210 modeli
It is recommend to print laying on back and add supports for fingers only. Will need some post processing. Edited to add Big Daddy, longer legs and forward lean for a larger base and better center of balance.
Wydruk około 4,67 €–5,71 € nettoWstępna wycena jednego wariantu
This is a remake of As-seen-on-TV item, called Dust Daddy. In principle, it's just some straws and adapter. Straws should be purchased separately from the store. This version uses 9 of them, and they just friction-fit into the holes.
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate.
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water New version here with print in place jointed legs…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…
Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…
Simple self draining tray to hold a round Scrub Daddy or other 100mm dia. x 40mm wide sponge. Feet at the back prevents it from sliding into the sink and a lip at the front drains water back into sink. Position at the back of the sink…
Update 04/14: Revised design to have a flush bottom eliminate the need for supports if you have good bridging capability :) Vertical drying rack for one or two scrub daddy sponges. The grove on the bottom matches my sink but included the…
A holder for your Scrub Daddy with ergonomic drain
The Scrub Daddy! It's the Apple phone of sponges - overpriced but seemingly for good reason. I hated leaving my Scrub Daddy sitting looking pitiful on the counter top; so what did I do? I went a made a nice little mount for him! (Or her…
One part, sculpted from scratch. Suupport intensive. Category: Sculptures
Great for festivals and concerts to carry earbuds, keep your tokens safe or simply use as a portable ashtray. Excellent conversation starter. Height: 10cm / Diameter: 3cm If you’d like to support my work, leaving a ♡ like ♥ or even buying…
Scrub daddy sink caddy! BOM: Suction Cups The suction cup holes measure 14mm (outermost diameter) to 10 mm (inter diameter). See the example suction cup measurement image included. NOTE: Before printing, check to see if your sponge will…
This 3D printed sponge caddy is the perfect accessory for the Scrub Daddy sponge. Designed to keep your Scrub Daddy within easy reach while you’re washing dishes or cleaning counters, this holder is crafted to securely hold the sponge and…
Print parameters: Printer = Bambu Lab P1P Filament = Elegoo blue PLA 1,75 layer hight = 0.2mm Print temp = 210°C Wall loops = 3 honeycomb infill support = NO
For long time now, we've been using the Scrub Daddy line of sponges in our kitchen. They've typically either been set on the edge of the sink or (on occasion) stuck on the handle of the faucet using the ‘mouth’ of the sponge. I searched…
ScrubDaddy sponge holder with drain tube.
This is the same as the original adjusted to hold a thicker sponge. The original has been in my sink for about 3 months. It seems to be holding up well. I printed this in PETG at 0.2mm layer height, 3 walls, and 10% infill. The Fusion 360…
A family member asked me to print one of those scrub daddy stands that have legs, but none of the models I found fit on my build plate (100x140mm) so I decided to model one myself. I tried to challenge myself and do some curves based…
Highland Cow Scrub Daddy Holder. Drains out of mouth. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! https://www.buymeacoffee.com/honeybunny3d If you would like to sell my models please…
Printed on both a Ender 3 v2 and a Formlabs Form 3
I don't have room for that! Compact version : https://www.printables.com/model/366614-super-compact-29-pen-caddy-vase-mode
This model is a Scrub Daddy holder designed for a kitchen sink. The holder features a compartment to neatly store the sponge and has a funnel on the base. This funnel allows any excess water from the Scrub Daddy to drip directly into the…
The Glue Daddy Caddy v1. I wanted a caddy for storing my different silicone glue brushes and what not. So I made one. The handle is made to friction fit into the body (mine has been fine without glue) but you may add glue to secure the…
An adaptor that attaches Scrub Daddy sponges to a 1/4" hex shank drill.
