536 modeli
A nice and quick pot/planter for your lovely plants! they will love it We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing!
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
Meet Mini Cactus Buddy , the tiniest desert plant that never needs watering! 🌵✨ ✅ Adorable & Tiny Design – A fun and quirky desk buddy ✅ Perfect for Desks, Shelves & Collectibles – Small but full of personality ✅ Lightweight & Quick Print…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
2 pieces so you can print in separate colors with a pin and hole that should be a tight slide together depending on the tolerance of your printer. A dash of glue should hold it together forever!
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Easy to make a cute Cactus keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This decorative lowpoly cactus and pot box can be used as a jewellery display and storage. It prints in two parts with no supports needed. In Prusa slicer i added a filament color change between the soil and the cactus. Note that you may…
Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu
Description: Meet the Prickly Pen Pal , a fun and quirky cactus-shaped pen holder that brings a touch of the desert to your desk. Designed to organize your pens, pencils, and other writing tools, this playful holder adds charm and…
Wydruk około 4,71 €–5,75 € nettoWstępna wycena jednego wariantu
Es un bonito carrito decorativo. Para colocar una pequeña planta o para lo que se nos ocurra o simplemente como elemento decorativo. Espero que os guste
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
My cactus was all bent over, but thanks to this support I was able to lift it up again so it can grow straight. Height of the pole: 180mm (20mm of drill). Diameter of the ring: 100mm. A drop of glue is enough to join the two parts. In the…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Cactus pot made from Stretch Cat: https://www.thingiverse.com/thing:974565 Just scale to the size you want. Altered so it can be printed with minimal supports, but does require them. I put gauze over the hole in the bottom of the pot to…
articulated flowerspot 0.20 layer 15% infill no supports
Thats just a recut of the cactus model, as i needed a fast printable vasemode print for some vases for my gf. And here they are! Print instructions Category: Containers Print Settings Printer: CoreXY Hypercube Evolution Rafts: No…
Egg-shaped puzzle container with “cactus like” ribbed pattern on the outside. This maze is not complex, without too many long dead-ends; but there are no external indicators of where the “pointers” in the maze are located. Designed to…
Looking for a fun and satisfying fidget toy? This Cactus Clicker is the perfect desktop companion! Perfect for fidgeting, stress relief, or just adding a touch of green to your setup! With multiple customization options, you can mix and…
31-May-2023 updates: Added a 4-arm cactus option. It has a slightly narrower top to the stem than the 2-arm version to allow rings to sit slightly lower on the stem. Each of the 4-arms are slightly different in diameter to each other.…
Hi! Download and print this cool design. Original by moldesgroot
Did you know that some cacti have a natural internal Voronoi-like skeleton? ( Check it out. ) This Voronoi-style saguaro cactus was inspired by that inner structure. And what southwest motif would be complete without a cow skull? I…
They can be used combined with each other or not. Printed with 0.4mm nozzle, 0.15mm layer height and 20% density Added freecad file in case you want to modify the design Se pueden utilizar combinados entre sí o con un sólo motivo. Impreso…
to test the tolerances you have to print the test piece and if necessairy scale it to your needs if you want some weight use the pot with the compartment so you can pause the print and put some rocks or sand in
Flower pot in the second picture. The pot can be inserted into any flower pot you would like, that's why there is only a basic one. The diameter of the pot at 100% is 6cm and the tolerance on the pin is 0.2mm. To make it fit into the…
My Cactus inspired submission to the "Catch all tray" contest. My design is a desert theme cactus, which a tray made to look like sand dunes and a little Cactus in the center for hanging thing from. everything is printable without any…
Bring a touch of the desert into your home with the Cactus Vase ! Inspired by the iconic shape of a saguaro cactus, this playful yet stylish vase is perfect for adding a little greenery to your space—whether with dried flowers, fresh…
Watch here: https://youtu.be/xbQJkHzL4nQ The Cactus is finally joining the ranks of plants ready to defend my shelves against the incoming Zombie invasion. It's up there with the Sunflower and the Peashooter. Chomper will be joining soon!…
Jose el Cactus! Gorgeous low poly model with cap, sombrero and glasses. Assembly of static parts: glue one Joint between Base_top and Base_bot glue one Joint between Cactus_no_eyes/Cactus_w_eyes and Mustache Assembly of dynamic ports:…
Cute cactus to enhance your place! Be creative by painting it differently!! Feel free to use the .stl file to change printing settings and find those which fit your needs. Only inside supports needed.
A blank, matte-white cactus model designed for creative expression. With its clean, minimal form and playful silhouette, this DIY collectible brings desert charm and a touch of whimsy—perfect for painting, gifting, or quirky decor.
