically, with support and brim Category: Sport &…

Pobrania
6
Polubienia
2
Ocena
0
P
Printablesjmvspeleo

screw-on bracket for armytek lamp 21700

support a visser sur le casque, pour mettre une lampe Armytek la lampe ne tourne pas et ne tombe pas. on peux changer de batterie sans problème. support to screw on the helmet, to put an Armytek lamp the lamp does not rotate or fall. you…

Pobrania
5
Polubienia
1
Ocena
0
P
Printablestehlicka

Armytek Wizard C2 PRO diffusor

Infill 5-10% 0.2mm PET-G

Pobrania
5
Polubienia
1
Ocena
0
P
Printablestanatos91

Armytek crystal improved head mount

More comfortable mount on your head. It can ratate. Use two M3x10 or M3x12 skrews for assembly.

Pobrania
5
Polubienia
1
Ocena
0
P
Printablestanatos91

Armytek crystal rear mount for bike

You must insert the flashlight from the chamfer side. Also you need an M4 nut and skrew. Fast and safe installation for your Armytek crystal red rear light. 0.2 mm layer, PETG, PLA.

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

Armytek Wizard C2 flashlight diffusor

Put this on the head of your C2 flashligh. Works with C2, C2 Pro (Nichia, WR etc). Won't work with C2 Pro Max. Add fuzzy skin to the bulge in the slicer to get better diffusion. Transparent PETG is an optimal choice for the filament.…

P
Printables

Armytek wizard holdr etc

Armytek wizard etc lamp holder on helmet. Support no need. PETG full walls