This is my solution for attaching a scrub daddy to a cordless drill. This model features a 9mm diameter hexagonal bit connected to a scrub daddy holder tip. Should work with all scrub daddy sponges. I have the dual sided one. Works great…
A sink caddy that holds your Scrub Daddy sponge for quick access and guiding excess water back into the sink. About 85g (supports, 15% infill, printed oriented as it would sit) Print with supports
sits flush on the counter and drains into sink
UPDATE MAY 15TH 2025: I've uploaded a fully print-in-place model, no need to print the pieces separately. This one works excellent, but just note that the scrub daddy eyes/mouth portion will be printed horizontally, rather than vertically…
A sturdy stand / holder for drying and storing your Scrub Daddy or Scrub Mommy sponges, with optional drip tray and optional raisers for the drip tray. The raisers must be glued to to the tray, but this is optional. Printed mine in 0.12mm…
Allow me to present to you the epitome of smoking sophistication! Behold this marvel, boasting a 37-tree perk design meticulously crafted to ensure unparalleled water agitation. Furthermore, it is equipped with a built-in splash guard,…
Scrub daddy sponge holder - No support - Easy print - No glue - Two pieces - Easy assembly
This is a photogrammetry 3D scan I found by 3Digify, software that used cameras to construct a mesh (doesn't exist anymore). I smoothed the mesh and gave the feet flat planes so it will hopefully stand better. I also added a colored mesh…
Replacement clip for Battery Daddy organizer. I printed this in eSun PLA+ and they have held up well for a few months of light usage. If they snap I'll reprint in PETG. Support needed on the clip but not on the ribs. Note: Depending on…
My wife needed something to hold her Scrub daddy sponges. This is designed to fit over my sinks middle divider and hold the daddy/mommy sponge with the spikes for the eyes and another normal sponge on the other side. Designed so that the…
This is my first 3D print that I am comfortable sharing. I wasn't happy with other models without drains and some drains didn't fit my needs. The drain is large enough as to not impede flow and it sits nicely on the side of a sink. I used…
Ella the Elephant Scrub Daddy Holder with drain for your sink. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! buymeacoffee.com/honeybunny3d If you would like to sell my models please check…
German / Deutsch: Praktischer Scrub Daddy/Mommy Halter für Küche oder Bad. Runde Platte mit ausstehenden Augen und Mund bietet eine charmante Aufbewahrungsmöglichkeit. Hergestellt aus umweltfreundlichem BioTech PLA Weiß, mit 10% Infill in…
A handle for the scrub daddy. Designed to be printed without any supports.
The BIG DADDY opens to approx. 140mm wide and closes as small as approx. 46mm. The BIG DADDY does not sag when fully open, with a 3kg+ weight resting on the chassis. The BIG DADDY chassis prints flat, without supports. Get those depositon…
A sponge (scrub daddy) holder. It's got a flat (give or take) bottom for sitting on flat counter tops. It's ramped internally so that any moisture in the sponge will run off into the sink. Plenty of ventilation to help it dry. While I…
Print without supports, brim and raft are optional. (P.S. It looks hilarious.)
A holder for your Scrub Daddy that will drain into the sink. Gap from the edge of my sink to the wall is 5 13/16 inches or roughly 147mm so it should work for anything that size or smaller
I thought I'd gain some more experience in 3D modeling and try and recreate a common object. I recreated the Scrub Daddy sponge and miniaturized it and made a keychain out of it. This is made in 2 parts which secure together using 1.75 mm…
Recommend printing with 3+ wall layers to help keep the socket from reaming out.
Sink holder for Scrub Daddy Sponge. Can be secured by suction cups or 3M VHB double-sided tape.
What is it? Well, it's a drying tray for those awesome Scrub Daddy or Scrub Mommy sponges! Why? We use these sponges in our kitchen but didn't really have anywhere to store and dry it. So, like a lot of us 3d printer types, I decided why…
Daddy Pig cookie cutters
Printed with PETG at 0.2 mm, 25% infill with Tree Supports.
The Battery Daddy is a great organizer for batteries. Unfortunately, it only has storage areas designated for AAA, AA, C, D, and 9-volt. This design allows you to convert the D-cell storage slots into holders for a variety of button…
These 2 battery holders take the place of a D cell battery in the Battery Daddy storage box (or any other battery storage box) After all D cells are mostly for flash lights and who needs 8 of them. These holders are for CR2032 & 357/303…
For my first attempt at CAD design, I made this simple magnetic holder for a scrub daddy. Magnet dimensions Diameter: 18.5mm Height: 4.8mm When slicing, have it stop just before the layer that covers the hole for the magnet. Drop the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Yet another scrub Daddy/Mommy holder! There are many good models for this very popular scrub sponge but I wanted to add a little whimsy and a deeper drip tray. No AMS needed can be done by layer swaps. Start with black, change filament to…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Daddy Cake Legs, Tabletop DnD miniature 75 mm Huge base which can be used for DnD and other…
Slides onto a 14mm suction cup connection. Category: Kitchen & Dining
Meet Bonnie the Highland Cow , a cozy little sponge holder designed to bring farmhouse charm straight to your sink. With her soft sculpted fur, curved horns, and gentle expression, Bonnie turns your everyday Scrub Daddy into a cute…
It also has a 1mm deep slot in the back for double-sided tape to make it more renter friendly.
The inner curve of the slots grips the batteries as you press them in so there is little to no risk of them falling out on their own. You will likely need something small, such as an Allen/hex key, to press the batteries out from the…
This Scrub Daddy holder is an adorable addition to the family! It takes minimal filament and can be printed with smaller printers. Supports are recommended when printing.
