Gridifinity Mitutoyo Calipers 500-196-30 Holder
Remix to only include slot for Mitutoyo Calipers 500-196-30
- Pobrania
- 394
- Polubienia
- 41
- Ocena
- 5
43 modeli
Remix to only include slot for Mitutoyo Calipers 500-196-30
I am teaching myself how to use Blender and wanted a more defined skeleton for SLA printing. Print instructions Printer: Elegoo Mars Rafts: No Supports: Yes Resolution: 0.025mm Infill: 100
This is a simple 3 by 1 Gridfinity cardholder for 10 cards.
1x1 gridfinity bin to hold six m2 2280 ssd and two m2 2230 ssd
Just the four nozzle storage bin based n Gridfinity system with the addition of the space for the heat sink in the new nozzles. Not stackable as the original (no lip), 2 x 2.
Printed in PLA. Filament use: 187.28g Print time: 6h10m Printed on an Elegoo Neptune 4 Plus it is a 7X2 gridfinity and may not fit smaller printers. 0.20 Layer Height 8% Gyroid infill 3 wall loops 4 top layer 3 bottom layer
Only 2 meters of filament required, which is a quarter of what you get for posting a make on Printables! No tuning required. Flys 60 to 100 feet. Works with almost every filament! 100% infill, supports on build plate only. Rubber band…
Gridifinity Holder for Klein Tools J2000-9NE Side Cutter Linemans Pliers
An remix of a storage for a mechanical caliper, with gridifinity standards (6x2x3). It is stackable.
I used a couple other folks' designs to slap together a holder for my multimeter, the Kaiweets KM100. It has space to hold the probes, as well as some alligator leads, or other things. this fits gridfinity 2x3. Thanks, and Happy Printing!
Gridfinity bowl for Bosch Drill GSR 12V
Remix of metric gridifinity gauge measuring set. Made it in imperial for us stuck with American units.
Simple 3x4 Baseplate for using with screws in order to save magnets.
so simple it should fit most of the files. Feedback are welcome !
Gridifinity Kraftprotz Glue holder, 1x1 non stackable Thinkercad link: https://www.tinkercad.com/things/0dsL10ImjW6-glue-holder-kraftprotz-gridifinity Edit 12/04/2025: Based on requests, the model is now less tight and allows to pick the…
Few models attached to this. Frist of all - the snap on attachment. I was trying to make simple snap on which i can use when printing cut in half long gridifinity parts so I can put them together easier. You can use it as negative on one…
Gridifinity Citadel Paint 1x1
Increased the space since the cheap knock-off I have of the multi-meter is 25mm deep instead of 24mm as in the original.
I always wanted to try out the fantastic gridfinity system. But I always thought, that the bases are way to material consuming. After finding and printing this optimized version ( Optimized Gridfinity Base: Faster, Smarter, Better! by…
Simple 3x5 Gridifinity bin for the Groz set of four machinist's squares (2", 3", 4" and 6"). Printed in PLA on a K1 Max with a 0.6mm nozzle, took 2hrs 4min to print and used 147g of PLA filament. I bought my square set at busy bee tools:…
Kobalt tools- this is a holder for a majority of the socket sets (Sizes listed in summary) Based on the 42mm grid and 16mm inset for the sockets to lock in nicely so theres less rattle in the toolbox.
I've long used the 101 Use Fish Cup as a scrap container in my 3D printing class. Now we have a Gridfinity dock!
Gridfinity baseplate to attach to either side of the enclosure. Prints without supports. Mirror the part in the slicer to create both ends of the part - there will be a screw in the middle that is half in each model. Secure to the…
This model provides a compact and efficient storage solution for the Remarkable 2 9-tip replacement card using the popular gridfinity system. The design occupies 1x3 gridfinity slots, ensuring it integrates seamlessly with your existing…
This is a rather large tray for my Wera 454 HF hex wrenches. This model is sitting ontop of a large 4x7 gridfinity baseplate from @Stu142 . I added labels for the different sizes and there are also cutouts on the back, to make the labels…
I hate a cluttered desk, and mine was getting there. I had all this wasted space on top of my old mac mini. I made a gridfinity baseplate using the fusion plugin and a frame to hold it in place. Since I tend to collect business cards and…
Two different versions of organizers for commonly used 3d printing tools and supplies, both with gridfinity bases. One holds 2 ounce IPA spray which can be purchased on amazon and at some larger stores. The other holds more commonly…
It holds a TI-89 calculator.
Wanted to store a set of small spools of 22AWG wire (55mm x 20mm) and solder in my workbench drawer and found this model but added a central flange to hold the wire ends.
this is my gridfinity box rack it holds the 5x4 gridfinity rugged cases it also was clips to lock the cases in it requires a large printer 300mmx300mm hardware 2 m3 bolts for the carrying handle onshape link…
Gridfinity bin for my 1x3 Mr. Pen Sticky notes ( Amazon link ). I have some gridfinity bases glue onto my desk for easy organization, and I find that a 1x3 sticky note is more useful than a full size. I did manual filament changes as I…
This is a set of Gridfinity organizers to hold the Seal Lite 3d scanner, and the power adapter. The power adapter is very snug so i might replace it, but it was also very easy to model the adapter for the cut out. I added finger room on…
gridifinty storage for a parkside digital tape masure
This is is a Gridfinity holder for a #2 Swage-It tool for nicopress swaging of 1/16", 3/32", and 1/8" wire rope cable. This has many applications including aircraft control cables, boat rigging, garage doors, etc. If you find yourself…
This is a Gridfinity box made for Harborfrieghts ICON 3/8 in. Drive Metric Professional Long Ball Hex Bit Socket Set, 8-Piece. This set is designed to stand up the hex bits, as they would otherwise take up too much space. This is an easy…
This model features a fully customizable width for a 20mm diameter SMD tape holder. The width can be specified (in FreeCAD) via the VarSet.tape_holder_width parameter. Also, the number of tiles the grid occupies can be set with the…
Gridfinity bin for CRKT Ritual Ivory knife. Printed on a Bambu Labs X1C using Bambu PLA Matte Charcoal and the standard Bambu 0.20 Standard print profile.
This allows you to clamp down your grindinity plats to keep them secure, while still allowing for use with the modular desk clamp system
Gridifitny storage for cam clamps
I always wanted to try out the fantastic gridfinity system. But I always thought, that the bases are way to material consuming. After finding and printing this optimized version ( Optimized Gridfinity Base: Faster, Smarter, Better! by…
Just the four nozzle storage bin based n Gridfinity system with the addition of the space for the heat sink in the new nozzles. Not stackable as the original (no lip), 2 x 2.
This is a Gridfinity box made for Harborfrieghts ICON 3/8 in. Drive Metric Professional Long Ball Hex Bit Socket Set, 8-Piece. This set is designed to stand up the hex bits, as they would otherwise take up too much space. This is an easy…
This model features a fully customizable width for a 20mm diameter SMD tape holder. The width can be specified (in FreeCAD) via the VarSet.tape_holder_width parameter. Also, the number of tiles the grid occupies can be set with the…