139 modeli
SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…
Can be scaled to a various sizes to create a whole sparrow family. There is a “whole” version with all the parts together if you are printing as a scale where the individual parts are too small. Papa: Width: 9.3 cm Depth: 11.5 cm Height…
Elevate your archery experience with this exceptional 3D printed bow model, designed for both safety and precision. Crafted for the creative DIY enthusiast, this project allows you to explore three different arrow options, catering to…
A simple extruder indicator. Two rotating arrows as you know them from loading screens. Required magnet: 8x3mm or 6x3mm If you like check out my other designs too!
A small remix of the original design to move the arrows to the top of the counter, making it easier for other players to read from across the table.
Just print two holder without support. Snap in up to 16 arrows with 8 mm diameter. Three arrows with a diameter of 7 mm can be inserted in the middle.
A simply wall mount for bow and arrows
UPDATE: I somehow managed to have the number 7 (VII) two times on the clock, so if you downloaded the old version, I recommend to download the new one. Sorry! Since I really liked the looks of the Big Ben Clock, I decided to model it in…
just print two holder without support and snap in up to 12 arrows
Took my earlier design of the Stripes Stealthburner Face and mirrored it for a symmetrical look that might look like Arrows. The new design has a depth of 0.4mm, so use 2 0.2mm layers of Z-Hop when printing with the First Layer Z-Hop…
This is an optical illusion combining both a left pointing arrow illusion and a right pointing arrow illusion. Look at it from one side and the arrows point in towards the center of the disk. Look at it from the other side and the arrows…
This is a 3d printed door jim modeled after the Sparrows Mini Jim because I'm cheap and didn't want to pay $10 + Shipping. Use it to open doors. It's currently 1.5mm thick and I kind of want it thinner but it's already a bit flimsy so I'm…
Some broadheads for arrows. The original typ is 8mm diameter and the shaft is 7mm. They actually work :D. Print instructions Used PLA and it works. You can use whatever you want
This shape is created using isometric geometry. The 60 degree angles between the faces creates a shape that locks into itself. A single shape can be in contact with 6 others at the same time, which is one of the most intricate…
Since they are constantly getting lost and the children are sad, I have constructed two replacement arrows. They are compatible with the Lego Projectile Launcher (part number 15301) and fit into the rear handle end of a "Simba - Next…
Still waiting for the arrows so just made my owns. Support is needed for the vanes Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Category: Toys & Games
I haven't printed this yet but I'm hopping the friction will hold this in place so it can be removed from the arrow I'm using (edit) V2 files are intended for the bottoms to be formed around my arrows with a heat gun Print Settings Rafts:…
Print with bright colors, for example Prusament PETG Neon Green or Prusament PETG Prusa Orange This model was inspired by directional marker (by ximox)
A simple case for Sparrow Practice Locks inspired by https://www.thingiverse.com/thing:4955652. There is an OpenSCAD file you can customize and I have uploaded both a 4-lock version to hold the standard Progressive Lock set as well as a…
Searched for simple arrows and didn't find any here, so I made it. Arrows for stepper motors. It's useful than testing CNC, 3D printers, … stepper motors how they work. Diameter: 5mm, 8mm, 10mm, 12mm. P.S. Check out other of my models,…
Thanks to Ludodg for the initial design. V0.2 1/27/2026 Initial public beta release. Jig has been tested for printability. Successfully used to fletch 1 dozen of the following arrows with spider vanes Easton x10 Pandarus CA320 Elite…
While adding to my fighter jet bookmark collection I decided to do the BAe Hawk and a natural progression from that was to design a Red Arrows bookmark. I've included several bookmark designs including facing up or down and a three jet…
Textured arrows to put over WASD keys
Don‘t forget to leave a make Kumihimo Disk – Handmade Braiding Tool Beautiful • Functional • Easy to Use Bring your creativity to life with this beautiful Kumihimo disk! Whether you're a beginner or an experienced braider, this disk is…
a Mario Kart Live play set thats optimized for hospitals, with minimal geometry for easy cleaning. the gates are made of 4 parts, with two identical legs and two segments for the banner. the two banner sections should snug fit and i…
Plug follower and repining tool for a Sparrows practice lock. I remodeled it from scratch and added a chamfer to the bottom to make it print better without supports. I also added a grove to the top to help to align and reinsert the…
A simple nesting box for sparrows or similar sized birds. The hole has a diameter of 33 mm. Derived from a NABU sparrow
Have you ever tried a puzzle ? The answer is probably yes. But have you tried the 5 arrows puzzle ? The goal of it ? With the 4 arrow you need to find, or create a 5th arrow only using the 4 arrow. Looks challenging ? Try it now for free !
