Źródło oznaczyło ten model jako treść 18+.
- Pobrania
- 1920
- Polubienia
- 134
- Ocena
- 0
230 modeli
Update: I've got a newer version to print parametric support-free breast forms! Check it out here! Update: 9/7/25, V2.2 Here's a slightly wider, but less taller version of the form that also works without supports, and came out rather…
This model is compatible with the lego system.
Keep pumps reservoir organised with this minamalist holder. Printing is fine with 2 walls, though i recommend 3 for the top, and a 0.12 layer height so the slope has a higher resolution. Ideal for storging the reservoir in the fridge…
This OpenSCAD file enables you to create breast forms in various sizes to suit your needs. Simply load the file up in OpenSCAD. (I recommend the nightly builds , which render super quickly) Features include: Fully customizable with a few…
Simple storage solution for Motif Medical (or similar-sized) breast milk storage bags. I have printed multiple of these in PETG with .6mm nozzle at .28 layer height. It includes bridge support for the opening at the bottom, they should…
Update: I've got a newer version to print parametric support-free breast forms! Check it out here! This is a basic breast form design that I use to shape and fill fabric forms, but can also slip into a bra as well! Print like a bowl,…
Awareness Earrings I print all my earrings and keychains with a .2 Nozzle Layered. No AMS/MMU/Ace Needed. Just color swap at layer. Can be made into a pendant and/ or Keychain by scaling up. Check out my large selection of earrings .…
Design Concept The design is round in shape and has a print in place handle that prints on the top of the piece with a print in place hinge. The hook for the locking mechanism is connected via a print in place hinge as well. I designed…
Two variants. Detailed and simple.
I couldn't find any commercially licensed dummy 13 chests with breasts, so I sculpted some in Blender. 3 bust sizes available. Printable without supports by placing the shoulders on the build plate. For best results, use the corresponding…
This model is compatible with the lego system.
I made this modular tree specifically because my existing tree and every other one I can find requires careful tetris every wash to fit all the highly-irregularly shaped odds and ends. The 5-arm part fits pump flanges, as well as small…
sexy cheerleader with big breasts
Batman 89 - Breast Plate Symbol, like seen in the first Batman Movie with Michael Keaton 1989. I created also the Movie-Logo from 89, the Batman & Robin Logo and the Batman-Forever Logo.
This model is compatible with the lego system.
This model is compatible with the lego system.
These are 3D printed versions of Kelly Lollard. https://kellylollardesigns.com/blogs/news/breast-cancer-ribbon-free-svg?_pos=1&_sid=0699f9e50&_ss=r Imported the dxf and modified. Print in pink. of course. Category: Accessories
We needed a storage system for our freezer chest full of Medela breast milk bags so I created this stackable tray. The bags we use are approximately 105mm wide which is the most important measurement if you want your bags to fit perfectly…
A drying rack for storage bottles of breast feeding pumps and/or baby bottles. STLs are included for the Medela storage bottles, used amongst others on the Medela Symphony and the Medela Swing, and for the Philips Avent Natural line of…
breast milk bag storage bin for freezer, designed for momcosy pouches which are 100mm wide i designed it to hold vertically even if it has 1 pouch inside it. printed with PLA without supports
This model is compatible with the lego system.
Goblin Slayer breastplate. Includes front back and buckle. Fusion 360 Link (Front): https://a360.co/2Mcl2em Fusion 360 Link (Back): https://a360.co/2JLytR2 Extras Needed: 2 x Parachute Buckle 3/4" Strap Black from Joann Fabrics 8 x ADA…
Feeding a newborn can be quite taxing and the last thing you want is spilling precious breast milk. I created this bottle holder for my wife so she has an easy to reach and safe place to set down the milk bottles when she was done. I…
My wife wanted a system that allowed the oldest milk to be used first. We have been filling other containers, but you still have to rifle through them to look at all the dates. There are similar units for sale for $30 each. It was…
This model is compatible with the lego system.
Double-breasted dovetail joint partially embedded, teaching aid for joiner and carpentry in secondary schools. Oboustrabbý rybinový svlak částečně zapuštěný, výuková pomůcka pro obory truhlář a tesař středních škol.
Źródło oznaczyło ten model jako treść 18+.
This model is compatible with the lego system.
The carrying case that comes with the breast pumps isn't very useful day-to-day, and they're round so they don't really stand upright unless you lean it against something. If you lay it on it's flat side, milk will spill out. So I made a…
This is a remix of a spectra bottle holder that interfaces with a spectra breast pump with friction. I found the original model provided a firm and snug fit but we wanted to add an extra cup to hold some pumping spray. I also removed the…
The models are for Version 2. This made the assembly easier and allows for different width bags. You will need one holder and two rails. Assembly is done with 4 #6 x .5 inch flat head screws.
Remix of the system made to enforce FIFO on breast milk bags and prevent clutter in the freezer. It was designed for a 6oz Lansinoh bag of milks. Fixes bottom plate not connected properly in original design.
This piece allows you to give any mini-figure breasts. It slides onto a mini-figure's neck like a backpack or cape. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: Yes Resolution: 0.12mm Infill: 20%…
This handy device holds breastmilk bags and a marker to your fridge with the magic of magnets. It will fit both standard as well as Motif bags. Although I would recommend the "marker on left" version for Motif bags. It prints with no…
I added a hose spool to zeb's excellent Spectra S1 Plus two bottle adapter to allow for cleaner carrying and storage. This bottle adapter has the flat side for Spectra's re-design. The print pictures was printed in Soleyin PETG with 15%…
105x183x130mm 4.2/7.2/5in fits on the bottom shelf of our freezer, could be used for anything I suppose. Prints without supports just fine on my printer.
Simple tool to close and open the duckbill valve for Momcozy M9 breast pump. After a few cleans and sterilisations the mechanism gets a bit stiff, making it uncomfortable to close and open by hand. This tool just slots on top and provides…
BREAST CANCER RIBBONS VALVE STEM CAP FITS AUTO AND BIKE SCHRADER VALVE THREAD PERFECT FIT NO SUPPORTS PRINTED WIH REVO 6 .15 WITH 15%INFIL STANDARD SETTINGS
I created this model to replicate a part that was broken on my wife's willow 3.0 breast pumps. Now I get to be her hero and she can never call my 3d printer useless :) I printed this with the following settings: Filament: Inland PLA+…
Breast Cancer Faith Cross Earrings I print all my earrings and keychains with a .2 Nozzle Layered, No AMS or MMU, Needed Just color swap at layer. Can be made into a pendant and/ or Keychain by scaling up. Want to use a different color,…
Medela Breastmilk bag storage. This is a heavier duty storage solution. Step and Fussion360 files included Inside Dimensions W 117mm D 172 mm H 202 mm. This is inspired by…
Shield to attach to a Medela breast pump. The company-manufactured shields do not cater to all shapes and sizes, so a custom print was required. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: No Supports: No Notes: Print with…
Because of how the customizer works, you'll need to download this and the original file( http://www.thingiverse.com/thing:484029 also included), change the line import("path\to\breast\cancer\ribbon") to wherever the file is, and then…