321 modeli
Section 3: Catalogue of Significant Artifacts from Sector Ulysses, Site 23 3.7 Artifact VN-07-SU-23: Elaborately Carved Phallic Effigy Recovery Context: Artifact VN-07-SU-23 was recovered from Stratum III-b within Sector Ulysses, Site 23.…
Wydruk około 7,18 €–8,78 € nettoWstępna wycena jednego wariantu
cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
I belive during this time it is important to educate ourselves to understand how somthing exists in such a complex biosphere thats why i would like to share my Lab glove Box that i designed myself and i hope that there is somebody out…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
Se imprimen tres partes por separado: base, asa o manija y tapa. Luego de imprimirlas se debe pegar el asa o manija con la tapa. NO requiere soportes. Fácil para limpieza después de su uso.
Wydruk około 1,90 €–2,33 € nettoWstępna wycena jednego wariantu
Fuente de alimentación para laboratorios, realizada con un fuente de PC ATX. Medidas de la Fuente de alimentación. Alto: 85,50mm. Ancho: 150,50mm. Largo: 140,50mm. Hay un fichero stl. llamado CAJA_FUENTE_ATX_CON_3.EV.stl Este fichero…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Aperture Laboratories key ring. Use a layer height of 0.15mm Add a change of color in layers: 16, 18, 19, 20. Color goes in this order: -Black -White -Blue -Orange Printed on a Prusa mk3s+
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
I put the Aperture Laboratories Logo on the Topper. This is made in Fusion 360.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
(english below) Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör. Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG…
Wydruk około 19,90 €–24,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was annoyed by all cheap phone holders on the market so I just kept placing my phone below the radio. With the cover of the ashtray open, the phone kept slipping off at the bottom. With the cover open, it fell over at the top when…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
It is a laboratory table made of 20x20x1.5 aluminum profiles made of www.aluhobby.cz and connectors printed on a 3D printer. The table is equipped with 2 shelves 1000x500x19 mm. The table is used for mounting a small distillation column…
Wydruk około 5,44 €–6,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you annoyed that the perfect holder for you doesn't exist? Well, now you can assemble it yourself based on what you need. Not anything more, not anything less. This organizer is based on blocks you can slide into each other to form…
This is a remix of Arduino Case by 3DP . I've added a button to access the reset switch, removed excess material to make it slightly thinner, added a groove between the top case and lid to prevent any possible wobble, widen the tolerance…
Print Z=0,2 perimeter=5 infill=50
Aperture Science Laboratories – We innovate science! I like the overall aesthetics of the Portal games a lot. So, to fill a blank spot on a wall, why not use an oversized Aperture Labs logo? The logo This print represents the Aperture…
RUS: Корпус для самодельного лабораторный блок питания, на основе модуля XY6020L и импульсного блока питания. Корпус спроектирован специально для печати на 3д принтере без поддержек. Список компонентов: Регулируемый модуль постоянного…
The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…
Remix of the great GAZ66 model of Pfelpensson, here with standard box used in different modifications for maintenance/repair workshops, laboratories, field kitchens, medical service and many other purposes. Model is hollow with holes in…
Portal Aperture Laboratories Keycap printed with White and Black
6" Threaded Riser Extension for BORA's Centipede collapsible work stand system. Threads directly to work stand and raises worksurface from 30" to a more comfortable 36". Extension is compatible with factory attachments and fittings. You…
This is a 2x4 X-Cup bracket for the Bora Centipede. It comes in two parts that are easily assembled with a few light taps from a hammer or a mallet. If you're concerned that the post may back out, add a little bit of CA Glue (Superglue)…
This nut matches the spec used on Bora's Centipede expandable workbench system. Standard nuts are too tall and wide to fit with their 'p-top' and riser accessories. It's unfortunate that Bora makes it this difficult to replace a small,…
It' a Double P-top for Bora Centipede.
OVERVIEW This series of funnels is designed specifically with single use, or single material use in mind. The word ‘disposable’ does not conjure up positive thoughts in this day and age, however the intent is that they can be used for a…
Ersatzteil für OEM nummer 1J0823593C gedruckt in 0,15mm layerhöhe 31% infill auf einem i3 Mega S
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 14mm You need to cut a M8 thread and use 2 x M8 screws with hat, (file included) There are two different versions. Both work well, v2 minimizes…
A stencil of the Aperture logo from the Portal games designed to be used with fabric paint for my Chell cosplay
PC ATX low power lab power supply. Printing without support in 0.20 or 0.15 For the screws: 4x M3 of 5mm 4x 20mm wood 6x m2 4x molded nuts Electronic part: Voltage Regulator :…
Here is my take on the laboratory rocker, which is a laboratory tool/device used in laboratories for mild to moderately aggressive biological and molecular mixing applications. Please, note that no model herein should be used for…
These are scalable/parametric, hardware-compatible risers for Bora Centipede work stands. Bora sells 6" high risers, making the stands 36" high. However, if you use a sheet of plywood or a table top for the work stands, the working height…
This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…
Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).