A multi material remix. This is intended to be printed as one part on a multi extruder system, not printed in parts and assembled. Remixed from: https://www.thingiverse.com/thing:2398762
Make this cactus for holding your toothpicks or decorating your home. The cactus is empty inside, so it's easy to print. But be careful of your toothpick falling inside it. You also can keep the rest of your toothpicks in the planter.…
use some hooks are you are good to go, mirror the model for symetric pair textured plate is an advantage
Cactus Toothpick Holder Add a touch of nature to your table with this fun and functional Cactus Toothpick Holder ! It features a green cactus top with holes to hold your toothpicks and a brown pot base to keep everything steady. 110g…
A watertight pot for decorative presentation of your beloved plants. Printing instructions for a watertight print: 3 perimeters, 15 % Infill. No Supports needed. PLA will be fine. The design is scaleable too. Happy Printing! Changelog /…
Molde para hacer maceta ideal para hacer con los chicos parametros de impresion pla 0,2 altura de capa hasta 0.4 relleno 25% cubico
make sure you print the planter and cactus the same size and infill to make a perfect fit
Decorate your space with this unique cactus-shaped pencil holder! Perfect for adding a touch of personality to your desk while keeping your stationery organized. It's both functional and stylish, making your workspace more enjoyable.
The Cactus Caddy is desk organizer delivered straight from the desert! Escape the cold winter weather or embrace the summer heat by printing this file! Either way your desk will feel a little hotter now with this 3D print! This desk…
+++ Cactus Vase +++ The shape of the desert cactus inspired me for the pattern of the vase. Happy printing! Source: https://de.depositphotos.com/62101589/stock-photo-arizona-desert-cactuses.html **Print Instructions** Supports: No…
Magneti acquistabili su Amazon:…
This is a scrunchie holder thats shaped like a cactus. My fiancee asked for a scrunchie holder and loves cacti, so I made this for her. She loves it and its very easy to print. The pot is designed to hold it and provide some counter…
Printing Instructions Use your slicer's fuzzy skin feature on the cactus to make it look like the one in the picture! 0.2mm 15%+ infill I used green, orange and lilac PLA for the one in the picture, but you can use whichever you want.…
A Western Diamondback rattlesnake lounges in the shade of the Sonoran desert's quintessential Saguaro cactus. This design is intended to be printed on a resin printer. The details – particularly the snake -- are too fine to be printed on…
A design of a cactus in a pot with holes to put toothpicks in, which represent spikes on a cactus. Recommended print with no supports and any infill, however I printed mine with low infill. I also printed mine in ABS because if its in the…
The best part? The eyes are separate pieces, so you can easily print them in any color you want and just snap them in. No painting required! Features: Easy to print: Optimized for FDM printers. No supports needed! Customizable: Print the…
I made a little cute cactus. This model needs no supports and no assembly. Printed with 0.16 mm layer height. (0.20mm is fine). 10% infill Gyroid. No Supports. 💰Commercial Use💰 Want to sell prints of my models? Subscribe to my Patreon to…
A holder for your earrings in the shape of a cactus. Printed in two pieces that snap together. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: 0.15 Filament: Prusament, BALCO PLA Opal…
I designed it as a pot cover but with a few drain holes drilled it might act as pot as well. Requires some supports, especially under the belly.
doesn't need supports. this can be printed with filament change
This is a little tea light / votive powered lamp shaped like a cactus. You twist the cactus to turn it on. Here's the lamp I used. They're all over the internet:…
I created this chess set as part of a school project. At first, it was quite difficult to come up with an idea, and I ended up drawing a lot of inspiration from the set designed by Elle STVDIO (elle.stvdio). However, I wanted to make it…
Set 4 Quadretti cactus vettoriali.
Another geometric pot, i have modeled in blender
There are two versions of the base--one with added weights and one without-- the cactus fits on both. The weighted base adds 5mm to the height of the assembled model. IF PRINTING THE WEIGHTED BASE, CHECK THE PDF FILE FOR IMPORTANT…
Cactus plants - wall art, easy to print
Cactus Jack Logo Plague
This is a cactus desk organizer designed to hold pencils or other office items. The flowers are printed separately and glued to the main model. No supports needed!
Cookie cutter in the shape of a cactus.
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
This expandable fidget cactus is inspired by the iconic cactus shape and features a segmented, articulated design that allows it to smoothly expand and contract. The playful form combined with satisfying movement makes it perfect for…
A cactus shaped cookie/clay cutter. (Not recommend for food) Print Settings Printer: Biqu B1 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Your choice Your choice all Notes: Made to be printed with two walls at original…
Meet Cactus Buddy , the cutest little plant that loves to hold your drink! Each “leaf” of this friendly cactus turns into a colorful coaster — perfect for a fun and tidy kids’ room. Made to look like a playful potted cactus, it adds a…
Loving this model. My prints: Scales: 100%, 150%, 200%, and 300% scale prints in photos 0.2mm resolution 10% infill No supports (only 300% scale printed with supports but I doubt it was needed) Filaments: Amazon Basics Silk Blue PLA…
Boo ! Cactus planter Appreciate my work ? buy me a coffe https://www.paypal.com/donate/?hosted_button_id=9EL8CEDVY28DA thank you and happy printing
- Remixed desk organizer cactus for my hamster to use as a house. Worked great and she loves it ! I basically just cut a hole in the top part of the original model. Remixed from https://www.printables.com/model/117068-the-cactus-caddy…
I scaled the original woven planter file up to 120% (100mm tall) , but even if you don't this should still work. The cactus will just be larger in proportion and not sit as deep in the planter. The base piece can be printed in the…
A small, nice and quick pot for your lovely cactus or other small plants. Happy printing.