Scrub daddy hanger designed for single handle faucet. Hangs in the sink to drain without taking up too much space. Print all three parts on a single build plate, no supports needed. 2.4mm tolerance for the hooks to slide onto the bottom…
Sink Soap/sponge dish with Speciality scrubber holder
Derpy Chicken Scrub Daddy Holder with drain for your sink. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! buymeacoffee.com/honeybunny3d If you would like to sell my models please check out…
Hen Scrub Daddy Sponge Holder with Drain for kitchen sink. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! https://www.buymeacoffee.com/honeybunny3d If you would like to sell my models please…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. This is a quick rendering of a Big Daddy nosecone. Not…
A nice little holder and drainer for Scrub daddy, mommy, and other dish scrubbers. Print in PETG and no support needed! It can drain the water to the sink as well if you place it close enough to the sink.
Mac Daddy custom grip for original frame with socket at the rear for brace/stock adapters. I don't think this will fit the Mac Daddy remix with the Picatinny rails at the back, at least not properly. For Mac Daddy Remix frame with the…
The Scrub Family Caddy I wanted to design something that can be modified to fit most suction up sizes. Suction cups I used were from Walmart, size small. I don't know the exact product as I bought them years ago. 4 MM Diameter of suction…
The print is designed to hold the popular Scrub Daddy sponge. The necktie base serves as a drip tray. No Color Changer required for this multi-color print. It is designed for no supports . No Glue Necessary Assembly Snap the hat ribbon…
Tired of leaving your wet Scrub Daddy or Scrub Mommy on the sink edge? This compact drying holder keeps your sponge neatly stored, elevated, and able to dry between uses. Small drainage channels and a front drip lip guide excess water…
🏹 The BOW DADDY: The Ultimate Vehicle Bow Hanger Keep your archery equipment safe, secure, and out of the way during transport! The BOW DADDY is a custom 3D-printed hanger designed to mount effortlessly to the back of a car seat,…
The 3-in Doorknob Nosecone Ebay Upgrade! Introduction: This model is an upgrade to the Estes 3-in Doorknob and to my 3-in Doorknob Builders Kit . It includes the ring that will fit inside the shoulder of the nosecone, the ebay sled, and…
PETG or ABS recommend since this will be outside most the time. I used a brim for the bed adhesion 10 walls to make the whole print walls. Left 15% infill
A mount for a scrub daddy/mommy around a kitchen tap.
A quick model i made of a Larger more Stable Scrub Daddy Holder with Strong Muscles and a Pee water drain. The feet have been enlarged
Owl Style Scrub Daddy Sponge holder. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! buymeacoffee.com/honeybunny3d If you would like to sell my models please check out my patreon!…
I moved the "arm" to the opposite side. The original is a left side clip and this one is a right side clip
As if there weren't already enough Scrub Daddy sponge models out there, my wife didn't like any of them. She wanted a simple design that would sit on the counter behind the sink - not in the sink, or over the sink. But one that wouldn't…
I've changed the maget to 2 8mm Magnets, if you use it, glue the magnes in place.
In-sink holder for the Scrub Daddy Dish Daddy, Dish Wand, Soap Dispensing Dish Brush with Drip Stand. Printed in PLA and secured to sink wall with 3M VHB Tape. Like the freebie? Please Rate and share your Make 😎
The BATHROOM DADDY! Make your father proud to display his hair loss treatment, or denture glue! Or just make it for yourself, or a friend. The TEXT is customizable (in the .3mf file) in your slicer. Or delete the text layer and add your…
same print directions as the original
Posting as a work in progress, as I don't have the Mac Daddy Remix frame printed out to check the fit. If you choose to try it, know that you may need to sand it a little. Mac Daddy custom grip for Mac Daddy remix with the Picatinny rails…
I came up with this calibration tool design after many failed attempts at getting my top surface looking right. The Flow Daddy measures input vs output of filament and gives you a flow ratio read out. Only takes about 2 minutes to preform…
Partner wanted something cute to hold our scrub daddy while it dry's
• PLA/PLA+/PLA Matte/PETG/ • 0.4mm nozzle • 0% infill + 3 walls That's it!
Stores 2 scrub daddys vertically with drainage channels
Simple mount to hold Scrub Daddy in the sink. For me it was a little bit tight for my sink divider, but after a day or so it took the shape of the sink and fits very well now. I printed with the shorter side on the bed and supports…
I needed more storage space for my AA Batteries and have no D-cell devices, so made an adapter to hold 3 AA's
Meet Ducky – the cheerful addition to the Scrub Buddy Holder collection 🦆 With his rounded shape, smooth curves and playful beak, Ducky brings a light and happy touch to your kitchen or bathroom. The integrated holder on top securely…
A minimalistic Srub Daddy sponge holder: easy to print easy to clean Draining grid to dry the sponge overnight Enjoy cleaning!