Dialysis clamp for closing freaking dialysis tubes for protein purification. Print instructions So this is my first project ever. I tried to print a clamp in one piece that would work for unfolded dialysis tubes to save some material and…
I designed this extruder visualizer based off the logo for Aperture Labs from the video game Portal for my shiny new Prusa MK3. I didn't want to deal with support material, so it lays completely flat on the print bed. In order to glue the…
Surely you have a friend who likes the SCP Secret Laboratory game, this keychain is the perfect gift for him or her.
I break down sheet goods with a track saw on a Bora Centipede using a pocket-holed 2X4 frame, clamped on the Centipede, with a foam board on top. The 2X4 frame is unwieldy and difficult to clamp down. When I looked at the Bora top, I had…
This model is compatible with the lego system.
A case for a buckconverter/regulated power supply with usb connector. There is also one magnet on either side for easy storing of for example a screwdriver. Supplies: SK60 SK120 DC Buck Boost Converter = Aliexpress Female Barrel…
I modeled this to allow me to make mounting dual tops side by side easier. I did not add the 4 slots to use the hanger accessories. If there is a desire I can add them in. I printed in PLA with the top surface down using some supports on…
Simple corner and straight adapters that hold a 4x8ft sheet of material in place, helping in keeping the table square. It possibly works on smaller tables with smaller sheets, but it has not been tested yet. No supports needed. Just…
This model is compatible with the lego system.
It fits specifically for the Blaupunkt Palma 190 BT radio. The internal dimensions of the frame are 178 x 100 mm. Printed with black PETG on Bambu Lab P1S (0.08mm Extra Fine @BBL X1C preset). Infill - 20% Gyroid Wall Loop (Number of…
TinyMtn Free Pack 10 - Andes This is a package with sets of 3D model files for four notable mountains in the Andes. Aconcagua, 6962 m / 22,841 ft Volcán Chimborazo, 6267 m / 20,561 ft Nevado Huascarán, 6768 m / 22,205 ft Ojos del Salado,…
250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders. I remixed this 250ml Conical Flask Holder , making the following changes to…
Dexter from Dexter's Laboratory Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
Print 0.2mm layer height. No supports are needed. 10% infill.
Holder for 13 vacutainer vials, easy print, no support needed
The ultimate STACKABLE laboratory organizer! Simple to print, customisable, .step and .shapr file incuded. Designed in Shapr3D. Print with PLA with 0% infill. Hope it works and helps! Happy printing, thanks for downloading
Painting standoff (or painter's pyramid/cone) insert for BORA Centipede system. Fits in to factory "P-Cap." Its function is pretty straight-forward. Just set the piece you are painting directly on to the Centipede frame and go to town.…
Hello, i dont provide the sphere because of the logo, just create a Geosphere - Radius 120mm. Remember! just in case, if you scale down your sphere and the atlas-stand think of the dimensions of the cup for the cards.... because he will…
A GL18 cap for laboratory test tubes and especially useful with the 4-port GL80 caps for Duran bottles. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic ABS Category: Engineering
Maker robot as RoboRally figure Edit online: https://www.tinkercad.com/things/1macLwE30a5
Versatile modular laboratory stand ... more info now only czech (in e-Mole magazine http://www.e-mole.cz/cislo/e-mole-c-7-8 ). English BOM (on image 3): Bitbeam Holder (3D printed) - 1x Vertical Rider (3D printed) - 1x Horizontal Rider…
When handling samples obtained from difficult (environmental) matrices (e.g. manure, dirty surface swabs, or water), Nucleic acid extraction and purification often becomes problematic. Scaling up during epidemics or environmental…
just used the figure as RoboRally figure Edit online: https://www.tinkercad.com/things/bbvRETUbozR
Dee Dee from Dexter's Laboratory
GRIDFINITY laboratory organizer. 8 types. Use also this or other gridfinity grid base. Check also my other design, stackable laboratory organizer . Hope it helps, and happy printing!
Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.
I designed these two vial holders to maximize practicality and efficiency in the lab. I currently use them, and so do some of my colleagues. These holders can accommodate various standard vials: The larger holder can accommodate up to…
I really liked the “no hardware required design” I saw from JeremyKMac , so I remixed it for a Bora Edge Clamp Saw Guide. I printed on Prusa Mini+ in PetG with no supports just fine. Hope this is useful for those who have the thinner Bora…
Print with something a bit more heat resistant than pla (mine is pte-g) and put D profile window seal trim in it and it will fit your car.
A wall mount for measuring and laboratory cables. The distance between the arms is 4 mm. Easy to print!