Disguise your tissue box to look like a cactus plant in a pot! Tissue looks like a flower. Designed for two colors with a simple layer change. Set color change at 73.9 or higher. Two options of style of planter included. Full size is 8" x…
A cactus with articulated dangly legs. No supports necessary.
Simply spiral vase aquarium plant
🖤 The Honest Shelf - Modern Art Decor Collection // Vol. 12 🤍 Level Up Your Plants with Desert Vibes ✨ A sleek, 2D-style cactus stake designed to bring a bold, graphic aesthetic to your real or artificial plant pots. 🌵 Overview 💡 Part of…
I created this for my daughter’s birthday after looking through a lot of models online and not finding one to fit the bill. The cactus and flower can be printed separately. The flower pops into a hole on the top of the cactus. It can be…
size: 58,9 x 83 x 16 mm
I design this cactus coasters (pinterest inspiration https://www.pinterest.es/pin/622481979769054580/ ) This project was printed using @geeetech3d Dual Silk PLA gold+red(planter) black+red(soil) gold+black(coasters), @crealityofficial K1…
Searching for a conversation piece that combines a drink coaster and holder in a interesting way? Look no further! Try this Cactus Drink Coaster set, when you can build up a cactus of all the Coasters pieces. The coaster set seen in the…
Just a sassy lil cactus! As scaled, this can be used as a tabletop miniature and fits on a medium sized base, but feel free to rescale it as you please. No base is included, and is only shown for relative scale. (1 inch / 25.4mm diameter)…
Terracotta pots are porous, meaning that they absorb water from the soil and help it dry out a lot quicker, and also let it breathe better than plastic pots. This is great for cacti, succulents and other plants that want good drainage and…
🌵 Cactus RGB LED Lamp – 12V Light with IR Remote A decorative cactus-shaped lamp designed for use with a 12V RGB LED strip and IR remote controller . This project is easy to print, easy to assemble, and makes a colorful addition to any…
A 3D Printable Honeycomb Planter, designed in Fusion360. Print time: 4.5 - 5.5 hours Size: 9.5 x 6.6 cm (diameter x height) Weight: 65 grams If you have questions, please let me know. I am happy to help. Happy printing 3D Printing…
This is a simple cactus flexi print. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: Hatchbox PLA Glow Category: Toys & Games
🌵 Cactus Drawstring Bead – A Little Desert Charm! 🌵 Add a tiny touch of the desert to your accessories with this adorable cactus-shaped drawstring bead ! Featuring a color design , it prints in green for the cactus and brown for the pot ,…
My print details: 0.4mm nozzle 0.2mm resolution Printed with rafts and supports to support the brim of the hat (not supported in the head opening of the hat) Filament: Amazon Basics Black PLA (hat only) 200% scale for the hat (and cactus)
When we buy a succulent/cactus from IKEA or Home Depot, we put the plant into another planter/pot and get rid of the one that comes with it, this Nice neon-like lamp can be used as stand-alone or BETTER as a part of reusing project. Just…
Self-watering plant pot 🌵💧. One of the 2 arms of the cactus can be used to give water to the plant and the bottom of the vase can hold water (I tested and the water doesn't come out!) Design The vase is composed of 2 parts: the green vase…
This cactus can holder features small raised dots resembling cactus spines, a ”low poly” handle, and a cactus flower. There are two versions. One with a can opener at the bottom of the handle and one without. Great for novelty collectors…
A trendy set featuring cacti and succulents in stylish geometric pots. Perfect for a modern boho look. No watering required! Prints easily without supports.
For this I was inspired by the colorful adobe and stucco houses in my neighborhood in Southern AZ. I made 3 slightly different house models and some variations on the doors and windows, so if you want to make a whole colorful cactus…
🌵✨ Cactus Fairy House – Desert Magic in Miniature! ✨🌵 Bring a touch of whimsical desert charm to your garden or shelf with this spiky yet enchanting Cactus Fairy House ! Designed to resemble a classic saguaro cactus with thick arms and…
A jewelry cactus divided into two pieces to be printed on the A1 mini. The two pieces can also be glued together, but there is no need to do so. Let me know in the comments if you want a model with the plate and the vase separable.
Self-watering flower pot for cactus and succulents
I wanted a mini cactus pot so decided to make interchangeable versions and a stand...enjoy!
Inspired from a vinyl graphic. Could be used as a magnet or key chain.
