850 modeli
Customized Ford Pick-up Hotrod Frame based on 1932 Ford Model B Pick-Up and chassis parts used from model A. Powered by V8 Ford 427 SOHC engine with racing slick tires. Parts are optimized for supportless ease print. Keep the orientation…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of "Tool Holder for Original Prusa Enclosure" by Prusa Research. To be mounted on the front right corner of the enclosure. Features: Four SD card slots Eight 4.25mm dia. holes Two 10mm dia. holes One 7mm dia. hole One slot for…
Wydruk około 4,86 €–5,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is very small coin to shopping carts with diameter of 24.5mm , tested in Czechia shopping carts, but feel free to use it anywhere else . Because of its small size , you can print it in literally few minutes. Printed without support…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Customized table chair leg cover and for Ikea LIATORP The robot vacuum cleaner ruined the legs of my ikea table. I used the " leg cover 2 " model because it matches my decor but if you are distracted I made the same legs inspired by road…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
Customized version of https://www.thingiverse.com/thing:2404850 , with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With…
This is a customizable silverware holder that fits your specific silverware like a glove. No more sloppy generic buckets. As an added feature, it can stack with other gridfinity modules to make even better use of the drawer space. Note:…
In the original model there were several wall protrusions that I fixed, and I changed the number of hot ends (4x) and slots. I printed with 0.2 layer height, 2x walls, 4x bottom, 4x top, with 15% gyroid infill using Inland PLA Tough. Let…
Showcase personalized automotive style with this 3D printable STL model of a Customized Mazda Miata MX-5. This tuned sports car model is perfect for automotive enthusiasts and personalization fans looking to display their passion for…
Cosplay Mask – Inspired by "Scream" (Ghostface) Note: Models labeled with the “Preview” prefix are meant solely for 3D viewing. These files are not suitable for printing, as they are low-poly and unsliced. All required printable models…
Customized version of https://www.thingiverse.com/thing:3682990 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3682990 Instructions Using the following options: ignore_this = 0 gear1_teeth = 12…
Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 100…
Customized version of http://www.thingiverse.com/thing:881114 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: platform_width = 145 platform_depth = 145…
'Making of' video: https://www.youtube.com/watch?v=OO5BM0G7YQQ I have had Asthma my whole life and always have my asthma inhaler near by, so I decided to customize the cap, do something fun with it. I call him Darth Inhaler! I hope you…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 10 textstring1 =…
Showcase personalized automotive style with this 3D printable STL model of a Customized Toyota Supra. This tuned sports car model is perfect for automotive enthusiasts and JDM fans looking to display their passion for unique modifications…
This is an extension of the set introduced by Customized Sanding Sticks with Labels ( Thanks Fuchsr ! ). In order to make the set on the included photo you can e.g. purchase set(s) over here…
Customized version of https://www.thingiverse.com/thing:53854 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=53854 Instructions Using the following options: diameter = 10 length = 150 throat_angle = 10…
I designed this holder to hold both 100% scale sanding sticks and 122.3% scale sanding sticks, more on the 122.3% scale later, the holder will hold a total of 16 sanding sticks, the original size in the front, and the larger one in the…
Customized version of https://www.thingiverse.com/thing:1236562 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1236562 Instructions Using the following options: $fa = 1 $fs = 1 bone_height = 5 pet_name =…
Customized version of http://www.thingiverse.com/thing:62800 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=62800 Instructions Using the following options: gopro_ext_th = 4 gopro_ext_len = 20.7…
Customized version of https://www.thingiverse.com/thing:2482372 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2482372 Instructions Using the following options: name = Jesus font = 8 textSize = 30…
Customized version of http://www.thingiverse.com/thing:476127 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=476127 Instructions Using the following options: hex_border_width = 15 border_width = 20 height…
Recreated in Fusion360 based on original design by @80am33. Included a version with names, so you can customize it in Fusion360. Enjoy!!! Recriado no Fusion360 baseado no design original do @80am33. Inclui uma versão com nomes para que…
Customized version of http://www.thingiverse.com/thing:1227374 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1227374 Instructions Using the following options: circular_pitch = 90 pressure_angle = 28…
Customized Plant labels for herbs / other plants. Each one bears the shape of the relevant plant. I didn't include the text in the models so that anyone can just add that in their slicer easily in their own language. Multi color is easily…