A car stand for the Slash 4X4 Ultimate rc car created by the F1NESSE team from the Netherlands. Not sure if there are any other traxxas vehicles compatible
This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…
Printed Parts Assembly Attach the Base Screw : Begin by screwing in the plastic screw underneath the small base section. This extra support is here solely to provide more strength. Select the Right Peg Size : Choose the pin sizes that…
Dexter from Dexter's Laboratory
Riser Extension P-Cap for BORA's Centipede collapsible work stand system. Design and layout matches factory dimensions, and improves upon it. This "P-Cap" design threads on directly, without the need for an additional nut or tools to…
For the dash vents. I suggest printing it side up with supports since the support side sits inside the dash anyway. Mirror it for the opposite side.
A simple wall hanger/hook for the Bora NGX Clamping Straight Edge Guide. Prints on the side, I recommend using ASA/PETG or another filament with a good amount of flex.
Knurled insert for BORA Centipede system. Fits in to factory "P-Cap" to provide a gripping surface for worktop. I've seen many complaints about the P-Cap being slippery, so it's difficult to keep worktop from sliding around. This little…
DC-DC regulated laboratory power supply and meter made with an standard adjustable power supply module.
I bought a few of the Bora Wood Rack kits from my local hardware store to store lumber in my garage. Unfortunately, I lost some of the wall spacers between purchase and installation, so I quickly modeled one so I could make replacements.…
Riser Extension Cap for BORA's Centipede collapsible work stand system. I have seen a lot of complaints about the BORA P-Cap being too slippery to keep table top in place, so I have included both a SMOOTH and a KNURLED design. Rubber…
Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…
VW BORA HUB CENTERING RING 57.1-63 GOOD
Breadboard holder with laboratory plugs Breadboard:…
I wanted extra panel supports for my Bora Centipede work table, so I created three versions. In the pics, you can see the original Bora support along side the printed version. There are 3 versions, one with a flat top surface, one with…
The Laboratory Mouse Monument is a monument in Novosibirsk's Akademgorodok, located in a park near the Institute of Cytology and Genetics (ICG) of the Siberian Branch of the Russian Academy of Sciences. The monument was unveiled on July…
Ring adapter for 4 door speakers. Door bots with 5mm@10mm. (158mm standard door fixed bolts) Speakers fixed with drywall 5/8 (143mm diameter) Standard fix for 6in speakers.(not 6.25 or 6.5mm) ... Adaptador para VW GOLF, Jetta, Bora para…
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version you might also be interested in my…
Stativplatte für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s). Die Platte ist 180 mm lang, damit sie auch auf den Prusa Mini passt. Das Model auf dem Foto wurde mit einer 0,6 mm…
Aperture Laboratories Plate that covers the USB port on the Creality K1.
PLA, infill 15% no support For one base, you need 21 sticks. Stick are printed horizontaly for endurence. Tolerance: holes are 3.3 mm width, stick have 3 mm
Vial or test tube holder for easy filling and mass readings. 4 different angles available for ease of use, various vial sizes, and convenience. Warning: Check MSDS of chosen print material and any chemicals present. Due to the layered…
Rock Bands - Bon Jovi - Richie Sambora 3D printable model.
HAWKINS NATIONAL LABORATORY SIGN Category: Signs & Logos
Dunstabzugabdeckung für Bora Pure Induktions-Kochfeld. Kompatibel mit Bora S-Pure, M-Pure, Pure empfolenes Filament: ABS
A small charm with a loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of your…
Connector for BORA NGX/WTX Edge Guide track system. Manually drill out third hole, as alignment may vary This is a work in progress, as I am working on a series of designs and adapters for BORA NGX & WTX Clamp-Edge system compatibility.
Vent cover with lamels, fits like glove. Supports only required for side spike triagle holders. Looks great and works wiVent cover with lamels, fits like glove. Supports only required for side spike triagle holders. Looks great and works…
Hi All, The first project I built back in 1990 when I graduated with a BS in Comp-Eng was a power supply. It has served me well all these years, but it was limited. So I decided on a new 3D printed update. I like Sebr's power supply…
Various shapes of the P-Top. Fits well enough with my settings using ABS @ 0.6nozzle/0.3mm LH. Did not optimize to save filament so it does use a good chunk of material. Recommend using a brim and printing in orientation in the…
This model is compatible with the lego system.
front mount 2 usb breakout boards . one model is flush the other protrudes 3mm printed with 3 walls and 15% infill i recommend 5 walls for the models with no heat-sets to get stronger threads
Abstract: The implementation of automation has already had a considerable impact on chemical and pharmaceutical industrial laboratories. However, academic laboratories have often been more reluctant in adapting such a technology due to…
Organize your lab bench with this universal, multi-tier tube rack designed to fit a wide variety of laboratory tubes and vials. The stepped layout provides easy access and clear visibility for each row, making it perfect for busy lab…
Crossover to equip a tapered joint NS14 (Normschliff 14) with a glass thread GL14. I printed it quite often in PETG and all are still in use. No support needed if printed upright - therefore the conical shape between the two connections…
A few days ago, I reached for a sample in my lab and I ended up knocking over lots of vials in the process of trying to get them organised. Never again! These organisers are secure enough to keep your precious samples safe. I also…