Lockpick handles for picks with scales, such as Covert Instruments and TOOOL, and without, such as Sparrows. I like longer and thicker handles. These are a tight fit, so I heat the butt end of the pick with a heat gun and push them in. If…
I used a random PLA for 3D Pen, and it works really good Print instructions Printer Brand: Prusa Printer: [i3 MK3] Rafts: No Supports: No Filament: Hatchbox PLA Copper Notes: One of this design is printed in Hatchbox PLA Copper
This is my take on a portable all in one kit for the Sparrows cutaway practice lock and reload kit. Plastic baggies in my house just don't last so I wanted something a little more durable to house everything. The goal was to have a…
Really liked the previous practice lock holder but personally found the fit a little loose for my liking. Fired up OpenSCAD and haphazardly adjusted the original design. This variant holds the locks without any rattling or significant…
Designed specifically for small neighborhood birds, this birdhouse combines function and form for optimal comfort and protection. The house prints upright and mounts with a slight forward tilt—about 1 cm—to allow moisture to drain through…
hour hand diamter: 7mm minute hand diameter: 3.7mm hour hand length: cca. 55mm minute hand length: cca. 90mm
I regularly see the Red Arrows display team of the RAF practicing over their base in Waddington Lincolnshire. I looked for a decent free model but couldnt find what I needed so tested my CAD skills in Onshape to create one for my…
I designed this simple cooling vent to be used on my Arrows Marlin and without being scientific it does help keep the battery much cooler. Along with the vent I made a template to allow for a perfect fit. Simply hold the template where…
Two Sparrows 2D to 3D Ondersteunt: nee Resolutie: Dynamisch Invulling: 50% lijn Filament merk: 195 -200 Filament materiaal: PLA
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is an original creation made from 2 pieces of old clip art I found. I had the idea and just looked for silhouettes that would work. Made a version with 2 different bases and a version with no base for you to hang or whatever.
This model is based on the American tricolor but you can change it to the country of your choice by creating your own writing. On the base there are two holes that are used to pass the cable for connecting colored LEDs, in fact this model…
Pocket Quiver that holds 8 arrows. The diameter on the slots is 9.75mm which is snug on the G5 BMP practice broadhead that I sometimes use and a little loose on the regular field tips. It's also a little unwieldy and I'm not sure I'd want…
The arrows drawings come from 104953225561783920874 on vecteezy (https://www.vecteezy.com/vector-art/10268362-collection-of-simple-vector-black-arrows) --- Erratum (20/10/25): Addition of a bambu lab 3mf file
Re-did the entire model from scratch to make it parametric, but greatly in the style of the original. Width of the base, arrows and bow can be set in the parameters for easy customization. Arrows have been moved further away from the wall…
This is a Mopar emblem for fender application, 6.5cm height, can be scaled if needed but this looks great on a car. Best to print with PETG or other filament that is suitable for automotive. Normal PLA will get too hot and melt under…
A Medieval Barrows. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
I made this quick arrow tube insert to hold 12x 7,4mm (O.D.) arrows, inside of an arrow tube case/storage/quiver (One of the telescopic ones, which are 65mm inside diameter). This way the fletchings won't get damaged. You need to print…
This is a remix of the small bow hanger (by RealBadDad) ment to be placed on a shelf/table
I traced the picks on a comparator and made a slim card so that you can store your picks in your wallet. I ended up with a painters tape solution for holding the picks in situ. I had gone through many iterations with tensioning dimples to…
I first made a Red Arrow model using Onshape which wasnt bad for a first go but wanted to learn Blender so this is my second attempt. I used spray paint and water slide transfers (you can get the paper on Amazon) to enhance the model as…
You can also use a 608 skateboard bearing for better performance but the printable one works totally fine. If it doesn't fit because of your printer settings you can just print another one with 95% or simply remove one frame of the bearing.