Customized version of http://www.thingiverse.com/thing:476127 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=476127 Instructions Using the following options: border_width = 20 lenght = 100 hex_radius = 5…
** Preferred material: PLA Pro/Pro PLA+/PETG ** Use your 2" filter ring with my dew shield for your Seestar S50 telescope. I have designed a filter ring with an adapter that can fit my customized dew shield. The dew shield has an inner…
I use a couple of these to hold the door on my 3d printer enclosure. Customized version of https://www.thingiverse.com/thing:2187167 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2187167 Instructions…
Highwayman from Fallout 2, styled as a pre-war vehicle. Wheels in this case are donated from 1970 Chevelle Super Sport wagon pictured behind it in the second photo. Recommended remixes: Highwayman: Post war. Redo trunk and make thing…
Customized version of http://www.thingiverse.com/thing:267879 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=267879 Instructions Using the following options: bolt_type = M6 nut_trap = no length = 35…
Customized version of https://www.thingiverse.com/thing:193647 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=193647 Instructions Using the following options: type = bolt head_type = hex drive_type =…
This stand is designed in a way so it can be printed without supports. Enjoy presenting your baseball on a stand of your team of choice or without a team logo!
Customized version of https://www.thingiverse.com/thing:57647 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=57647 Instructions Using the following options: plate_width = 1 plate_size = 0 1st_plate =…
Customized version of http://www.thingiverse.com/thing:6544 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=6544 Instructions Using the following options: distance_between_axels = 60 gear2_captive_nut_h =…
Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 10 platform_width = 100…
Customized version of https://www.thingiverse.com/thing:3483642 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3483642 Instructions Using the following options: cablediam = 4.8 lablength = 30 labwidth =…
This is a socket for the bolts/screws of the “customized sanding sticks with labels.” Using this, you can tighten the screws without tearing up your fingertips or printing entirely different screws. I've included the blender file if you…
Customized version of https://www.thingiverse.com/thing:1763508 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1763508 Customized funnel to fill Ancefine Precision Tip Glue Applicator Bottle,30ml found…
Customized version of http://www.thingiverse.com/thing:1227374 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1227374 Instructions Using the following options: height = 4 spacing_between_objects = 5…
I used 3 mg995 servos and 1 sg90 in the gripper to power the arm. Used M3 screws to assemble everything. After adjusting the design I printed it in normal infill settings of 15-20 and haven't noticed any issues.
Customized version of http://www.thingiverse.com/thing:45117 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=45117 Instructions Using the following options: Knob_Type = 1 Rosette_Offset = 1 Knob_Thickness…
Customized version of https://www.thingiverse.com/thing:2006116 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2006116 Instructions Using the following options: txt = length = 70 reed_cyl_rad = 14…
Customized version of https://www.thingiverse.com/thing:1621351 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1621351 Instructions Using the following options: bladeType = helicopter bladeOD = 100…
I'm working on right now on simple page that allow you to generate STL without need of OpenSCAD on your computer. This project allows users to create a personalized 3D text keychain. You can choose any text, and the script will…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 10 textstring1 = Have You…
Customized Purge Basket for Bambulab P1P 3D Printer Contenedor de purga para la Bambulab P1P Puedes ver el vídeo completo de mi Bambulab P1P en mi canal de Youtube:
Customized version of https://www.thingiverse.com/thing:2615842 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2615842 Instructions Using the following options: start_temp = 190 end_temp = 220 temp_step…
Fits Citadel Paint pots with a slight snap. Customized version of https://www.thingiverse.com/thing:2426089 Print Settings Printer: Qidi Tech X-Max (no longer own, I now have upgraded to a Mk3S+) Rafts: No Supports: No Resolution: 0.2 mm…
I realized the wheel center is easily replaced with a personalized motif. I created a parametrized openscad file for this purpose. Feel free to customize or use the openscad file as a base for your own creations. Default values fit the…
Customized version of http://www.thingiverse.com/thing:511489 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=511489 Instructions Using the following options: relief_height_text_box = 4 top_width_text_box…
Customized version of https://www.thingiverse.com/thing:86502 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=86502 I printed this with transparent PLA-filament in vase-mode so it can work as a diffusor…
Customized version of https://www.thingiverse.com/thing:2633015 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2633015 Instructions Using the following options: inside_diameter = 112 oring_width = 5 $fn…
Based off of ArsMoriendi3D design. I made the handle opening more ergonomically correct for my hand.
Simple model (1:43) kit card of Bigger model (Bad boy Willys) The recommended material for printing this model is PET-G, because have good plate adhesion. Good adhesion to the bed is a must for correct printing. Individual files included.…
Customized version of http://www.thingiverse.com/thing:52757 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=52757 Instructions Using the following options: plate = 311.8 top_word = text_depth = 3…
Customized version of https://www.thingiverse.com/thing:3065987 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3065987 All my Things are provided for free. Please feel free to support me so I can create…
Customized version of http://www.thingiverse.com/thing:1078216 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1078216 Instructions Using the following options: width = 45 length = 25 Round = 1 Type = 2…
Customized version of https://www.thingiverse.com/thing:3968935 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3968935 Instructions Using the following options: focalLength = 420 aperture = 83 capDepth =…
Customized version of https://www.thingiverse.com/thing:228844 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=228844 Instructions Using the following options: text = 122 hole = 3 tooth = 2 font =…
Customized version of http://www.thingiverse.com/thing:247231 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=247231 Instructions Using the following options: cone_top = 140 $fn = 60 wall_t = 2 bowl_d =…
A hand showing the metal fork or devil horns.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Customized version of http://www.thingiverse.com/thing:230139 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=230139 Instructions Using the following options: hinge_radius = 4 snub = no hinge_clearance =…
Customized version of http://www.thingiverse.com/thing:432647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=432647 Instructions Using the following options: text_size2 = 10 text_size1 = 6…
Added frets to the Neck parts of the guitar, and made a custom pattern that any printer can print for the face plates. I also included a slightly redesigned version of the faceplates that are meant to be printed “face down” with no…
This keychain can be the best way to convey your wishes to near and dear with customization.
My son loves the Hot Wheels car Boneshaker, and grabs every version that he finds. I wanted to print the Hotrod, but I knew that in the back of my mind, I would always regret not remixing it into Boneshaker if I didn't. But, since I'm not…
Customized version of https://www.thingiverse.com/thing:3121255 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3121255 Instructions Using the following options: $fn = 32 capHeight = 10 bodyHeight = 140…
Customized version of https://www.thingiverse.com/thing:2139028 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2139028 Instructions Using the following options: diameter = 50 height = 42 hose = 12…
Customized version of https://www.thingiverse.com/thing:2424769 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2424769 Instructions Using the following options: l = 500 w = 150 wall = 5 beam = 5.1…
I modified MMU2S/MMU3 parts to fix the problem with the filament sensor.