Sparrows lock holder/grip for lockpick training. I created this for those who want an easier way to hold a sparrows lock without using a vice. UPDATED FILES NOTE:- One user found his locks were slightly too large for the original version.…
Arrows to make connections between locations in the Arkham Horror LCG. One side marks bidirectional connections, while the other side marks unidirectional connections. They can be printed with two colors (as shown in the photos) if your…
I wanted to use the Knob with Arrows from the original model, but wanted to use the printable pin. I used the two original knob models, Cut and then merged them together.
I've just glued them together.
This is a holder for the Sparrows Sidewinder practice lock. this holder allows access to the side loading key pins, and allows you to keep the rubber cover in place.
This is a credit card sized holder for the Mace Picks sold by Sparrows: https://www.sparrowslockpicks.com/product_p/mace.htm The card is 0.85 mm thick, and should be printed in whatever layer height is suitable for your printer settings.…
Arrow head for Larp arrows. fits a Ø6mm shaft
Marrowshade is a collectible dragon bust, perfect for dark fantasy fans, D&D campaigns, or as a unique tabletop piece. About 6cm tall, Marrowshade’s eerie bones and gothic style make it a centerpiece with real attitude. Model details:…
Better working arrows for this model... > The arrows are sharper and penetrate targets more effectively! Print Settings Do not use supports. Print at a slow speed: 70% for PLA 60% for PETG. If you like the model, consider giving a tip to…
Made a simple wallmount for my carbonarrows. They have got 10.4mm in diameter (Roughly 0.4 Inches). Print 2 of them for a horizontal mount. Have fun. Print Settings Printer: Prusa I3 Rafts: Doesn't Matter Supports: Doesn't Matter…
Remix of existing model by TC . Arrows extruded from main body in order to support layer colour change in PrusaSlicer for non-mmu colour changes. G-code files have supports and colour change enabled. Matching Z-Axis model is here →…
I wanted a small case to hold the Sparrows practice lock. This is the first version and still might need a little modification. I help train and host LockP Pick Villages so I have several sets of the 2-5 Practice locks from Sparrow Lock…
You can print 2 of these and snap your arrows in place in order to make a very basic frame for them. You can also attach the bundles together using an extra set, and add another arrow as a handle!
Remix of existing model by TC . Arrows extruded from main body in order to support layer colour change in PrusaSlicer for non-mmu colour changes. G-code files have supports, colour change enabled and 2 objects. Matching X-Axis model is…
Acts as a hold-down if you happen to break one of the tabs. Simply clean up what was left of the tabs in order to leave a smooth surface. I used servo screws and drilled the holes accordingly. Once the screws are added it seats nicely and…
Is nock for fast archery for traditional wooden arrows. Adds severely to fun. 8.6 mm shaft width Yuo have to heat-alter the nock wings to fit your string (or use freecad).
a simple tool for squaring off arrows
I just added some arrows. I am using them instead of the W A S D.
This is a stand for the Arrows Viper Jet, designed by me. So this small jet can stay on the bottom of the flor or you can mount this stand with srews on the wall. You can print it in PLA, PETG or something equal. I printed with 3 lines…
This hold 6 Easton 400 FMJ arrows. The diameter of those arrows are 0.263". This should fit your standard cheapie quick detachable quiver on the market. I included a picture of the old one vs the new. Print it in TPU.