Customized version of http://www.thingiverse.com/thing:1078216 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1078216 Instructions Using the following options: width = 16.6 Type = 2 length = 35 Round = 1…
Customized version of https://www.thingiverse.com/thing:21112 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=21112 Instructions Using the following options: holeaccess = Cowling $fn = 80 smallsize = 40…
Customized version of http://www.thingiverse.com/thing:1078216 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1078216 Instructions Using the following options: length = 25 width = 16.6 height = 13 Round =…
Customized version of https://www.thingiverse.com/thing:2424769 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2424769 Instructions Using the following options: l = 600 w = 100 wall = 5 beam = 5.1…
This is a customized project box designed specifically for, and utilizing data from, @iotalight. Of course, it is free for anyone to use who finds this particular model useful. The boxes are designed to be combined using four 5mm nuts and…
Customized version of https://www.thingiverse.com/thing:3531385 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3531385 Instructions Using the following options: height = 20 width = 25 length = 40 glength…
Customized version of https://www.thingiverse.com/thing:2507177 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2507177 Instructions Using the following options: inside_width = 40 inside_length = 140…
SPACES- STL Generator is a tool that would allow you to create and download stl files. Try creating your own keychains for organization or personal gifts https://spaces.streamlit.app/
A simple mount to hang these sanding sticks ( https://www.printables.com/model/22236-customized-sanding-sticks-with-label ) to an Ikea Skadis pegboard.
Customized version of http://www.thingiverse.com/thing:218421 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=218421 Instructions Using the following options: LPropRotY = 22 LPropRotX = 22 lookUD = 0…
Customized version of https://www.thingiverse.com/thing:2491884 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2491884 Instructions Using the following options: initial_temperature = 250…
More information and details on github page https://github.com/FYSETC/Hotkey
Customized version of http://www.thingiverse.com/thing:1682427 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1682427 Instructions Using the following options: generate_details = Off structure_random_seed…
Customized version of https://www.thingiverse.com/thing:3495576 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3495576 Instructions Using the following options: Overall_height = 8 Fill_hole_size = 25.4…
a Minecraft Steve
Customized version of https://www.thingiverse.com/thing:3515810 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3515810 Instructions Using the following options: rounding = 40 font_size = 32 word1 = HOPE…
Customized version of https://www.thingiverse.com/thing:2280529 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2280529 Instructions Using the following options: widthSquare = 210 wallThickness = 0.8…
Customized version of https://www.thingiverse.com/thing:3624437 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3624437 Instructions Using the following options: unit = 1.0 volume = 236.588 label1_text =…
Customized version of https://www.thingiverse.com/thing:3483642 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3483642 Instructions Using the following options: cablediam = 4.8 lablength = 50 labwidth =…
Customized version of http://www.thingiverse.com/thing:189264 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=189264 Instructions Using the following options: bottomThickness = 2 boxWidth = 102…
Remix of the Ikea Maximera drawer box for use with Gridfinity by @Larswa_128713 that just customizes some measurements. I slightly modified the model because I don't need the top tabs and printed a bunch of different length's to fit…
Customized version of http://www.thingiverse.com/thing:1856832 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1856832 Instructions Using the following options: dbl = 1 ws = 2.8 cs = 186 dh = 0.5 dn = 4…
Customized version of http://www.thingiverse.com/thing:38819 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=38819 Instructions Using the following options: $fn = 35 cableHoleDiameter = 5 catchHeight = 1…
Customized version of https://www.thingiverse.com/thing:2481453 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2481453 Instructions Using the following options: nx = 10 ny = 5 spx = -1 spy = 4 bhh = 7 bh…
Recommend .1mm layer height for accurate threads. PETG or ASA for outdoor durability. Icons are optional. Users have reported needing to scale by up to 1% for proper fit. Update 2025/01/02: Added a longer variant for vehicles with TPMS…
Customized version of https://www.thingiverse.com/thing:47956 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=47956 Instructions Using the following options: plate_width = 1 plate_size = 0 1st_plate =…
Customized version of https://www.thingiverse.com/thing:2615842 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2615842 Instructions Using the following options: start_temp = 190 end_temp = 220 temp_step…
I use these to keep the straps tidy on my MIL-TEC bag. The larger version is thicker. Customized version of https://www.thingiverse.com/thing:1234005 Created with Customizer!…
Customized version of https://www.thingiverse.com/thing:2357653 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2357653 Instructions Using the following options: length = 5 thickness = 2 screw_diameter =…