Friday Night Funkin Arrow Fidget
Small arrows are so easy to lose, so a refill is the perfect way to quickly make more. More info below on the toy itself
Simple Z-axis movement clip-on indicator with 3 arrows.
Wooden arrows TopHat® Assembly Tool/Tap holder wrench for 5/15 and 11/32 holds the The TopHat®Thread roughing tap securely so it can be twisted on by hand. Once printed some old bicycle inner tube ensure a solid grip around the tool…
Simple bow holder with 3 arrows for wallmount.
Light Up StepManiaX Side and Center Arrows! These models are part of a separate project I designed to connect my StepManiaX stage panels to these light up arrows to display which arrows I'm pressing while playing the game. You can find…
I would highly recommend printing this with wooden filament.
I remixed this model (https://www.printables.com/model/395229-e-stop-key-cap) by Adam Cook, I wanted one without the arrows in the mushroom.
Used to identify beginning and end of sleeve stitches in a knitted top. I made these after losing track of where I was and goofing up again with short row shaping on the back of my sweater. The diagram shows how I use them on a garment.…
I pasted Q508left and Q508right with some pieces of double-sided tape on a plastic sheet. There are holes to access USB and DC connectors in the left side. Material: PLA Support: No Nozzle Diameter: I use 0.6 mm
*** If you like the file please make your “ like ”. Every mark helps me to get a free roll out of Prusa. Thanks…. *** Uploaded with the permission from the designer named ZEE FLY GUY from RC Groups.com Thread link :…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8stmqTysuK3 Category: 3D Printing
I designed this simple cooling vent to be used on my Arrows Viper and without being scientific it does help keep the battery much cooler. Along with the vent I made a template to allow for a perfect fit. Simply hold the template where you…
This is a 3D Printable Upgrade to the Singer HD 4423 (I think it will work on all the 44xx line of sewing machines). This was just a minor tweak to the original design, as I wanted a visual reminder as to what direction I should move the…
We used these arrows for playing the board game "MicroMacro", which is an awesome detective game where you follow clues on a large line-art map. Marking clues is very useful when playing with multiple players. After using small D6 dice…
I can't pick my Kryptonite lock with the factory Sparrows DD pick because it won't reach far enough past the spinner disc to tension the core. This is a replacement for the tensioner that'll allow you get deeper and more easily pick this…
I wanted a cylindrical handle for a 0.015" Sparrows monkey paw, so I mocked one up in FreeCAD and printed in PLA (10% cubic infill, sliced in Cura). Hole fits a 6-32 grub screw, available in bulk for cheap at McMaster-Carr.
Timetable Board Use this timetable frame to decorate your school timetable and stay organized at the same time! Assembly 1. Create your timetable Download timetable_template.zip and open it Open timetable_template.xlsx Fill in your…
Choc keycaps with dots representing 0 through 9, a play button, and two types of arrows
Directional arrows with inscription LIBRARY (left and right) - 10 cm, 20 cm (two colours)
north east west and south arrows
Flat quiver for Ø6mm arrows, LARP
2 versions available for single color printers OR AMS MMU. This is an original piece but I'm sure it's been done b4. Single color version - change to black @ 1.8mm AMS Version prints face-down 2 color -------------------- Single color…
Teaching angular/rotational motion in physics, I was always looking for anything in my office to demonstrate rotation. I created this simple loop with four arrows -- it has been a huge hit with students. Use it to explain…
This model is useful to tranform bullethead arrows in blunt head arrows aerodynamics to be reviewed as main focus is printing without support WORK IN PROGRESS updates are coming V1 Released 57 grains if printed in flex + Easy to print…
Its the same as the previous spinning top but IT HAS ARROWS!!!
